Reviews
Satisfied with functionality and appearance
I think it's a good costumer
It may be the cheapest Stand Hook with Slider function.
View detail
Swing Arm Protection
It doubles as a Stand Hook and Slider.
A light fall will provide protection.
Large falls make the bosses flinch.
That's right
Because it is easy to use.
I would like to modify the mounting Bolt.
Installation is a cinch, as only Screws are required.
View detail
Protect Axle Shaft and Arm.
[How is it used?
Purchased for fall protection. It mainly protects Axle Shaft and Swing Arm. (For protection of the entire body, it should be used in conjunction with Engine Guard or similar.)
Was the installation difficult?
Bolt On makes it easy.
How was your experience with it?
After tightening the bolt, the Roller was a little reluctant to move, so I greased up the Spacer section a little.
I don't know how it works with Racing Stand as I don't have it.
View detail
Material:Plastic is sufficient.
With Gold, you will be disappointed when scratches appear while using the product.
Material:I like Plastic because it doesn't show any crumbs and is very simple.
View detail
A-TECH Earplugs
At a quick glance, the texture is no different from TRI*ST*R and this Slider.
The packaging is insanely kind, protecting the Screw part with Tape to prevent Garbage, etc. from sticking to it.
StickerQuantity as a bonus:1 Set of 2pc.
Just in time for earplugs, man! (This product is HookSlider. Good kids don't copy it!)
View detail
CBR1000RR-R SP Slider
When I received the product, I thought it was too large and the design was not so good.
Once installed, it fits the car body and is quite good.
View detail
Slider for both Stand Hook and Slider, so it may be safe.
I don't know how effective Slider is, but I expect it to be.
It is perfect for the Stand Hook function.
A collar is included to prevent interference with the car body when using Stand Hook.
View detail
For dress-up purposes
I have RFender in Carbon, so I bought this to tighten up the Rear area.
I heard that many people were having trouble installing the swing arms, but I was able to easily install them by temporarily attaching them to the front of the swing arm and then shifting them to the rear.
I'm not going to Circuit, so it's a complete dress-up. (Lol) 。
But it was hard to wait six months………
View detail
Used with J-TRIPStand Hook
The size of the bolt is Exactly M8x50 P1.25, which is included with the J-TRIPStand Hook. View detail
Swingarm spools with sliders
I needed some spools to lift the rear of my Suzuki SV650 with my race stand for maintenance and this product served that purpose with the added bonus of also protecting the motorcycle in the event of an accident. View detail
Cospar good
Simple and easy to install, and the construction is reasonably solid.
I like that it's not too assertive in terms of design.
View detail
It's a gem!
I bought it for the parts I needed to do the race
KevlarCarbon is selected for support
It's easy and cool because all you have to do is bolt it on
It's not too expensive, so it's a good dress-up
View detail
A-TECH Chain Guard
Excellent quality with no flaws as expected, tidy's up the rear section by replacing the oem plastic guard that fades over time. Definitely worth the value. View detail
Fits: KAWASAKI NINJA250R, KAWASAKI NINJA400
Small looking Slider
It looks like a Small Slider
It's a simple shape, but it's a nice touch
In terms of performance, because it rotates like a roller, it is
When using the Maintenance Stand
Raising it is more than the normal MaintenanceBolt I used to use before
It's easier to raise it
View detail
It also has thermal insulation effect Material : Carbon Style is also Parenthesis good.
Twill Weave Carbon I bought a pattern.
TL 1000 R, Without Heat Guard,
Although it may be thought that a hot thigh burns when it is hot,
With a Heat Guard it will not get hotter.
it's recommended.
Since it is fixed with double-sided tape, when removing Suspension, Bolt will be hidden, so it is necessary to remove it.
View detail
I had it mounted onto my motorcycle when it was still brand new. Just as I suspected, I had a fall when driving at high speed with the motorcycle that I wasn't yet used to at the time. It was scratched hardly but the engine had no damage. I left it sc
I had it mounted onto my motorcycle when it was still brand new. Just as I suspected, I had a fall when driving at high speed with the motorcycle that I wasn't yet used to at the time. It was scratched hardly but the engine had no damage. I left it scratched more than 10 years and decided it was a good chance to replace it with a new one. The instruction for use is written in hand writing and is inconsiderate. Well, I was lucky to know what to do. The spring washer was also out of stock. The one I got years ago had mounting holes located in the wrong position and I had to get holes opened, but this time they were in the right position. It might have improved. Also a rubber plate is attached to the mounting section. It maybe for anti vibration. The mounting screws have changed from black screws to plated screws. Guess they have improved during the years gone by. When mounting, you have to hold the engine with a jack to remove mounting screws. Also you'll need a long extension bar and universal joint to tighten the screw on the front left side because the exhaust pipe will get in the way. View detail
Cool!
Worked at the same time as Tank sideGuard, so we removed the Cowl and installed it. Parenthesis is nice.. I do not know the effect of summer, but it looks great! SIDE looks tight. There is no problem with mounting accuracy, Instruction Manual, Included Parts : Also gathered. View detail
Luxury feeling increases
Purchase to hide the fact that the foot rubbed against the front when Rear Sets were not wearing and the paint of Frame had become slippery.
I have never felt that Frame is getting too hot from the beginning, but this will not feel any more.
There are other similar products, but most of the other companies are considering servicing or things that are empty Type is mostly. But I do not touch the Bolt of that part, especially if there are no holes, the part to be cleaned is reduced (Lol) Select this Type.
Luxury feeling also increased, it is cool anyhow.
From now on, other parts are also Material : I think I will increase the number of Carbon items.
View detail
Safety and Dress-up
For safety and Dress-up, I bought it this time.
I used to run Circuit well since before, and to prevent the involvement of hands on Rear sprocket when falling, I also attached it to other vehicles.
I feel like the product name is Sprocket guard rather than Drive chain guard? - - -
With Chain guard, what kind of things are on the Swingarm?
(Manufacturer name like name but www)
I talked about it,
In 14 R there is no plan to run Circuit,
This time, I purchased it as a Dress-up effect.
In Circuit, common sense = general road, cognitive deficiency
I feel like it, there are not many people wearing it. I mean
Installation is done with a single Bolt.
With 3 minutes, I'm done www
However, because it will be attached to a curved surface with the shape of 14R Swingarm,
If you tighten it too tight, the upper part of Bolt seems to dig into it and I'm scared.
I painted the Screw lock agent and gently tightened it www
This time, Material : I ordered FRP, pasted Carbon StyleSeat, made it Carbon style.
safety - Dress-up effect - Circuit It is only a good feeling and a car feeling ♪
(It is an impression of an individual www)
View detail
Diversion to ZrX1100
NINJA400 [NINJA400] , I sold what is sold for NINJA 650 to ZrX 1100.
Brake side is 5mm Spacer attached, Don Pischa, Chain side further 5mm Spacer is put in will surely eliminate negotiation between STAND Hook and Swingarm. (Although it can be used without adding 5 mm, we made room for it. )
I feel that raising the STAND has become easier because of the Roller formula. STAND on hand is old and it is saved because there is no Tire.
View detail