Specification

[Quantity] 1pc
[Size]
・Screw Diameter:10mm
・Reach:26.5mm
・Plug wrench size:14mm
Shape]Terminal separation type
NGK compatible]LMAR8A-9,LMAR8A-9S,LMAR8G,LMAR9G,LMAR8J-9E,LMAR8D-J,LMAR9D-J,SILMAR8A9S,SILMAR9A9S,SILMAR9B9,SILMAR9E9,LMAR8AI-8,LMAR9AI-8, LMAR9AI-8, LMAR9AI-10, LMAR8BI-9, etc.

Description

With resistance (RegisterType)
RiskZC/ZSPlug has excellent ignition performance with MultiSpark at multiple points..
This allows the conventional StandardPlug, Iridium plugsetc. It has a large effect on reducing the rate of fire in the entire area of existing plug in the.
Acceleration, vibration reduction, flat torque characteristics, etc., you will feel the difference in effect immediately after changing a plug-in..
In addition, since the actual PlugGap is narrower than LG Type S, it can be made to function in the NORMAL ignition system, including the Point type..
In addition, the LG Type S can be used in a wide range of vehicle models because of its remarkable effect on the CDI ignition system that the LG Type S is not compatible with..
LG Type S has better performance in the high-revolution power band range, but the ZC/Z Type S has an advantage in terms of flat response and vibration reduction at low and medium speeds..
Compatibility of ZC/ZType S with 2-StokeEngine is difficult in practical terms due to the street youth's lack of cover in the low RPM range..
On the other hand, you can get very flat and powerful engine characteristics in the whole range of performance, so it is very effective TuningParts for circuit use..
It works well enough with NORMAL ignition, but with the Votani SP-2 or FXDC DYNA SUPER GLIDE CUSTOM2000 installed, it will show more performance.. It is also the best match for V-UP16/MSA.
NGK's CSizeLong reachPlug..
Most of the current BMW motorcycles are this Size.
It is used in many of the current engines such as HondaCB1100,YamahaYZF-R1('09-),KawasakiNINJA2 Helmet50R.
The thermal value response is number 8 to 10..

Note

* This item can not be cancelled, returned nor exchange after placing an order.

* The image is only for reference. The image shown may differ from the actual product.

Caution

*This product is a racing part.Even if there are indications of compatible models or plug compatibility, be sure to check for interference with the piston and use at your own risk.
*We are not responsible for any damage to the engine caused by defects in the product.
*Ignition tuned bikes - available.
*Ignition system stock bikes - available in some cases
*Full transistor ignition bikes - available.
*CDI ignition bikes - available.
*4-stroke bikes - available.
*2-stroke bikes - track use only.
*Resistor type (with resistor).
*Plug wrench size is 14mm.
*The terminal is separable, so it is compatible with any plug cap shape.The terminal is only lightly screwed in at the time of shipment, so please check the tightness of the terminal when installing
*Please refer to the NGK plug list for other compatibility information.Compatible with mounting screw diameter 10mm and mounting screw length 26.5mm.
*The tightening torque is 0.9kg-cm.Be careful of breakage due to overtorque.
*There may be changes in product specifications due to the manufacturer's reasons.

* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.

Blisk ZC/ZS Plug [CR12ZS]

Product Detail

Specification

Description

Note

Caution

Review

ALSO VIEWED PRODUCTS

Blisk ZC/ZS Plug [CR12ZS]

Product Detail

Specification

Description

Note

Caution

Review

ALSO VIEWED PRODUCTS

Products Ready to Ship from Stock

Recommend for You

BEST SELLING

MOST VIEWED PRODUCTS

Recently Viewed Products

New Custom Article

Apply Coupon

Image Review

Review detail