Reviews
The Parenthesis quality is further enhanced by replacing the Front and Rear Set.
[How is it used?
KSR-II Front Fender. A-TECHFront FenderSPL I wanted to install an inner rear fender after replacing the fender with an A-TECH fender, so I purchased the same A-TECH product to balance the design.
Was the one you received as per Image?
Parenthesis is good as well as Down fender for Front!
I chose Plain Weave Carbon for the Rear to match the Front, and I was so satisfied with the Large product that I drooled over its parenthesis and its image.
Was the installation difficult?
It is less difficult than the Front Fender, and can be installed by a Large-size person by referring to the included Instruction Manual for installation.
How was your experience with it?
To be honest, this is a component that was not originally included in the OEM. Parts I wouldn't be without." I think it will reduce the amount of mud and other debris that bounces off the Tire when it rains (I haven't driven in the rain, so I'm just guessing...) As I've mentioned above. Custom parts that improve the appearance of the parenthesis. It is
[Included Parts:were they on?
Rear FenderBody, Bolt and Tie Band for fixing, and Instruction Manual for installation are included.
[Was there anything that disappointed you?
None at all! It's on the back of the Fender. Black diamond I couldn't stop grinning until I took the Rear Fender out of the box, attached it to the car body, and looked at it from a bird's eye view.
Other items that would be helpful
Point and hang of installation
There is nothing difficult about it. Just follow the basic installation instructions as described in the Instruction Manual for installation and your custom is complete.
[Availability and clarity of the Instruction Manual
As mentioned above, an instruction manual for installation with illustrations is included in the package, so please read it carefully before installation.
[Notes]
There is nothing in particular, but handling with force may cause deformation or cracking, so handle with care.
[ITEMS TO BUY TOGETHER
The Parenthesis quality is enhanced to the extent that it is annoying when the Front Fender is also unified with the same material of the company.
If you can, buy the front and back Fenders at once.
[Opinions and requests to Manufacturer
Please continue to sell them as much as possible, as they are valuable custom parts for KSR-II, which has few exterior custom parts.
View detail
Just plain Cool.
[How is it used?
When I was searching for aftermarket parts on Webike to install a down fender to refresh my KSR-II that I have owned for many years, I found this product and bought it on the spur of the moment because it was on sale at Timing. I found this product at Webike when I was searching for aftermarket parts.
Was the one you received as per Image?
I purchased Plain Weave Carbon, the cheapest in the series, but it was still cool enough!
It looks like a racing machine even though it is a motorcycle used only for street riding (though it is only the owner's prejudice), so it is unbalanced against the cute KSR, but still, cool is justice.
Was the installation difficult?
The NORMAL model is an Up Fender, so to install a Down Fender, use the Attachment included with this product, but it is a bit of a puzzle, so check the illustration in the Instruction Manual before assembling it temporarily.
How was your experience with it?
I don't feel any change in functional parts in daily use. If I drive at 160km/h or more, I think I can feel the difference in straight line stability etc. from Up Fender, but I don't have such performance, so I can't experience it.
Also, Fender itself is larger than NORMAL, so no matter how lightweight the Material:There will be little to no weight difference in carbon (and it is not made of Dry carbon).
It just looks cool!
[Included Parts:were they on?
Attachment that fixes FenderBody and Down fender is Quantity:Pair (for Left and Right) 1Quantity in:Set, with accompanying Bolt for fixation included.
[Was there anything that disappointed you?
Not at all.
Luxury. Twill Weave Carbon Ya Carbon Kevlar There are higher-end products made in Japan, but they are also priced higher, so you will have to consult with your Wallet.
Other items that would be helpful
Point and hang of installation
Quantity of Attachment for Down fender:Pair (for Left and Right) It was difficult to understand the "1" in the installation instruction manual, but if you look carefully at the illustration in the instruction manual, you will be able to understand it, so I think you will have no problem installing it if you do a temporary assembly after confirming it before final fixing.
[Availability and clarity of the Instruction Manual
An illustrated Instruction Manual is included in the package, so if you are not confident, please read through it carefully before starting work.
[Notes]
If left exposed to sunlight for a long period of time, the UV rays, etc., will cause deterioration and sometimes the Clear layer on the surface will peel off (have you ever seen a vehicle with CarbonBonnet installed that has an unfortunate surface?) (Have you ever seen a vehicle with CarbonBonnet that has a disappointing surface?
When not riding, protect them from UV rays with UVCut Body cover or Garage storage, and give them moderate care.
[ITEMS TO BUY TOGETHER
If you purchase the Rear Fender with the same momentum, you may further enhance the Parenthesis quality.
[Opinions and requests to Manufacturer
This may not be the best selling product because of the vehicle, but we would appreciate continued sales whenever possible.
View detail
make a different impression
It is a shorter design than OEMFender, and just changing to this one changes the impression quite a bit.
I think it works very well with HALF COWL.
To install the bracket, you will need to use the bracket with nut that comes with the OEM Fender, or if you do not have one, you will need to prepare the nut and bolt separately.
The accuracy was slightly distorted, and the installation had to be done while stretching to fit the holes.
Although it looks good at a glance from a distance, the nature of Carbon makes it unavoidable, but resin cracks are quite noticeable, so for those who are concerned about them, FRP ones are recommended.
View detail
Beautiful ^ ^
The make-up described in the impre? Quantity in:Pair (for Left and Right) I found that the balance of the Tire was not good, but I was able to install it while looking at the clearance with the Tire. I was able to install it while watching the clearance with Tire, so it arrived at Beauty easily ^ ^.
Rubber Washer was added to prevent cracking and Button bolt was replaced.
View detail
Very satisfied
Livré vers la France ---------------------------------------------------------- Delivered to France Powered by Google Translator View detail
A-TECH・Carbon rear fender
[How is it used?
Used for SEA BASS GSX1000 KATANA (19 years old)
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
The best texture. This is indeed an A-TECH product.
Material:The Rear area became much more Race ish by replacing the Plastic Normal fender.
[Included Parts:were they on?
No
[Was there anything that disappointed you?
No
Other items that would be helpful
nothing special
View detail
Machining and installation
Except for ATEC and OEMRear Fender, there is some modification for installation.
Required:Handlebarter in Straight andQuantity in File:The set was cut and installed in conjunction with TSR's Rear Fender. The effect is to shut out the large stepping stones.
It also came with a MotoGPMachine.
This product is to be mounted downward on the Swing Arm.
This is a downward facing Rear Fender.
View detail
I put up a Sticker.
I installed it on my zrx1200ZrX1200 DAEG. I chose the Standard Type Fender for the design. I am very satisfied with the quality and precision of A-TECH. I also put a BLACK DIAMOND Sticker on it. I was a little bit worried about the Plastic Spacer when I installed it. View detail
It is the best texture
I purchased the Dry carbonMODEL. It took about half a year for delivery, but the quality of the product is excellent, as expected from A-TECH, and it is very beautiful. Compared to normal fenders, it is very lightweight and the shape is very parenthesis. View detail
Quantity:Pair (for Left and Right) The design of the "M" is excellent!
There are well-designed Fenders from other manufacturers, but Quantity:Pair (for Left and Right) This is the only design that can cover up to the Swing Arm of the
The delivery time was six months, but I had waited eight months before, so I was prepared for that, but it was delivered in one month!
Parts accuracy is also fine and can be installed in less than 5 minutes.
View detail
It is a very light Fender.
First of all, it should be noted that the Front Fender of the Z900RS is difficult to replace unless the Wheel is removed.
If you plan to do the work yourself, we recommend that you prepare to remove the front wheel by removing the front stand or other means.
As far as I know, this product and Moto Corse's Front Fender are the only ones that are integrally molded.
The one-piece molded Fender has large parts, but it is made of dry carbon, and although there are individual differences in the HandLayer, the single body weight is only 168 Grams.
However, the Gold Bracket of the Brake hose is surprisingly heavy and the Quantity:Pair (for Left and Right) In total, the Fender was 212 Grams.
Fender in NORMAL is 338 Grams including Bracket, resulting in a difference of 126 Grams.
In my case, when combined with GALE SPEED TypeE, the effect of weight reduction under Spring was 880 Grams for Wheel and 126 Grams for Fender, which is just about 1 kg Gram.
I don't know if it is possible to compare the effect on public roads with certainty at my sensitivity Level, but if I follow the textbook, it would mean that Large strange effect should be obtained.
Finally, the Bracket of the Brake hose is supposed to be reused by destroying the Rivet, but even if you buy a new Bracket, it is only a few hundred yen for new Parts. it is recommended to use a new Bracket to avoid Wound, injury, and other unnecessary Risk and Stress.
View detail
Full A-tech
Well designed and well fitted, Brake line is fixed slightly higher than OEM
Required Items for full SPL conversion
View detail
Full A-tech
Good design, good fittings, easy to clean due to long length.
Required Items for full SPL conversion
View detail
Full SPL
Well designed and well fitted, Brake line is fixed slightly higher than OEM View detail
Full SPL
Fitting is good, slight bending is acceptable, but be careful of paint cracking when tightening due to loose molding around screws, good design View detail
It was worth the wait!
It took 5 months to deliver, but the quality and design are both excellent.
The equipment was made on 1Rank.
View detail
A tech carbon fender
I have an 07 zx14 front wnd on my 2001 zrx1200 turbo bike and over the years i have tried to fit many different fenders to bike, none of the fenders had the right shape to fit body lines of my bike until i purchased this fender, Atech is an extremely well made fender and very high level quality of carbon fiber parts View detail
Solid construction.
Tie Band secured to Swing Arm
I was a little bit BigLiZed at the
I am satisfied with the design.
Body color painted DIY and installed.
I'm satisfied
View detail
Parenthesis is as good as you want it to be.
I decided on Brand based on the impressions. It took a long time to deliver the product, probably because it was handmade. I think anyone can easily install it if there is enough room in the mounting hole. View detail
One point
High-quality product.
The high machining accuracy allows for easy installation.
Rear Fender, so it was not a casual replacement.
I don't think anyone but the person himself would notice, but it is a world of self-satisfaction.
It is solid and durable, so it can be used for a long time.
View detail