Reviews
Parenthesis is as good as you want it to be.
I decided on Brand based on the impressions. It took a long time to deliver the product, probably because it was handmade. I think anyone can easily install it if there is enough room in the mounting hole. View detail
Good appearance and Hold feeling
I thought it was just the appearance, but when I got in the car, the hold feeling increased and made quite a difference.
In particular, the increased height makes it easier to place the belly on the tank and enables a three-point hold with both knees and belly.
Recommended for middle-aged people with a belly, but beware of reflux for Hard brake immediately after a meal.
All of A-TECH's products have a larger gap than OEM products, and there is a small gap between the tank cap and the cap.
A sense of unity can be achieved by matching it with A-TECH's Side cover.
View detail
a little regret
This is a review of z900rs 21 year old ebony color genuine muffler vehicle installation. All A-Tech sticker manual bolts The reason is that even though the product is genuine, the holes did not fit well, so I tightened the bolts and then loosened them. I repeated the attach and reload. Other than that, I had a little trouble aligning the holes, but nonetheless, I installed it without any additional processing. I'm at a loss as I'm thinking of unpacking and installing it again on the ,,, ,,, This is a review of z900rs 21 year old ebony color genuine muffler vehicle installation. First of all, what is the under cowl heat dissipation sticker? A-tech sticker manual bolts are all There are pictures and descriptions in the manual, but it would be better if the pictures were a little more detailed. It is stated that the working time is about 30 minutes, but it took less than 2 hours with two people because it was the first time I installed it myself. The reason is that, despite the fact that the product is genuine, the holes did not fit well, so I tightened the bolts and then loosened them. I repeated the adda. Other than that, I had a little trouble aligning the holes, but I installed it without any additional processing. When I put it on, it definitely looks more full, it's pretty and I like it. However, I am thinking of unscrewing it and installing it again at the next engine oil change interval. It's hard, it's more than that,,,,,,, View detail
Beautiful
Fantastic! Very good workmanship, it gives the bike a racing look and weighs half the weight. Very satisfied. Atech is never wrong View detail
The transparent Screen portion is unreachable.
I received the Carbon mounting base.
[Color] The Screen portion of Clear is not included and cannot be used.
The delivery date was originally scheduled to arrive in February, but was suddenly changed to June;
but arrived today (April 10).
When checked upon arrival, the Screen was not included.
If the product has a long delivery time, the contents should be properly checked and shipped.
I will not buy any more products from this Manufacturer.
View detail
Quality is high
The design feels like an OEM Product that fits snugly and is not uncomfortable.
The Carbon was also thick and solid and did not crack.
The installation itself is a highly accurate product that can be bolted on with a bolt.
Anyone can easily replace it from Full Cowl.
I can recommend it
View detail
One point
High-quality product.
The high machining accuracy allows for easy installation.
Rear Fender, so it was not a casual replacement.
I don't think anyone but the person himself would notice, but it is a world of self-satisfaction.
It is solid and durable, so it can be used for a long time.
View detail
need to be corrected
FRP was selected because it is intended to be painted. Mounting holes can be made without modification. Overseas Material:It is better than FRP products, but there are holes, scratches, etc. If you are concerned about them, I think you need to fix the Pate. I corrected the pate. I think the workmanship is good. I am concerned about the heat effect of the engine, but I put heat-resistant Seat on the inside of the engine. It may be just for comfort. View detail
If the installed Exhaust System is incompatible, it may require a lot of modification.
It seems to be incompatible with the installed Exhaust System and required quite a bit of modification.
The design is very good and I am satisfied with it.
View detail
I think the installation would have to be done by a PRO.
Currently CB1300SC4 Parenthesis is a good idea, but it requires a sander to modify the bracket, and the only way to install it is to ask a motorcycle shop to do it for you. The wires and connectors are also large enough to put together. The Bracket is fixed to the Radiator, so if it rolls over, the Radiator will be damaged. This time, I had to order a special Bracket to use the STD Blinker. (A-TECH does not do this for us.) The paint on the Bracket is also messy, so I think it will rust quickly. But it looks cool, so it is irreplaceable. It took 6 months after I ordered. I have to endure the long delivery time. Overall, I am satisfied with the product. I like the fact that I can buy it at a lower price from WeBig. View detail
A little modification was required for installation.
It is not a problem if the exhaust pipe, intermediate pipe, or silencer is customized and needs to be cut down, but it is necessary to cut down the STANDReverse side because it interferes with the installation of the STANDReverse side. Why?" I thought
The paint job was quite large and odd because of the large area. Considering the finish and the time and effort required, I thought it would have been better to use painted products or carbon, so if you are not confident about self-painting, I recommend that you use that method.
I like the shape, but I guess that depends on your taste.
The Swing Arm with Stubby OVER is in good condition without Limit interference.
View detail
The presence is not overwhelming.
It is very beautiful and easy to install, but may interfere with an external exhaust system. I modified it with Grinder. It is easy to remove and does not use tie wrap like other products, so it looks beautiful and has a high quality feel. View detail
Perfect for XJR
A-Tech Twil wave carbon for Yamaha XJR 1300. Part is exellent quality and final finish of the prodilict is immaculate. Fitting is easy as the part is exact match for frame. EXELLENT View detail
Easy Dress-up
Fitted on a CB1300SB SP (2018).
It is very easy to install. After removing the Bolt at the bottom of the Under Cover, remove the Under Cover with the Side Cover, remove the 3 screws that hold the Under Cover in place, replace it with this one, and install the Cover in the reverse order. Tighten the Bolt and you are done.
Carbon is still good for Parenthesis.
As for the installation accuracy, it's not perfect, but it's about as good as it can be (personally).
This is a common story for this type of product, and as long as it is not OEM, it is difficult to produce a perfect fit.
It was not difficult to install, only that some Screw holes were slightly misaligned (we had a slight misalignment of the outer Bolt).
I am satisfied with the cosmetics and Large.
As for durability, I don't know.
For longer use, RubberWasher may be used for the Bolt portion.
View detail
For summer
It looks good, but the position of the inner pin does not match, except for the mounting Screw.
Need to be machined or otherwise processed.
View detail
Great quality, but long long shipping
Product is very good, Awesome But... I recieved this after 16months .. but good :) very very satisfied Covid 19 go away!! View detail
The estimated date of arrival has passed?
It's past the expected delivery date, will it still take longer? View detail
Large Wide weight reduction
It can be lightened to Large width by replacing the OEM headlight unit when running in Circuit.
In addition, the power supply to the Headlight will be eliminated, leaving more room for power generation.
It is easy to install and does not require any special processing.
If you are using an external handlebar, you will need to pay attention to the routing of the brake hose.
View detail
A-Tech's Rear Fender
When using the Fender Eliminator, water and mud splashes inevitably occur on the engine side. This part will prevent this from happening. Highly recommended! View detail
Received and happy overall
There was a 6 mth delay to get product made, but it was made and shipped within approx 2.5 months. Excellent email updating all the way from webike. Product was well packed. I got the black plain and the black gelcoat was a bit thin along a couple of tight edges but quality of glass was good. Holes did not quite line up but very near, and with a bit of coaxing it all went together. I could not get the final pushpin holes to line up enough, so haven't bothered with pinning those. Quite secure without them anyway. Now I can work on the bike without pulling off the large lower cowlings all the time. I do very little cold or wet riding nowadays. I confirmed the fit to OEM upper cowling before purchase. All up I'm very happy with the purchase and the service I have received. View detail