• Home
  • Model
  • HONDA 0 - 50cc
  • MONKEY
  • Motorcycle Parts
  • Drive Parts
  • Sprocket Offset Spacers
  • GM-MOTO
  • GM-MOTO: KEPSPEED [for 5.5J] Front Sprocket Offset Kit for Horizontal Engines
【GM-MOTO】KEPSPEED [for 5.5J] Front Sprocket Offset Kit for Horizontal Engines - Webike Thailand
【GM-MOTO】KEPSPEED [for 5.5J] Front Sprocket Offset Kit for Horizontal Engines - Webike Thailand
【GM-MOTO】KEPSPEED [for 5.5J] Front Sprocket Offset Kit for Horizontal Engines - Webike Thailand
【GM-MOTO】KEPSPEED [for 5.5J] Front Sprocket Offset Kit for Horizontal Engines - Webike Thailand
【GM-MOTO】KEPSPEED [for 5.5J] Front Sprocket Offset Kit for Horizontal Engines - Webike Thailand
【GM-MOTO】KEPSPEED [for 5.5J] Front Sprocket Offset Kit for Horizontal Engines - Webike Thailand
【GM-MOTO】KEPSPEED [for 5.5J] Front Sprocket Offset Kit for Horizontal Engines - Webike Thailand
/
【GM-MOTO】KEPSPEED [for 5.5J] Front Sprocket Offset Kit for Horizontal Engines - Webike Thailand
【GM-MOTO】KEPSPEED [for 5.5J] Front Sprocket Offset Kit for Horizontal Engines - Webike Thailand
【GM-MOTO】KEPSPEED [for 5.5J] Front Sprocket Offset Kit for Horizontal Engines - Webike Thailand
【GM-MOTO】KEPSPEED [for 5.5J] Front Sprocket Offset Kit for Horizontal Engines - Webike Thailand
【GM-MOTO】KEPSPEED [for 5.5J] Front Sprocket Offset Kit for Horizontal Engines - Webike Thailand
【GM-MOTO】KEPSPEED [for 5.5J] Front Sprocket Offset Kit for Horizontal Engines - Webike Thailand
【GM-MOTO】KEPSPEED [for 5.5J] Front Sprocket Offset Kit for Horizontal Engines - Webike Thailand

KEPSPEED [for 5.5J] Front Sprocket Offset Kit for Horizontal Engines

  • Product number: mky-00193
    • IN STOCK
    • Out stock

฿5,383

Webike Points: +54 Points

Delivery information

  • Please wait...
to ThaiLand
CHANGE
Select address:
ThaiLand
    Shipping Fee ฿100

    Quantity

    100% Original 7 Days Warranty Free Cashback Net Price

    Product Detail

    Specification

    Country of origin :China
    Manufacturer: KEPSPEED

    Description

    Just fit KEPSPEED wide swingarm!!!
    This system allows the front sprocket to be offset significantly for wide swingarms.
    Offset values are 26.5mm and 18.5mm to fit KEPSPEED wide swingarms.
    However, an arbitrary offset value can be set if you have the spacer processing technology.
    In addition, the sprocket is 420 for the horizontal engine, so you can use your existing sprocket or many sprockets to realize your favorite gear ratio setting.

    Caution

    [Notes on purchase]
    *All GM-MOTO products are custom parts.Since these products are set up in response to the requests of heavy users, there may be parts of the product that change or decrease from the original driving performance.Please use as dress-up parts for show model machines.Therefore, it is not suitable for driving on public roads or tracks.In some cases, it may not be possible to mount the unit on a motorcycle, or adjustments and modifications may be required in various areas.
    *It is difficult to install it on the fuel injection vehicle (FI) MONKEY because the shape of the generator cover is different.A lot of work is required.

    [About the installation]
    *Because the drive sprocket of this product moves outward greatly, it is necessary to cut off a part of the generator cover of the engine to be installed.
    *It is difficult to install it on the fuel injection vehicle (FI) MONKEY because the shape of the generator cover is different.A lot of work is required.
    *The standard offset values are 26.5m and 18.5mm.To set other offset values, the shaft spacer must be modified.
    *KEPSPEED does not offer any machining to set an offset other than the standard offset value.
    *On some engines made in China, the protector can only be fixed in three places except for the lower rear part.In such a case, the protector plate can be fixed in three places, but please do not modify the protector plate.
    ※ Instructions for assembly (for complete kits) are included.Please refer to the instruction manual and assemble carefully.However, common sense techniques for maintenance work are not described in the manual.
    *Please make sure that the person with experience in motorcycle maintenance performs the assembly work.
    *Even if the rear suspension is at full bottom, make sure to check for any abnormal contact points before riding.
    ※ There may be some minor specification changes for each product.There may be some points that differ slightly from the introduction image.
    *Please have assembly work done in a specialist shop regarding motorcycle maintenance.
    ※ After the start of riding, pay attention to the occurrence of so-called initial loosening and perform frequent inspections to prevent unexpected problems.


    ※ Some minor scratches and scuffs may occur due to transportation issues.

    ※ GM-MOTO does not accept returns for any reason after the product has been installed.
    *In addition, problems after the start of riding are often caused by riding conditions, maintenance conditions, or a mismatch with the condition of the vehicle, and are difficult to distinguish from the causes of individual products. Therefore, all will be disclaimed.

    *The bearing is part number 6001ZZ (sealed on both sides), but there are no replacement parts available.
    *There may be changes in product specifications due to the manufacturer's reasons.
    *Because it is made overseas, the molding, welding, painting, etc. may be insufficient.There may be some minor scratches and scuffs due to transportation problems.

    Applicable Models

    HONDA
    MONKEY 5.5J compatible

    Model Page Links

    Review

    0.0

    / 5

    (0 Review)
    Write a review

    ALSO VIEWED PRODUCTS

    Products Ready to Ship from Stock

    Recommend for You

    BEST SELLING

    MOST VIEWED PRODUCTS

    Recently Viewed Products

    New Custom Article

    See all