Reviews
Increased windshield effectiveness.
I purchased this product for the purpose of reducing wind effects when driving at high speeds.
OVER Separate Handlebars interfere with the Throttle Cable and the Tank of the Master Cylinder.
Handlebar is installed back to OEM (without Spacer).
Well nuts (C-440) are used to join the Base and Screen sections.
The experience of installation is that the posture is shallower than OEM, where the benefit of drag reduction is achieved.
The effect is not that noticeable in the normal posture, but the reduction was noticeable in the sticky prone position.
About the appearance (FRP Black, [Color] (Select Option in Clear)
The Luster feel is good, but as you can see from the light reflection in the Base area in the photo, the surface preparation is a bit lax.
if you are concerned about [Color] It is best to purchase without Clear and paint after priming.
The Screen section is not distorted in any strange way, and it is nice to know that this is also available as a Single Body.
It seems to be #Made-to-Order, so the delivery time may take a couple of months.
View detail
?????
Installation is easy even for beginners.
Used in combination with MRRACING's Number Seal Cowl
After all, it is aerodynamic and moves forward.
Better extension at high RPM range.
View detail
?????
Installation is easy even for beginners. View detail
Repurchase.
At the time of the first 25R, there were not many options and I purchased this one, which was also installed on KawasakiDemonstration vehicles.
It's been two years since then and all the companies have released their products, but I don't like the rounded design, so I'm going back to it after all lol.
View detail
Processing required
It will stick if you put it on as is, but … the corners will float.
The hole on the front side was enlarged with a stick file while observing the position of the hole by placing it against the cowl based on the hole on the front side.
Two in the middle row (Quantity):Pair (for Left and Right) The first two holes in the upper row were enlarged toward the center, and the two holes in the upper row were enlarged toward the front (in the direction of the middle hole).
It is an easy material to shave, so it is not that difficult, but the corners still float a little.
The screen shape is rounded, so the center of the screen may be concave and the corners may float due to the straight line between the expanded tension and the fixed position of the front side.
It might be a little better if you put urethaneetc. from the back between the holes on the front side to make the center part thicker….
The texture is very good. It is a thicker, solid Material and heavier than it looks.
The outer edge is Blackout like OEM, so the color of the Cowl will not show through.
Screen color is [Color] Smoke
*Late 400 Bikini cowl is common with 1100 and 1200.
View detail
The shape is fine.
I had been interested in this product for a long time, but had long put it off because I came across a great deal on a MRA Screen spoiler about three years ago and bought that one. However, I had been putting it off for a long time because I came across a great deal on a MRA screen spoiler about 3 years ago and bought that one.
I liked the Screen spoiler, but I was thinking it was time for an Ime Chain, so maybe it was a good Timing.
As for the PRO Screen, there are almost no reviews, and the only images I could find were of it installed on a DAEG, so when I installed it on a zrx1100 What if it's not the Image?" I had some misgivings, but in terms of design, it was exactly as I had Image and very much to my liking.
The screen spoiler could be installed without any stress by simply placing it on the cowl and fastening with screws, just like the OEM screen spoiler, but with the PRO Screen, the front ends lifted up when aligned with the cowl, and the screw holes were not aligned in several places. However, the PRO Screen was impossible to install as it was because the front ends of the screen lifted up when matched with the Cowl, and the screw holes were not aligned in several places. I thought about asking them to replace it, but it was too much trouble, so I decided to modify the screw holes. When we matched the two screw holes on the front side, three of the remaining four screw holes had to be modified, and the worst one was gapped by one screw hole. The processing itself is not difficult since it is just a matter of using a file to cut and widen the holes, but I had to do this to a brand-new product, which caused a large mental damage. I put it on the cowl several times, checking the position of the screw hole, and carefully shaved the screw hole to avoid cracks.
I like the shape, but this was a disappointing purchase. The instruction manual included in the package said that it is handmade and may have some distortion or need to be corrected, but I did not expect that it would need to be processed like the dubious cheap products it is. I was disappointed.
View detail
The transparent Screen portion is unreachable.
I received the Carbon mounting base.
[Color] The Screen portion of Clear is not included and cannot be used.
The delivery date was originally scheduled to arrive in February, but was suddenly changed to June;
but arrived today (April 10).
When checked upon arrival, the Screen was not included.
If the product has a long delivery time, the contents should be properly checked and shipped.
I will not buy any more products from this Manufacturer.
View detail
Screen Replacement
It was replaced from OEM. The effect as a wind shield seems to have increased because of the increased length, but the impression that can be felt is a high speed range.
Light smoke is OEM. [Color] I saw an imprecation that it was brighter than Smoke. [Color] I went with Smoke, but it might be a little darker than OEM.
It is a thing that I knew, but the front became a very heavy feeling. It's my preference, but as a styling, it might look better if it's refreshing like OEM...
The accuracy of the machining was good and the installation was not particularly confusing or troublesome.
View detail
It is a good product of the system
I like Screen. [Color] I bought it because it is clear and I admire the shape of motoGP
Installation was very easy with no distortion or gaps like the OEM product!
Optically, it has a high degree of perfection and maintains a distortion-free field of view even through the Screen.
I will be able to assert that the satisfaction of very high quality is a product that can be obtained enough!
View detail
Fits: KAWASAKI ZX-25R
Products as expected
I had the impression that Screen was kind of squashed since the announcement.
I prefer the shape that I am used to seeing in MOTOGP, and the effect and difference are
Because I do not take it into consideration, I pursue only the ease of use of self-satisfaction and preference.
I don't care about rectification effects or CD values.
The product is so precise that even a beginner can install it without any problems.
In my case, because I used a transparent plastic Screw for the visual aspect of Bolt.
The well nut was not crushed and it became the shape as it is.
I'm planning on replacing it with a Well nut or clear plastic nut soon.
The quality of the Screen itself is very high and smoothness is better than OEM, I am satisfied.
Scratch resistance cannot be reviewed without repeated use for a certain period of time.
I'd like to add a note if I get a chance, but with some cloth degree of wear.
No problem at all, non-Scratch Coating or not, no announcement.
I don't understand it, but from the User's point of view, it's a Large Cost.
ManufacturerIf you are sincere, you should do the coating process…
Or I think you should use Plexiglass. Maybe.
For the price point, Plexiglass may have already been adopted.
In modern times, Plexiglass is a base acrylic material, so the name is not clarified.
The material name is listed as Acrylic, but the actual strength is 15-18 times stronger than any
The material is strong enough to withstand scratches and is also used for RALLY50 parts for four-wheeled vehicles.
The name "Manufacturer" is a bit more in-depth than "Material", which is not commonly used.
I feel that you may want to explain Material.
When it comes to Screen, SS series with Cowl, Scooter system, etc.
OEM has no Coating and no Material improvement at all, it's just the same old thing.
"I just wiped it with Towel. Small scratches and pickpocketing Glass.
This is not a review of this product, but each manufacturer is not responsible for the quality of their products.
We also want you to understand that we are not making any effort.
View detail
Good color.
Buy AquaPurple.
This image appears to be Blue at some angles.
Unlike the rainbow blue that is often seen on TitaniumScreen, this is a light color that is less flashy and gives a calm impression.
View detail
Poor accuracy, requires machining
If the mounting holes do not fit, the Instruction Manual states that the holes should be machined, but this is not a Level to be fixed by File.
I reworked it in three places and installed it a little tight, but when I ran it home, it was cracked. I'm not sure if I pulled a HaGap on some lots.
My installation skills are at fault!
View detail
Good consistency with the body of the car.
Bubble type looks like Tosaka or Cobb, so I went with this one.
I think this one looks better with the right-angle 25R design.
The 25R can take Screen without removing the UpperOwl, so it only takes 5 minutes.
I had to put a driver in the hole and align it, but the installation accuracy is fine.
I chose the Light smoke, but it's about half as thick as the OEM Smoke Shield, if it's as good as the OEM. [Color] Smoke might be a better choice.
The minus point is that the tip protrudes more than the OEM, so it looks a little uneven when viewed up close.
I would have preferred to have had a MoldRubber because the section was left uncut.
OEMs used to have to get down to about chin level to get inside the boundary, but now they can get inside if they lean forward lightly.
View detail
I am satisfied
I was happy that it arrived earlier than the scheduled delivery date.
The fact that the edge of the combination of the carbon and glass parts is floating and the combination with ATEC's MeterBase is a little bit bad is a little bit of a concern. Overall, I like it.
View detail
Customer service is perfect.
I have previously mentioned in the in-box that the screw that connects the mounting section and the screen section interferes with the meter cover inside, and that there is a screw that cannot be attached. I reported this to the manufacturer and he agreed to replace it with an alternative one. I don't know how well the replacement is doing, but I feel relieved to know that the manufacturer has taken this action.
I can recommend it to my friends.
View detail
I can't get the Screw to stick.
Overall, it is Small size. The bolt which connects the screen and the mounting part, but it will not be able to be attached to the outside. I do not think that there is no way to attach it except by shaving the meter cover in it. View detail
I could have installed this on the first time
I bought the Black in FRP
Motorcycle was FrontBlack in the 2014MODEL, so
I had no problem with the FRP The product actually came
Checking
It took me a while to install it, but I usually don't use the well nut
It was hard to tell which way to install it because I don't use it
Also, when you install the Screen, you can use the
As shown in the picture, the mounting base is replaced at the bottom
By the way, it can be mounted on a middle mounting base
Look for a delivery time of about two and a half to three months
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3
It's a dedicated screen You can choose one
What made you decide to buy?
Duct Side Cowl SPL for Race (1 Set of 4-items) and I bought it because I needed a special Screen
How was your experience with it?
It would have been better for me personally if it was with Stages It is
Was it difficult to install? (In the case of hard parts)
It's not difficult to install as you just need to attach it with a well nut
What is the point or hang of installation (for hard parts)?
Just stick with it like it is and you're good to go!
[Was there anything that disappointed you?
Exclusive Screen The price is surprisingly high
Do you have any wishes or improvements you would like to make for the Manufacturer?
I wanted Screen to be able to use the OEMs well
[Do you have any products to compare it to?
If we talk about the wind resistance part, it's compared to OEM, Zero gravity and ACRYPOINT
This is the only one available, so you can't choose a step and the color is only in the rear The price is quite expensive, so I think people who buy this screen have already bought the exterior It's a good idea to consider the Total Gold amount and compare it to others
[Others]
The shape is circular so the wind seems to flow through it It would have been nice if there were more steps
View detail
Looks and functionality are pretty good
The good thing is that the long wind protection effect is totally different compared to OEMs anyway, the wind protection effect is much better for high speed driving It also eliminates fatigue and stress for Large The appearance may be a matter of taste, but the Carbon trims are covered to the Light I quite like that it's being done
If you want to raise the point of disadvantage, you have to push it in with force when you install it Will it break? I felt uneasy with the idea that I was going to be able to stop it with Screw It's around when things get in
View detail
Looks like Race ish
I wasn't particularly unhappy with the OEM Screen, but I wanted to change the look of it, so I replaced it I'm very happy with the look, I'm glad I went with Race ish The wind protection is the same as the OEM View detail