Name: [Closeout Product]Mono Lock Case B47 Series[special price]
Brand: GIVI
SKU: 25970866
Price: 14811.000000 THB
Availability: InStock
Rating: 05 (1 reviews)

Specification

control number:20365441
Collar:Pearl white paint [B47B912].
[Capacity:47Liter]
Size:30L.. .445X570X340mm
Hose Mounting Screw Pitch:Approx. 4.6kg (including Base)
Maximum Load Capacity:3kg
Included Parts::UniversalBase
Without stop lamp

Description



Insert the key into the key cylinder.	Turn the key to Right (3 o'clock)..	Press the red oval button at the top of the key cylinder..	Flap with the word "PRESS" floating in the air..



Make sure that the key is inserted and turned to Right (3 o'clock)..	With the key turned to Right (3 o'clock), press down on the upper part of the triangle mark (* mark) and lock the key as if you were moving it down..	After locking the lid, turn the key to Left (12 o'clock direction) to lock the buttons.. If the key is removed in this state and all the Buttons are locked, the lid will not be able to open or close.. After this, please be sure to lift the lid slightly to ensure that it is locked.


	If you can't unlock by pressing RedButton on the key cylinder (Flap doesn't open), RedButton is retracted to the back (Flap half-locked state).. In that case, please cancel it by the following procedure.


How to unlock the Flap semi-lock state


When the flap is half-locked, the lid is not locked.. There is a resistance, but please pull it strong and open the lid.	Remove the lid to reveal the Flap of the lock section..	Tilt the flap part of it backwards.	Flap returns to its home position and the semi-locked state of the Flap can be released..


	With the upper pig open, align the Case to the Base. Lock the bottom of the Case with the Right hand while lifting the Base with the Left hand.. Especially for small type cars, since the rear suspensions are soft and it may be difficult to securely lock the suspensions by just pressing them down from above, please be sure to install them in this way..


	How to unlock the lock to Base

	After locking Case to Base, please make sure to pull Case upward and check the lock status.. As a confirmation method, press down the Case removal Button on the lower side of the Key cylinder. If the position of Button is in the state of about 6mm deeper than normal (Base half lock state), Case is not normally locked to Base.. To release this, push Case Removal Button strongly once again and remove Case from Base and install it again securely..
							When the button is pushed down, it is retracted about 6mm deeper than the normal lock state..

Note

* This item can not be cancelled, returned nor exchange after placing an order.

Caution

*Please note that there are cases wherein it has some scratches, dirt and etc. in the package of the outlet sale corresponding product.
*The outlet sale product are subjected to availability. It is impossible to purchase the product in case it is already out of stock.
*The product contents of the outlet sale is subjected to change without prior notice.

*There are cases that it contains other color in the photo.
*Daytona recommends a load of 3 kg or less for ease of operation.
* Not fully waterproof.
*The installation method depends on the car model.
*Please check the fitting before purchase.
*Make sure not to load over weight limit.
*Unpainted products are not polished.
*Due to helmet size, helmet may not fit.
*Product No./price/specification may change without notice.
*Choose similar type key with the one you are using at present. For Repair Key Set, refer to "GIVI Key Case Repair Parts".
*The picture is only for reference. It may differ from the actual product.
*Some types of helmets may not be able to be stored.
*Please note that the product specification may change due to manufacturer reasons.

[Manufacturer's 1-year warranty]
If a defect occurs during the warranty period, the product will be repaired or replaced free of charge, except in the case of "Non-warranty".
When requesting an inspection of a product, a receipt or other document that proves the date of sale is always required.
Please keep the receipt or any other document that proves the date of sale for one year.
If the date of sale (date of purchase) cannot be proven, the product warranty cannot be accepted. Please understand this in advance.
Please refer to the Daytona website (Product Warranty Policy:https://www.daytona.co.jp/warranty/index.php) for details.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.

[Closeout Product]Mono Lock Case B47 Series[special price]

Product Detail

Specification

Description

Note

Caution

Review

ALSO VIEWED PRODUCTS

[Closeout Product]Mono Lock Case B47 Series[special price]

Product Detail

Specification

Description

Note

Caution

Review

ALSO VIEWED PRODUCTS

Products Ready to Ship from Stock

Recommend for You

BEST SELLING

MOST VIEWED PRODUCTS

Recently Viewed Products

New Custom Article

Apply Coupon

Image Review

Review detail