Reviews
Quality is good, but accuracy is subtle.
The quality of the carbon itself is fine, but the accuracy of both SIDES is not so good. The tank cover itself is difficult to install, because it is made in the shape of the tank cover, and the gap is inevitably caused by the thickness of the double-sided tape. Well, I think every manufacturer has this kind of accuracy.
Tolerable.
View detail
Carbon has a nice texture, but ...!
The quality of Carbon is good and luxurious, but as you can see in the image, Tank's Quantity:Pair (for Left and Right) There is about 1 to 2mm of float in the part of the Curve of the I wish it was a little fitter. View detail
Made of dry carbon, but the price is reasonable.
I waited six months and finally received it.
I don't know if it is because of the times we live in, or if it simply takes longer to burn dry carbon, or if it is just until the orders accumulate, but I had to wait quite a while.
Previously, we used Magical racing's Carbon, but it was about 2mm thick and we were concerned about the bumps.
This product is dry carbon, which means that it is thin but does not get saggy under pressure.
Quantity for installation:Pair (for Left and Right) I could not install it without dropping the corner of the Also, there seems to be some distortion and the area where the knee hits is floating.
Double-sided tape may be better to be water-stretched and fixed for a while 。
However, the floating part became a hook, and it became easier to support the body, which was a pleasant miscalculation.
The reverse side is bare carbon, so I scratched the tank a lot when I took it on and off a few times.
Also, Tank Pad seems to be very selective about products because of its shape, and the one I had purchased could not be applied in the regular way.
Fitting would be even easier with a parts cleaner and a leutor for degreasing.
View detail
Since the tank pad with wide breadth was looked for, the tank pad of this a-tech was used. The size was felt as about 90% of result for carbon. However, it is dry carbon, and it is very beautiful and attachment is also easy. It is satisfactory
Since the tank pad with wide breadth was looked for, the tank pad of this a-tech was used.
The size was felt as about 90% of result for carbon.
However, it is dry carbon, and it is very beautiful and attachment is also easy.
It is satisfactory if PITTASHI is not expected to a tank 100%.
It will be *5 if OK is thought at about 80%.
View detail
It doesn't fit perfectly
I bought it because I didn't want the Tank to get scratched
It was written to cure and install the Tank when it was installed
It is not in the Instruction Manual, but the side cover has to be installed I guess I'd better
There is a gap between the Exclusive Design And if you make a mistake in installation because the product is sharp in FRP
Scratches on the tank In fact, the scratches have increased compared to before installation
View detail
good
I had to widen the plate's retaining hole on the tank during installation I shaved off a few pieces to match the cowl
I was very happy when I opened it up and held it in my hand after waiting for it to arrive, but when I looked closely at it, I noticed a few spots of white blurring There were a few white blurred spots and one spot on the surface [Color] I found some cracks in the Clear
It looks like mine was a Ha Gap. It was less of an issue than the seam in the middle, so I kept it I'm on it
Once I put it on, I was satisfied with the appearance of Large
There is a creaking sound when I knee-grip it
View detail
Only visible Impact
Although it is very easy to install, OEM Cowl has three places, Screw 1 pc and Magic tape, this product is one place and a slightly somewhere Tension is applied, so when it's hot it is Magic tape's The Double-sided Tape is peeled off and a gap is created between Tank and Cowl.
I will arrive at restraining it, but after a while I am away - - - State.
In any case, there is no choice but to figure out why it takes Tension.
As for performance, nothing changes, it is a product only for Impact.
Because there are not many people wearing it, it may be good for Items.
View detail
It purchased to the Wound prevention to the Tank by Jacket metal fittings. Since he disliked the pattern of the Carbon, the product made from FRP was used. Since the products were black gel states, originally they would be painted, but since c
It purchased to the Wound prevention to the Tank by Jacket metal fittings.
Since he disliked the pattern of the Carbon, the product made from FRP was used.
Since the
products were black gel states, originally they would be painted, but since color matched that it was troublesome, it equipped with them by no painting.
Although
attachment uses attached double-stick tape, only 10 mm in width and four about [ die-length 300mm ] things are not attached.
Is it effective if it sticks where of a Cover inner surface on which a Curve is drawn delicately? It has wavered just for a moment.
Moreover, probably because this Tape is thin, it does not adhere firmly with the existing uneven back side of a Cover.
A Tape will separate here and there.
From the first, since a Parts of this sort does not have accuracy to the extent that it fits exactly that there is no crevice in a Tank, if it is a very experienced direction, the Recommendation of leaving wearing to a PRO is carried out at any rate.
View detail
This product attached simultaneously with new car delivery of cars. It was dramatically beautiful and was protecting the Tank from the Buckle firmly at the time of . It is in the serious state like [ whenever it passes through , however day
This product attached simultaneously with new car delivery of cars.
It was dramatically beautiful and was protecting the Tank from the Buckle firmly at the time of
.
It is in the serious state like [ whenever it passes through
, however days and months ] a photograph now in which the surface begins to crack... (is each Carbon product of smile
FRP reinforcement such a thing? the double-stick tape of
attachment is powerful, and it does not separate in now.)
View detail
Since interference of length from the crotch to the cuff was worrisome in tank pad purchase, what has a large size was chosen. A size is just fit and its sushi appearance is also good. However, since double-stick tape is cut by itself and attached
Since interference of length from the crotch to the cuff was worrisome in tank pad purchase, what has a large size was chosen.
A size is just fit and its sushi appearance is also good.
However, since double-stick tape is cut by itself and attached when equipping, some time and effort is taken and the flood of rain water is also worried [ how it is and ].
It is slightly expensive a little.
Therefore, I was allowed to consider it as a three stars.
View detail
Although it becomes adhesion with double-stick tape, tank both sides will float inevitably. Is it individual specificity? But the parenthesis of carbon is good too! Type R is worried.
Although it becomes adhesion with double-stick tape, tank both sides will float inevitably.
Is it individual specificity?
But the parenthesis of carbon is good too! Type R is worried.
View detail
It's cool, makes my bike look good but was sad to find that to install it double sided tape is used.. that's all. And there is a gap in between it and the tank where dust can get collected. I am worried about the tank the day I decide to remove it.
It's cool, makes my bike look good but was sad to find that to install it double sided tape is used.. that's all. And there is a gap in between it and the tank where dust can get collected. I am worried about the tank the day I decide to remove it. View detail
It's cool, makes my bike look good but was sad to find that to install it double sided tape is used.. that's all. And there is a gap in between it and the tank where dust can get collected. I am worried about the tank the day I decide to remove it.
It's cool, makes my bike look good but was sad to find that to install it double sided tape is used.. that's all. And there is a gap in between it and the tank where dust can get collected. I am worried about the tank the day I decide to remove it. View detail
It's cool, makes my bike look good but was sad to find that to install it double sided tape is used.. that's all. And there is a gap in between it and the tank where dust can get collected. I am worried about the tank the day I decide to remove it.
It's cool, makes my bike look good but was sad to find that to install it double sided tape is used.. that's all. And there is a gap in between it and the tank where dust can get collected. I am worried about the tank the day I decide to remove it. View detail
Here's the pic.. didn't work last time
Here's the pic.. didn't work last time View detail
They are perfect dress-up (potted plant) parts up. Although stated as the weight saving compared with the pure aluminum plate, the direction from which the in-vehicle tool was taken down becomes a weight saving. (^omega^) Appearance is good. T
They are perfect dress-up (potted plant) parts up.
Although stated as the weight saving compared with the pure aluminum plate, the direction from which the in-vehicle tool was taken down becomes a weight saving.
(^omega^) Appearance is good.
There was no gap of a hole.
coming out not too bad -- the shin.
The rest can compromise with a price or is only ?.
View detail
He wanted the tank pat with wide breadth, and it decided on this product of the a-tech. Although it is an object for daegs, and the best fit was expected from the tank, a crevice is made in part too. Although I also regard a thing without the tech
He wanted the tank pat with wide breadth, and it decided on this product of the a-tech.
Although it is an object for daegs, and the best fit was expected from the tank, a crevice is made in part too.
Although I also regard a thing without the technique of attachment as one cause, a degree is OK custom.
When it thinks that it is satisfactory in about 90% of attachment condition, the using feeling of this product is GOOOD.
View detail