【DEGNER】[Closeout Product]SB-107 with Bracket Leather Saddle Bag (for Left)[special price] - Webike Thailand

[Closeout Product]SB-107 with Bracket Leather Saddle Bag (for Left)[special price]

Product number: SB-107
- NEW
- IN STOCK
- Out stock

DEGNER
|
0.0
(0 Review)

฿21,348

Webike Points: +213 Points

Delivery information

Please wait...

to ThaiLand

CHANGE

Select address:

ThaiLand

Shipping Fee ฿100

Quantity

100% Original 7 Days Warranty Free Cashback Net Price

Applicable Models

See all

REBEL250 17- *Excluding custom vehicles REBEL250 S Edition 17- *Excluding custom vehicles REBEL500 17- *Excluding custom vehicles

Product Detail

Specification

control number:25874724
Collar:VintageBrown
Material:Oil leather
Size:31 x 40 x 14 (cm)*Excluding bracket
Capacity:12L
Included Parts::Rain CoverX1,Bracket SetX1

List of Bracket Sets
[1]REBELExclusive Bracket 1
[2]M8-16mm Bolt 3
[3]M8 Washer 3
[4]M8 Lock nut 3
[5]M8-25mm Bolt 2
[6]M8 Washer(Large) 2
[7]Exclusive Collar 2
[8]R Pin Φ2mm 1
[9] Double round can 1
[10]Stainless Steel Wire 1
*Included Parts outside [5][6][7:is attached to Bag

Description

REBEL250/500Exclusive Design
Saddle bag that does not leave the bracket on the car body when the bag is removed.
Only the Collar to hook the Bag is attached to the vehicle body..

[Installation Instructions]
For installing a bag with REBEL250/500Exclusive Bracket
[Compatible models] REBEL250,REBEL250 S Edition,REBEL500 after 2017 *Excluding Custom vehicles.

[Mounting]
[Step1]Installation of Bracket
1. Remove the Bolt in front of the Rear Fender and install the supplied Bolt, Washer (Large) and Exclusive Collar..
2.Remove the bolt behind the Rear Fender as in step 1, and install the Exclusive Collar and Bolt that come with the Rear Fender..
3. After attaching the Exclusive Collar to the two Bolts on the Rear Fender, you are ready to go..

[Step2]Bag installation
1. Insert the cutout of the bracket on the back of the bag into the gap of the Exclusive Collar installed in Step 1..
2. Insert the pin at the bottom of the bracket on the back of the bag into the hole under the Pillion Footpeg..
3. Insert the RPin into the inserted Pin hole.. Installation is now complete..

[Care Instructions]
■Daily care
Brush off the dirt in the pores of the leather's surface..
Brushing removes dirt and keeps the area clean..

■Regular care
Brush off the dirt in the pores of the leather's surface..
Use Leather Soap to remove dirt..
*Let's take Leather Soap to CROSS and Brush and stretch it!
*Directly applying the stain will cause it to stain..
Once the dirt is removed, use WaterproofSpray, which is specially designed for leather, to protect the leather..
Apply a thin coat of LeatherOil..
*Excessive application of LeatherOil will weaken the leather, and Moldetc.. Do not apply too thinly, as it may cause.
Finally, polish with a soft bristle brush or maintenance gloves..

■When it rains and you get wet.
Rain etc.. After getting wet in the water, you can use a clean Toweletc. Remove water with.
After drying in an airy shade, moisturize with LeatherOil..
Excessive application of LeatherOil will weaken the leather, and Moldetc.. This can cause the.
Apply thinly to avoid over-application..

[Leather TroubleQ&A]
I left the leather in the ground and found a white powder on the surface of the leather... What is this?
It's a fatty substance called "spew.".
Leather undergoes a process called "oiling" before it is transformed from skin to leather..
Some types of leather are oiled up in the finishing process.
These oils have dried and crystallized on the surface of the leather..
If maintenance is performed regularly, they will not appear, but they are more likely to appear if a leather jacket is left in the closet..
It's just grease, so it's harmless. Wipe it off and you're done, but since it means the leather surface is dry, you should maintain it with oil after wiping it off..

Mold has grown! What should I do?
Can be handled by the average household.
First, wipe off the "visible mold" with a stiff towel..
Invisible Mold" is disinfected by misting with Ethanol diluted with water.
After that, dry in the sun to disinfect with ultraviolet rays and dry the moisture, and then OilUp..
Mold is best prevented from occurring..
Store your leather goods in a well-ventilated, dry place before Mold grows on them..
Then Mold fungus is Mink oiletc. I like animal fats in large, so be careful not to overdo OilUp..

■The surface color of the leather is fading.. What should I do?
We can cheat..
The color of leather is "dyed" or "colored" during the transformation from "hide to leather"..
So it will always fade..
First of all, the response will vary depending on whether the fading is due to "ageing from use" or from storage conditions (e.g., the shoulder was exposed to sunlight in a window, etc.)..
If it is the former, it is because the leather changes over time, so let's OilUp the whole surface!.
OilUp makes it look darker..
In the latter case, the color has faded due to partial burn, so the only solution is to "paint over" the color..

Stain on the leather! How to remove it?
It is pleasant to open the accelerator.
It is often asked for advice on so-called "gnome leather", but there is no way to remove the stain..
The entire surface can be oiled up to make it less noticeable, or the color can be repainted from the surface..
As with human skin, it is most effective to take measures before it becomes stain..
After purchasing a new product, dry it in the sun and then oil it up..
Just doing this before you start using it will definitely make it less likely to Stain!.
Some maintenance products such as "LeatherMASTER" have "Apply before use! CareOil" is also available for some maintenance products such as "LeatherMASTER"..

Note

* This item can not be cancelled, returned nor exchange after placing an order.

Caution

*Please note that there are cases wherein it has some scratches, dirt and etc. in the package of the outlet sale corresponding product.
*The outlet sale product are subjected to availability. It is impossible to purchase the product in case it is already out of stock.
*The product contents of the outlet sale is subjected to change without prior notice.

*Cannot be used in combination with optional parts such as grab bars, side grips, carriers, fenderless kits, etc.
*This product is designed to prevent interference between the saddlebags and the vehicle body. Please be careful not to scratch the vehicle during installation.
*This product uses the factory rear step stay and the factory rear fender. This product cannot be installed on vehicles with customized parts. This product cannot be used with optional parts such as side grips and sissy bar.
*Small parts such as washers may differ from those shown in the photos, but there is no problem in use.
*Make sure that the engine and muffler are cool before installation. It is very dangerous to work on them immediately after driving as it may cause burns.
*Always turn the main key OFF during installation and keep the vehicle stable on a level surface during installation. It is very dangerous as the vehicle may fall over.
*Please be sure to remove and install genuine parts, bolts, nuts, etc. in accordance with the service manual issued by the manufacturer.
*If an abnormality occurs while driving, stop the vehicle in a safe place immediately and inspect the abnormal area. If any abnormality is found, immediately stop driving and discontinue use of the product.
*For safe operation, be sure to perform inspections and maintenance such as periodic retightening of bolts. In particular, be sure to check that the anti-slamming pin and R-pin are installed properly every time you use the product.
*Please keep the instruction manual in a safe place and hand it over with the product or the vehicle in which the product is installed when you transfer the product or the vehicle in which the product is installed.
*Please follow the installation instructions on the tag for handling the on-board bag and check the safety of the installation before each trip. Degner will not be responsible for any damage, malfunction or accident caused by unintended installation other than those described in this manual.
*This product does not come with a warranty card. Degner is not responsible for any defects, disadvantages, accidents, or damages that may occur to the product itself, the vehicle in which it is installed, the user, or any third party. The user is solely responsible for the use of this product.
*Please note that there may be individual product differences due to materials and manufacturing methods. Please understand.
*This product is intended for use at the legal speed limit. Please drive safely and obey all laws and regulations.
*Do not use the product if it is defective. If you do not follow the above instructions, we will not be responsible for any problems that may occur.
*Although we have given due consideration to the durability of the materials, sewing, and specifications of this product, rough handling or excessively heavy luggage (5 kg or more) may cause damage to the product. Please be careful not to damage the body of the car or interfere with driving.
*Please note that we are not responsible for any damage or accident to the product or the car body caused by improper use.
*In no event will we be liable for any damage to the bike or color migration caused by the use of this product.
*This product is made of natural leather. Even if they are the same product, there are individual differences in the way the leather wrinkles and cracks, as well as scratches and shades of color that are unique to the leather.
*There may be slight differences in the texture of the leather depending on the time of production. Please understand this in advance.
*Oil leather contains more oil than normal leather. The color of the leather may lighten with use and should be regularly replenished with leather oil.
*Deterioration and wear of the product due to aging and use are inevitable.
*It completely consider its durability but there is a possibility that it occur some damage if applying a excessive burden or inappropriate usage of the product.
*This product and the rain cover are not completely waterproof due to their structure. Please put them in a waterproof bag before storing them in your bag.
*The color of the product image may differ from the actual product depending on your monitor's settings, lighting, and other factors.
*Please note that the product specification may change due to manufacturer reasons.
*It contains other color in the photo.
*There are cases that it contains other product in the photo.

* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.

Applicable Models

REBEL250 17- *Excluding custom vehicles REBEL250 S Edition 17- *Excluding custom vehicles REBEL500 17- *Excluding custom vehicles

Model Page Links

Review

0.0

/ 5

(0 Review)

Write a review

[Closeout Product]SB-107 with Bracket Leather Saddle Bag (for Left)[special price]

Applicable Models

Product Detail

Specification

Description

Note

Caution

Applicable Models

Model Page Links

Review

ALSO VIEWED PRODUCTS

Products Ready to Ship from Stock

Recommend for You

BEST SELLING

MOST VIEWED PRODUCTS

Recently Viewed Products

New Custom Article

Apply Coupon

Image Review

Review detail