Reviews
Processing assumptions?
The position of the screw holes did not match, which may have been an individual product difference, so I used Leutor to shave them down to match. View detail
Shorter stud bolt
sv650a 2017. shorter than swing arm width. about 3cm. i had to buy, cut a stud bolt to install. fortunately the bolt is standardized product, so DYI was easy View detail
It's a different model of car, but it's not impossible to use.
[How is it used?
I used it on my YZF-R25 that I use in Race because it is required to be installed in Race regulation.
Since the delivery date for the R25 was long, I chose this one that was in stock.
Was the one you received as per Image?
I'm very happy with it.
Was the installation difficult?
It is very easy to co-tighten with Bolt.
I could have co-tightened the Stand Hook Bolt, but it would have been too far back on the R25 to make sense.
As you can see in the picture, it's lame, but I used Universal Bracket to bring it to the front side.
How was your experience with it?
It does the bare minimum of what I need it to do. Unfortunately, I'll be going to Spare when I receive one for my R25.
The upper side should be secured with Swing Arm and Double-sided Tape.
[Included Parts:were they on?
Comes with a 6Bolt
[Was there anything that disappointed you?
Not particularly
I don't really recommend it, because it's not a Manufacturer-inspired installation.
I think it can be used for any kind of car depending on your ingenuity.
The accuracy of the product was not bad. It was thick enough and chunky enough.
You can use it with confidence in terms of strength, and Bolt can be tightened firmly.
View detail
For Regulation.
It is installed for race regulation.
There are various types of Chain Guard, but the only type of Machine I have is the one that is co-tightened to the Rear Stand Receptacle, or the one that mounts to the Swing Arm by drilling a hole.
To be honest, I don't feel comfortable with the Swing Arm type that makes a hole in the Swing Arm, so I bought this one. To be honest, I don't feel comfortable with the Swing Arm type, so I bought this one.
By co-tightening, the position of the STAND receiver can be changed to QUANTITY:Pair (for Left and Right) You can use a spacer, such as Washer, for the other one. Balance is better.
View detail
Because of race regulation
I bought these because race regulations require the Sprocket guard to be installed.:Choose FRP with Black Gel.
This is a type that co-tightens with the Bolt on the STAND receptor, so it's quite easy to use.
Some sprocket guards have a hole in the swing arm. Personally, I think the latter type is more sturdy than the former, but I don't feel comfortable with this type.
View detail
Be careful if you are using a ZrX catcher!
I bought this because I wanted to get the type with slider function It was able to install with no problem, but I used ZrX1200 for JTripSTAND and JTripZrX Please note that you cannot use Bracket if you are using a receiving Bracket and Slider hits and I can't lift up I bought this without any hesitation because the fitment for each car model was available, but I didn't think there was such a pitfall It was It's certainly not a problem to fit it, so it's fitfully malleable, but it failed... I drove it into the wall of the Garage I made it into a hat rack with LOL! View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
It was just as it was supposed to be
I was looking for a new Motorcycle that I bought that didn't have a Stand Hook The one made by the Gold genus has a beautiful finish, but the scratches were noticeable when it was used Material:I looked for and bought it in Plastic
I haven't used the STAND yet, but I'm comfortable with the look and feel of what it looks like It looks like it can be used
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
I am wearing it once. - - -.
I am wearing it once, but it is almost inconspicuous Parts.
It is a place I can not see, but it was good if the shape was a bit more Slim.
Parts that I do not want to take care of.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
The SUZUKI GSX1300R-HAYABUSA 2002 model was equipped. It purchased in order to dress up with Carbon design. It is thin although the Design is good -- I was glad when thick to a slight degree.
The SUZUKI GSX1300R-HAYABUSA 2002 model was equipped.
It purchased in order to dress up with
Carbon design.
It is thin although the
Design is good --
I was glad when thick to a slight degree.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Although the slider was looked for, every goods were only what must make a hole in a cowl. Since this product substituted for the existing bolt, the hole resulted in purchase in the thing that it is not necessary to open. Since it only substituted
Although the slider was looked for, every goods were only what must make a hole in a cowl.
Since this product substituted for the existing bolt, the hole resulted in purchase in the thing that it is not necessary to open.
Since it only substituted for the existing bolt, exchange did not finish not taking 5 minutes.
Since it is not large to there, when a motorcycle falls, it is an unknown how much effects there are.
He does not want to carry out the coca of the motorcycle, if it can do, or to push down, and it is sushi.
View detail
Since only the slider of the off vehicle had been seen when it saw at first, it was felt as slightly small kana. Common ? attachment is dramatically simple for this extent in case of a street motorcycle.
Since only the slider of the off vehicle had been seen when it saw at first, it was felt as slightly small kana.
Common ? attachment is dramatically simple for this extent in case of a street motorcycle.
View detail
It purchased for the damage mitigation at the time of falling. Since there is a damping force adjustment mechanism, I consider [ liking to guard firmly and ] a front fork bottom part. Since attachment needs to exchange a front axle bolt for exclus
It purchased for the damage mitigation at the time of falling.
Since there is a damping force adjustment mechanism, I consider [ liking to guard firmly and ] a front fork bottom part.
Since attachment needs to exchange a front axle bolt for exclusive elegance although it is easy, it considers it better for there to be a torque wrench and a service manual.
View detail
Emergency insurance was thought and it purchased. Attachment does not take 5 minutes using the wrench of simplicity and attachment very much. I think that there may be height of a slider to a slight degree. I feel that a swing arm hook hits pr
Emergency insurance was thought and it purchased.
Attachment does not take 5 minutes using the wrench of simplicity and attachment very much.
I think that there may be height of a slider to a slight degree.
I feel that a swing arm hook hits previously.
Since it will be OK if there is no damage in a main part even if which hits well, it does not care.
View detail
Appearance (design) purchase was carried out rather than having said that it is functional. If a bolt is tightened and it is crowded too much, it is crushed, and although it is fixing using a maintenance-stands hook bolt (?), since that is right, hone
Appearance (design) purchase was carried out rather than having said that it is functional.
If a bolt is tightened and it is crowded too much, it is crushed, and although it is fixing using a maintenance-stands hook bolt (?), since that is right, honestly [ if attachment is very easy, it is, but ] he would like to reinforce and obtain.
They are four stars if a price is cheap to a slight degree.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
The peregrine falcon purchased in medieval times was equipped. A peregrine falcon is quite severe thermally, and its heat is dramatically hard if it fits into traffic congestion especially in summer. Since it seems that the frame itself generates
The peregrine falcon purchased in medieval times was equipped.
A peregrine falcon is quite severe thermally, and its heat is dramatically hard if it fits into traffic congestion especially in summer.
Since it seems that the frame itself generates heat considerably, to the peregrine falcon, I think indispensable parts with it being individual.
Since it becomes tight black also in design, I think that it is not bad.
However, since all the fever that naturally goes up only by this cannot be prevented, I consider [ having just called it the parts it is made not to burn with a frame to the last and ].
I will think ..., even if cheap to a slight degree, when it carries out.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Since a hot blast cannot be prevented [ since it cannot attach and do unless it removes a cowl, ] unless it is becoming tame, and it can go into difficult kana and the crevice which comes out a heat insulating material from the place of a thigh as operati
Since a hot blast cannot be prevented [ since it cannot attach and do unless it removes a cowl, ] unless it is becoming tame, and it can go into difficult kana and the crevice which comes out a heat insulating material from the place of a thigh as operative too much, when following a heat guard, let's buy a heat insulating material too much. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
The necessaries (?) of a peregrine falcon. It is a frame heat guard. Attachment by double-stick tape. The frame of the peregrine falcon which makes a fried egg if nothing is done. Heat can be intercepted to the grade which will be touched
The necessaries (?) of a peregrine falcon.
It is a frame heat guard.
Attachment by double-stick tape.
The frame of the peregrine falcon which makes a fried egg if nothing is done.
Heat can be intercepted to the grade which will be touched if Colet is followed.
As there is merely individual specificity considerably, as for that [ one's ], the step circumference is not attached exactly.
The answer it is such specification when a manufacturer is asked.
I think that it is not specification rightly since that of the BUSA friend who is close is attached exactly.
If the product of A-TECH has quite delicate accuracy and it orders, let's pray that a good thing comes.
But twill carbon is beautiful.
I think that twill will prosper most if carbon is used with much trouble! Probably, it should equip with the direction troubled by heat.
View detail