control number:24844705 FICON TYPE-X (Injection controller)
Description
Couplet-on mounting of injection controller to OEM ECU. You can easily select, change, and modify the built-in maps already set by PC or Smartphone.. SP Mukawa's original functions can be widely used from beginners to professionals..
[Couplet-on to OEM ECU] The Coupler that is compatible with the OEM ECU is used for the Controller Wiring, so there is no need to modify the wiring at all and it can be easily installed to the OEM ECU with the Couplet-on..
[Pre-setMap] EngineSpec. You can choose from EASYMODE 13Pattern and EXPERTMODE 9Pattern.. You can easily select, change and modify the settings using your PC or Smartphone..
[IdlingArea adjustment] FI ControllerTYPE-X uses NORMALECU's starting program for IdlingArea(Engine speed less than 2000rpm, Axel opening less than 10% up to 4000rpm). In this area, the injection volume is increased or decreased in relation to the NORMAL injection volume as necessary..
[Fuel injection time adjustment] It is possible to adjust every 5% of Axel opening and every 250rpm of Engine speed, so it can be used from STD Engine Displacement to Bore up vehicle..
[Ignition time adjustment] In the case of EASYMODE, it is possible to input the advance angle and the delay angle to NORMAL ignition timing.. In case of EXPERTMODE, the entered value (Crank angle before top dead center) becomes ignition timing.. In addition, EXPERTMODE can adjust "Engine temperature ignition timing correction function" which corrects the effect on the ignition timing by changing the vaporization time and combustion time when the engine temperature becomes too high..
[Inactive injection time correction] There is a little lag before the voltage is applied to the Injector and the fuel is injected.. This is called the reactive injection time.. Therefore, when the voltage supplied changes due to the state of the battery or the drop in the power generation function, the lag between the time the injection command is issued to the injector and the actual injection changes, and the amount of fuel injection also changes.. To prevent this from happening, it is possible to apply a correction to make the conditions constant.
[Engine temperature compensation] When the engine temperature is lower than the optimum temperature according to the input value from the PGM-FI oil temperature sensor, more fuel is injected than the value of injection MAP, the engine is warmed up quickly, and when the engine temperature is higher than the optimum temperature, more fuel is injected than at low temperature to lower the combustion temperature, etc.. It is possible to compensate for.
[Intake air temperature compensation setting] The density of air changes with temperature, so the change in air/fuel ratio is compensated for by the intake temperature..
[Vaporization time setting (injection timing setting)] Set the vaporization time for the fuel injected from the Injector to burn efficiently..
[dwell time setting] In the case of Transistor ignition, the energized dwell time is set for Coil before ignition.. This energization time is called dwell time..
[Digital Accelerated Pump] This product takes in the TPS signal and monitors the speed of the Axel opening.. When the Axel is opened quickly, the Rider judges that quick acceleration is required and performs acceleration injection asynchronously in addition to the incremental injection set at the moment the Axel is opened.. You can set the same function as "Acceleration Pump" of Racing cab..
[Real search function] Can be connected to PC or Smartphone with the engine running. The information of the running engine is reflected on the screen of PC or Smartphone in real time.. The reading of the RPM/Throttle opening degree is reflected in the mass of the fuel injection MapGraph, and the adjustment part becomes clear by shining the part, and it is very convenient at the time of setting..
[Real timeMonitor with Engine temperature display] Real timeMonitor function is available in dedicated Soft for PC or Smartphone. In addition to the Tachometer screen and Throttle opening degree graph screen, which are very useful for setting, Engine temperature and Injector fuel injection rate are also displayed digitally..
[Rev limit function] You can set the upper limit of the engine speed.. This function is independent of the Limiter cut, so you can set it at a lower rotation.. This can be used to prevent revving of the tuning engine, or when you don't want to increase the engine speed..
[Pit laneLimiter function] Pit lane speed regulation etc. of Circuit separately from the above-mentioned Rev limit function.. If you don't want to increase the engine rotation, you can connect a switch to the white wire in the spiral tube of the body and ground the body to activate the limiter only when the switch is on.. *Requires a separate Switch..
[Real timeMAPChange function] MAP1/MAP2 and two sets of MAP can be written inside FI ControllerTYPE-X.. It is assumed to be operated by switching between RACINGMODE, TOURINGMODE, and fuel-efficient driving MODE.. *Requires a separate Switch..
[Tachometer output service line] 1 Pulse5 Bolt is output to the purple line in the Spiral Tube of the Body.. SP Mukawa does not have a kit setting of Tachometer for GROM, MSX125 and MSX125SF.. We offer a wide range of Universal Tachometer. If you want to install SP Takekawa Universal Tachometer, you need to install Mounting Bracket, modify Harness, and connect Meter power supply..
Universal Tachometer by SP Mukawa X-Air LCD Speed&Tachometer(05-05-0027) Medium DN Tachometer(05-05-3210) Φ48 Small DN Tachometer(Orange)(05-05-0016) Φ48 Small DN Tachometer(White)(05-05-0035) MediumLCDSpeed&Tachometer(05-05-0028) Blue Led Tachometer(05-05-0004) Black&Green LightTachometer(05-05-0014)
Note
* This item can not be cancelled, returned nor exchange after placing an order.
Caution
*Please note that there are cases wherein it has some scratches, dirt and etc. in the package of the outlet sale corresponding product. *The outlet sale product are subjected to availability. It is impossible to purchase the product in case it is already out of stock. *The product contents of the outlet sale is subjected to change without prior notice.
*It requires to create a new map when using an engine spec that does not correspond to the preset map. *When using FI-Con TYPE-X, you will need a personal computer or smartphone that meets the requirements. *There is no tachometer kit setting for GROM/MSX125/MSX125SF at SP TAKEGAWA. *The mounting bracket is required and the harness is processed, and it requires to connect the meter power supply. *It is impossible to mount the SP TAKEGAWA universal tachometer (It will not work properly) Super Multi DN Meter (05-05-0811) Large LCD α Speed & Tachometer(09-01-0057) Medium LCD α Tachometer & Thermometer(09-05-0144) *When using FI-Con TYPE-X, you will need a personal computer or smartphone that conforms to the following condition. It cannot be used if the following conditions are not available. In addition, it requires to be connected to the Internet because it is necessary to download software and applications.Please note that it will be charged in the case of an application.
•FI Con TYPE-X Usage Environment For Windows PC SP Takegawa company dedicated software (free) must be connected to the internet for installation. It requires to connect in the internet to mount SP TAKEGAWA exclusive soft (free). Bluetooth is built in the personal computer, or an external Bluetooth adapter is required separately. You can only connect to the Windows standard Microsoft Bluetooth driver.
For Smartphone Andoroid Target:Andoroid, Andoroid Device Bluetooth Built-in Version 4.2.2 or later It requires Google play to install SP TAKEGAWA application (charge). After installing the free app for EASY mode or the app for EXPERT Mode, you need to purchase a paid model data within the app.
For Smartphone iOS Target:iPhone4s to iPad 3G to more than iOS9 You need to connect to the AppStore to install the SP TAKEGAWA exclusive App (paid)and purchase the model data. After installing the free app for EASY mode or the app for EXPERT Mode, you need to purchase a paid model data within the app. *Please note that the product specification may change due to manufacturer reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change. Please be forewarned. * Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
![【SP Takegawa】[Closeout Product]FI Controller TYPE-X(Injection controller)[special price] - Webike Thailand](https://img.webike-cdn.net/500x500/catalogue/images/51388/05-04-0103_01.jpg "【SP Takegawa】[Closeout Product]FI Controller TYPE-X(Injection controller)[special price] - Webike Thailand")
![【SP Takegawa】[Closeout Product]FI Controller TYPE-X(Injection controller)[special price] - Webike Thailand](https://img.webike-cdn.net/s52/catalogue/images/51388/05-04-0103_01.jpg "【SP Takegawa】[Closeout Product]FI Controller TYPE-X(Injection controller)[special price] - Webike Thailand")
![【SP Takegawa】[Closeout Product]FI Controller TYPE-X(Injection controller)[special price] - Webike Thailand](https://img.webike-cdn.net/catalogue/images/51388/05-04-0103_01.jpg "【SP Takegawa】[Closeout Product]FI Controller TYPE-X(Injection controller)[special price] - Webike Thailand")
![【SP Takegawa】[Closeout Product]FI Controller TYPE-X(Injection controller)[special price] - Webike Thailand](https://img.webike-cdn.net/catalogue/images/51388/05-04-0103_01_TS.jpg "【SP Takegawa】[Closeout Product]FI Controller TYPE-X(Injection controller)[special price] - Webike Thailand")