Reviews
Four places to fix Fender
Four places to fix the Fender are thicker than the OEM, so the gap is large. Even with installation rattling.
Because I could not do anything, I fixed the Urethane sponge so that it stuck to the fixing gold fixture and pressed so that the problem was solved.
But, is not this a design mistake? - - - I think that Spacer and Bush should be attached.
View detail
Tightening Screw too much [Color] Clear paint breaks.
Tightening Screw too much [Color] Clear paint breaks.
I have to tighten it lightly [Color] Clear paint will peel off. Anxiety as to whether Screw will not come off by vibration.
Installation is immediate and no problem.
View detail
Fixing Screw is few and Gap is Large.
Because there are only three Fixing Screws, Gap occurs and the clearance is Large.
Disappointed. Cover is unnecessary because it is necessary, but it seems to be fixed only with Tape.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Somewhat cheap
Somewhat lacking Speed ??of response to ordered items
Slow response to questions when in trouble?
Because I have to check the editing contents by myself and do not have to tell me immediately I want e-mail.
Slow response to mistakes.
View detail
Rear Fender Carbonization is ImpactLarge
? 【What made you decide the purchase?】 Unlike OEM SMART shape Material : Carbon has a proper chain guard and it looks so cool.
? 【How was it actually used?】 There is no effect on running, self satisfaction when stopping is Large width up.
? 【Was it difficult to install? (Hard parts case)】 Just remove 4 Screws and close them with the attached Screw. Extremely easy.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】 Attachment of Nylon washer included
? [Is there anything I was disappointed about?] Because the hole position was slightly out of alignment, there is a portion to bend.
? [Request to Manufacturer - Please let me know if there are any improvement points】 I'm glad that you can make a little more round of processing. It is a shape that can make scissors.
? 【Have you compared items?】 Magical racing's Fender. I decided on the presence or absence of Chain guard.
? [Others] OEM's Aero shape is also cool, but I think Orthodox like this shape is cool.
View detail
Design is good
Following NINJA 2 Helmet 50 R R of the previous car NINJA 2 Helmet 50 R. Attached to 2018. I love Design, but if I just attach it, Center will not be. Mounting Bracket part was shifted to Right little by little while center was released.
View detail
Lightweight Alternative
Adds an open airflow design and light aspect to the Hayabusa front streamlining . The compact shape matches the stout exhaust quite well on this particular example . The guard also benefits greater air flow to discs and calipers , aiding cooling . View detail
I need a little workmanship
Delivery date arrived earlier than 2 months had been.
I bought the FRP, it was okay to keep it glowing, but painted with frosted black.
As everyone comes in contact with Tire as Imple, Washer on Chain side Quantity : 1 Set of 4pcs. Adjusted so much.
I like it..
View detail
Attached to DAEG, Style got better!
Installation is really easy.
If you clean the installation location
Installation is completed in a few minutes.
If you attach the Rear Fender, the more you wear the Under rear fender, the better the Style will be.
View detail
Along with Fender Eliminator
I installed it with the same A - TECH Fender Eliminator Kit.
Installation itself is BoltQuantity : It is only 2 pc and 3 Tie Wraps so it was completed in a few minutes.
We can not see glittering or interference at the moment.
Finished in a refreshing Rear.
Material : I bought FRP with Black Gel, but since the finish is originally beautiful and it is not a part that is nervous, Color : It is attached as unpainted.
View detail
I'm getting better
The machining accuracy of the Bolt hole and the Blinker installation part was very good, there was no problem concerning the installation, Material : FRP with Black Gel But the surface was finished very beautifully.
LED License Plate Light and Mounting Bracket, with Reflector License Plate Mounting Bracket is also included and feels very conscientious.
Oh well, I write only good things, but there was also a place saying what about this.
The first one is difficult to understand Instruction Manual. Roughly, Standard's Fenderetc. Removing the Fender Eliminator Kit, installing the Fender Eliminator Kit, returning the removed one, only about it is written.
The second one is that it will not be possible to remove it immediately even with the LED License Plate Lamp attached.. Separately, I bought Moto Crazy's LED License Lamp Set.
At the end is the gap with the Tail lamp. Tail lamp also made by SP Takekawa and not OEM, so I thought there was some error, but the gap of about 10 mm at the top has been emptied. This was a shame. At a later date, I will try to fill it with a gap Tape or something.
I also did not dislike Original's Rear Fender, but it became a clear look with the Fender Eliminator.
The processing accuracy of the product itself, the appearance is very good, I like it.
View detail
TireHousing and Rear shock are also safe with dirt prevention
Before attaching Rear Fender, Tire Housing and Rear shock were also dirty with mud splash, but after attaching it almost never get dirty, Maintenance of dirt removal became easier. Also, since Rear shock is almost uncleaned, I think that it will lead to prolongation of oil leakage. Since installation inside Housing is narrow, it is better to remove Rear tire and remove it : Because it is Carbon, I think that it can be installed without hurting without hurting around here. View detail
Things are good, but I hit it..
180 / 55 / Zr 17 When wearing it rubs the Tire at the position of the exon.
Spaceretc to escape. Enter, it hits the car body.
I plan to find out Chain cover in the future.
It's too bad I'm cool.
View detail
(Upper part) Whether it is necessary to use it with outside Rear Fender - - -
With OEMFender, this Under rear fender alone has little effect in preventing contamination around Rear.
As for mud dirt around Rear, OEM Fender is too short, it is the cause of the biggest Large,
The most effective way to prevent dirt stains is to have some length (Top) It is Rear Fender.
This Under rear fender, by blocking the opening in front of Swingarm,
Catalyzer Included Prevents contamination in the vicinity.
By using the external Rear Fender and this under rear fender together, more
I think that it is a product that demonstrates the effect of mud soiling prevention.
My car keeps installing the Catalyzer,
When I sat down the Rear suspension, I was concerned that the tip of this Fender would rub against the Catalyzer.
View detail
Accuracy is bad
As Carbon lover I first bought Dry carbon.
2 months and 2 months from order to delivery
I came when I forgot.
Tire Left will come into contact with you as it is.
Bite Spacer to the mounting position on the Chain side and pull it to Left.
Although it may be distortion in the production process, this accuracy is a bit disappointing for the price.
We are also considering replacement by another company.
View detail
Beginner installation attention
Looking at the manual first, Rucksack ery and Large There is only a miscellaneous explanation. Hurdle is high unless it is not experienced to some extent. My purchased type was Twill Weave Carbon. Although the texture is high, due to the nature of Material, some distortion is slight, but it will occur. This distortion affects the clearance with the Tail lamp. In order to decide Clearance perfectly, it was quite Large strange that it was File, Bolt to stop Tail lamp, Spacer to bite, and so on. When the other party is C
I wrote about only various negative parts, but the texture is high
I am satisfied.. The mounting angle of Number is
Should be a bit somewhat sweet, but would you interpret it as a person who has a little margin can ride it in front of the superior (^^)
View detail
Rear feeling appeared around Rear.
When I attached the Fender Eliminator Kit to H2, I was concerned about the texture of Rear Fender by Refreshing around Rear.
When this product was installed I got a sense of quality around Rear.
I think that it can be reproduced in a well CarbonMaterial the NORMAL shape of.
It was fitted exactly without machining at the time of attachment which tends to be on Carbon cowl class of A-TECH.
Compared to other Carbon cowls, the price was suppressed for Large Kimono, so I felt Cost performance is good. (Although the Hey Guard who purchased at the same time and the Large room are quite different, the price did not change so much. )
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It is good?
We have adopted the company made by Rear so we also combined Front. It is excellent in Cost performance no matter how much it is! It is also beautiful twill weave and satisfactory quality. Since Bolt was Silver, I replaced it for Black and it became cooler View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Good Cost performance
We adopted the company made for Front fender so we also adjusted Rear. The shape is neither possible nor impossible, Carbon is also beautiful and Cost performance is good. Clear Because it is not finished I did CR - 1 Spray. I was able to install with high mounting accuracy and fine adjustment, just as Bolt seemed to float on Silver as well as Front so I changed it to Black. Up to Chain cover This quality and price are pretty good! View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Cost performance is good!
We also adopted the company's Front fender so we also adjusted Rear. I think that this quality and price are pretty excellent with regard to the shape that is safe, Chain cover. Clear Because it is not finished I did CR - 1 Spray. Bolt hole also modified slightly (Hole expansion Large degree) And since Bolt is Silver like Front, I changed it to Black. By the way, Size is 4 FrontM 6 × 15, Rear is same SizeQuantity : It is 2pc. I could not find an image that I could easily image on Net View detail