Reviews
Increased windshield effectiveness.
I purchased this product for the purpose of reducing wind effects when driving at high speeds.
OVER Separate Handlebars interfere with the Throttle Cable and the Tank of the Master Cylinder.
Handlebar is installed back to OEM (without Spacer).
Well nuts (C-440) are used to join the Base and Screen sections.
The experience of installation is that the posture is shallower than OEM, where the benefit of drag reduction is achieved.
The effect is not that noticeable in the normal posture, but the reduction was noticeable in the sticky prone position.
About the appearance (FRP Black, [Color] (Select Option in Clear)
The Luster feel is good, but as you can see from the light reflection in the Base area in the photo, the surface preparation is a bit lax.
if you are concerned about [Color] It is best to purchase without Clear and paint after priming.
The Screen section is not distorted in any strange way, and it is nice to know that this is also available as a Single Body.
It seems to be #Made-to-Order, so the delivery time may take a couple of months.
View detail
Processing required
It will stick if you put it on as is, but … the corners will float.
The hole on the front side was enlarged with a stick file while observing the position of the hole by placing it against the cowl based on the hole on the front side.
Two in the middle row (Quantity):Pair (for Left and Right) The first two holes in the upper row were enlarged toward the center, and the two holes in the upper row were enlarged toward the front (in the direction of the middle hole).
It is an easy material to shave, so it is not that difficult, but the corners still float a little.
The screen shape is rounded, so the center of the screen may be concave and the corners may float due to the straight line between the expanded tension and the fixed position of the front side.
It might be a little better if you put urethaneetc. from the back between the holes on the front side to make the center part thicker….
The texture is very good. It is a thicker, solid Material and heavier than it looks.
The outer edge is Blackout like OEM, so the color of the Cowl will not show through.
Screen color is [Color] Smoke
*Late 400 Bikini cowl is common with 1100 and 1200.
View detail
Good color.
Buy AquaPurple.
This image appears to be Blue at some angles.
Unlike the rainbow blue that is often seen on TitaniumScreen, this is a light color that is less flashy and gives a calm impression.
View detail
Good consistency with the body of the car.
Bubble type looks like Tosaka or Cobb, so I went with this one.
I think this one looks better with the right-angle 25R design.
The 25R can take Screen without removing the UpperOwl, so it only takes 5 minutes.
I had to put a driver in the hole and align it, but the installation accuracy is fine.
I chose the Light smoke, but it's about half as thick as the OEM Smoke Shield, if it's as good as the OEM. [Color] Smoke might be a better choice.
The minus point is that the tip protrudes more than the OEM, so it looks a little uneven when viewed up close.
I would have preferred to have had a MoldRubber because the section was left uncut.
OEMs used to have to get down to about chin level to get inside the boundary, but now they can get inside if they lean forward lightly.
View detail
I am satisfied
I was happy that it arrived earlier than the scheduled delivery date.
The fact that the edge of the combination of the carbon and glass parts is floating and the combination with ATEC's MeterBase is a little bit bad is a little bit of a concern. Overall, I like it.
View detail
Customer service is perfect.
I have previously mentioned in the in-box that the screw that connects the mounting section and the screen section interferes with the meter cover inside, and that there is a screw that cannot be attached. I reported this to the manufacturer and he agreed to replace it with an alternative one. I don't know how well the replacement is doing, but I feel relieved to know that the manufacturer has taken this action.
I can recommend it to my friends.
View detail
Looks and functionality are pretty good
The good thing is that the long wind protection effect is totally different compared to OEMs anyway, the wind protection effect is much better for high speed driving It also eliminates fatigue and stress for Large The appearance may be a matter of taste, but the Carbon trims are covered to the Light I quite like that it's being done
If you want to raise the point of disadvantage, you have to push it in with force when you install it Will it break? I felt uneasy with the idea that I was going to be able to stop it with Screw It's around when things get in
View detail
Looks like Race ish
I wasn't particularly unhappy with the OEM Screen, but I wanted to change the look of it, so I replaced it I'm very happy with the look, I'm glad I went with Race ish The wind protection is the same as the OEM View detail
An excellent and beautiful product from Active. Very nice titanium coating making the surface look shine and colorful under sunshine. It won't block your sight behind the screen because transparency is also very good even at night time. However, don't u
An excellent and beautiful product from Active. Very nice titanium coating making the surface look shine and colorful under sunshine. It won't block your sight behind the screen because transparency is also very good even at night time. However, don't use dry cloth to clean or rub the screen hard, it may caused scratch mark even the coating is hard. View detail
The color is not attached than expected although color is a Gold.It sees rapidly and is visible like a then CLEAR.It was comparatively easy although the Mirror also needed to be removed for attachment.
The color is not attached than expected although color is a Gold.It sees rapidly and is visible like a then CLEAR.It was comparatively easy although the Mirror also needed to be removed for
attachment.
View detail
If there is no Rubber attachment of attachment, does he have the individual specificity attached ordinarily about attachment? Like [ in the direction of others ], processing has been attached without carrying out. it is quite the atmosphere of an Image c
If there is no Rubber attachment of attachment, does he have the individual specificity attached ordinarily about attachment? Like [ in the direction of others ], processing has been attached without carrying out. it is quite the atmosphere of an Image change ます SS vehicle after attachment View detail
[ -- the Webike Monitor ] -- he is indebted to Mr. A-tech again. It is a Trim screen of twill Carbon. This is a Type put from a Normal screen. Although the attachment process itself is easy, the we Mirror will be changed int
[ -- the Webike Monitor ]
-- he is indebted to Mr. A-tech again.
It is a Trim screen of
twill Carbon.
This is a Type put from a Normal screen.
Although the
attachment process itself is easy, the we Mirror will be changed into the external article and a Mount portion will interfere a little.
About it, it can attach satisfactorily by easy processing.
View detail