Please login to check coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See all
REBEL250 17- *Excluding custom vehicles
REBEL250 S Edition 17- *Excluding custom vehicles
REBEL500 17- *Excluding custom vehicles
Show more
Product Detail
Specification
Material: Cowhide (oil leather)Size: 31 (L) x 40 (W) x 14 (W) cm (excluding brackets)
Capacity: 12L
Components: Rain cover x 1, Bracket set x 1
■List of Bracket Sets
[1] Revel special bracket 1
[2] M8-16mm bolt 3
[3] M8 Washer 3
[4] M8 lock nut 3
[5] M8-25mm bolt 2
[6] M8 Washer (large) 2
[7] Exclusive collar 2
[8] R pin Φ2mm 1
[9] Double round ring 1
[10] Stainless steel wire 1
*[5] [6] [7] Accessories outside the bag are attached to the bag
Description
Designed exclusively for Rebel 250/500
Saddlebags that do not leave brackets on the bike body when the bag is removed.
Only the collar to which the bag is attached is attached to the bike body.
[Installation Instructions]
■Installation of bag with bracket for Rebel 250/500
[Compatible models] 2017 and newer: Rebel 250, Rebel 250 S Edition, Rebel 500 *Excluding custom bikes
[installation instructions]
[Step 1] Installation of bracket
1. Remove the bolt in front of the rear fender and install the supplied bolt, washer (large) and special collar.
2. Remove the bolt at the rear of the rear fender as in step 1, and install the supplied special collar and bolt.
3. Install the special collars on the two bolts on the rear fender and you are ready to go.
[Step 2] Attach the bag
1. Insert the cutout on the back bracket of the bag into the gap between the special collar installed in Step 1.
2. Insert the pin at the bottom of the back bracket of the bag into the hole under the pillion step.
3. Insert the R pin into the hole of the inserted pin.Installation is now complete.
[Care instructions]
■Daily care
Brush off dirt from the pores on the surface of the leather.
Brushing removes dirt and keeps the area clean.
■Regular care
Brush off dirt from the pores on the surface of the leather.
Use leather soap to remove dirt.
*Use a cloth or brush to spread the leather soap
*Direct contact may cause stains.
Once the dirt is removed, we recommend the use of a waterproof spray specially designed for leather to protect it.
Apply a thin coat of leather oil.
*Applying too much leather oil can weaken the leather and make it more susceptible to issues like mold. Therefore, it's important to apply it sparingly, avoiding excessive use.
Finally, polish with a soft bristle brush or maintenance glove.
■When it rains and gets wet
After getting wet in the rain, dry with a clean towel.
Dry in a well-ventilated shady area and moisturize with leather oil.
Excessive application of leather oil can weaken the leather and cause mildew.
Apply thinly to avoid over-application.
[Leather Troubles Q & A]
■I left the leather unattended and there is a white powder on the surface, what is it?
It is a fatty substance called spew.
Leather undergoes a process called oiling during its transformation from hide to leather.
Some types of leather are oiled up in the finishing process.
These oils have dried and crystallized on the surface of the leather.
If you maintain your leather jacket regularly, it will not appear, but if you leave it in the closet, it is more likely to appear.
It is harmless because it is just grease, and you can wipe it off, but it means that the surface of the leather is dry, so you should maintain it with oil after wiping it off.
■ Mold!What should I do!???
It can be handled easily.
First, wipe off any visible mold with a wrung out towel.
Disinfect invisible mold by misting with ethanol diluted with water.
After that, dry in the sun to disinfect with ultraviolet rays and dry the moisture, and then oil up.
The best way to solve mold problems is to prevent it from occurring.
Store your leather goods in a well-ventilated and dry place.
Also, beware of over-oiling, as fungus loves animal fats such as mink oil.
■The surface color of the leather is fading.What should I do?
You can cheat.
The color of leather is dyed or colored during the transformation from hide to leather.
Therefore, it will always fade.
First of all, the response will vary depending on whether the fading is due to ageing due to use or due to storage conditions (e.g., the shoulder was exposed to sunlight near a window).
If it is the former, it is because the leather changes with age, so you should oil up the entire surface.
Oiling up will darken the appearance.
If the latter is the case, the color has faded due to partial burning, and the only solution is to re-paint the color.
■ Stains on the leather!How do I clean it?
There is no way to remove the stain, although we often get asked for advice regarding so-called 'tanned leather' and the like.
It is possible to oil up the whole area to make it less noticeable or to re-paint from the surface.
As with human skin, it is most effective to take measures before spots appear.
After purchasing a new product, dry it in the sun and then oil it up.
Just do this before you start using it and you will be much less likely to get stains.
Some maintenance products, such as Leather Master, have a message that says, 'Apply before use!'Care oil is also recommended.
Saddlebags that do not leave brackets on the bike body when the bag is removed.
Only the collar to which the bag is attached is attached to the bike body.
[Installation Instructions]
■Installation of bag with bracket for Rebel 250/500
[Compatible models] 2017 and newer: Rebel 250, Rebel 250 S Edition, Rebel 500 *Excluding custom bikes
[installation instructions]
[Step 1] Installation of bracket
1. Remove the bolt in front of the rear fender and install the supplied bolt, washer (large) and special collar.
2. Remove the bolt at the rear of the rear fender as in step 1, and install the supplied special collar and bolt.
3. Install the special collars on the two bolts on the rear fender and you are ready to go.
[Step 2] Attach the bag
1. Insert the cutout on the back bracket of the bag into the gap between the special collar installed in Step 1.
2. Insert the pin at the bottom of the back bracket of the bag into the hole under the pillion step.
3. Insert the R pin into the hole of the inserted pin.Installation is now complete.
[Care instructions]
■Daily care
Brush off dirt from the pores on the surface of the leather.
Brushing removes dirt and keeps the area clean.
■Regular care
Brush off dirt from the pores on the surface of the leather.
Use leather soap to remove dirt.
*Use a cloth or brush to spread the leather soap
*Direct contact may cause stains.
Once the dirt is removed, we recommend the use of a waterproof spray specially designed for leather to protect it.
Apply a thin coat of leather oil.
*Applying too much leather oil can weaken the leather and make it more susceptible to issues like mold. Therefore, it's important to apply it sparingly, avoiding excessive use.
Finally, polish with a soft bristle brush or maintenance glove.
■When it rains and gets wet
After getting wet in the rain, dry with a clean towel.
Dry in a well-ventilated shady area and moisturize with leather oil.
Excessive application of leather oil can weaken the leather and cause mildew.
Apply thinly to avoid over-application.
[Leather Troubles Q & A]
■I left the leather unattended and there is a white powder on the surface, what is it?
It is a fatty substance called spew.
Leather undergoes a process called oiling during its transformation from hide to leather.
Some types of leather are oiled up in the finishing process.
These oils have dried and crystallized on the surface of the leather.
If you maintain your leather jacket regularly, it will not appear, but if you leave it in the closet, it is more likely to appear.
It is harmless because it is just grease, and you can wipe it off, but it means that the surface of the leather is dry, so you should maintain it with oil after wiping it off.
■ Mold!What should I do!???
It can be handled easily.
First, wipe off any visible mold with a wrung out towel.
Disinfect invisible mold by misting with ethanol diluted with water.
After that, dry in the sun to disinfect with ultraviolet rays and dry the moisture, and then oil up.
The best way to solve mold problems is to prevent it from occurring.
Store your leather goods in a well-ventilated and dry place.
Also, beware of over-oiling, as fungus loves animal fats such as mink oil.
■The surface color of the leather is fading.What should I do?
You can cheat.
The color of leather is dyed or colored during the transformation from hide to leather.
Therefore, it will always fade.
First of all, the response will vary depending on whether the fading is due to ageing due to use or due to storage conditions (e.g., the shoulder was exposed to sunlight near a window).
If it is the former, it is because the leather changes with age, so you should oil up the entire surface.
Oiling up will darken the appearance.
If the latter is the case, the color has faded due to partial burning, and the only solution is to re-paint the color.
■ Stains on the leather!How do I clean it?
There is no way to remove the stain, although we often get asked for advice regarding so-called 'tanned leather' and the like.
It is possible to oil up the whole area to make it less noticeable or to re-paint from the surface.
As with human skin, it is most effective to take measures before spots appear.
After purchasing a new product, dry it in the sun and then oil it up.
Just do this before you start using it and you will be much less likely to get stains.
Some maintenance products, such as Leather Master, have a message that says, 'Apply before use!'Care oil is also recommended.
Caution
*Cannot be used in combination with optional parts such as grab bars, side grips, carriers, fender eliminator kits.*This product is designed to prevent interference between the saddlebags and the bike body.Please be careful not to scratch the bike during installation.
*This product can be installed using the stock rear step bracket and the stock rear fender.Installation cannot be performed on bikes that have been customized in the relevant areas.This product cannot be used with optional parts such as side grips and sissy bar.
*Small parts such as washers may differ from those shown in the photos, but there is no problem in use.
*Make sure the engine and exhaust are cold before installation.It is very dangerous to work on the product immediately after riding, as it may cause burns.
*Always turn the main key OFF during installation and keep the bike stable on a level surface during installation.It is very dangerous, for example, the body of the bike may fall over.
*Please be sure to remove and install stock parts, bolts, nuts in accordance with the service manual issued by the manufacturer.
*If any abnormality occurs during riding, stop the bike at a safe place immediately and inspect the abnormal parts.If any abnormality is found, stop riding or use of the product immediately.
*For safe riding, be sure to perform inspections and maintenance such as periodic retightening of bolts.In particular, be sure to check that the anti-slap pins and R-pins are attached every time.
*Please keep the instruction manual in a safe place and hand it over with the product or the bike in which the product is installed when you transfer the product or the bike in which the product is installed.
*For handling the on-board bag, please follow the installation instructions on the tag and check the installation and safety by yourself before each ride.
Degner is not responsible for any defects, disadvantages or accidental damages to the product itself, the bike in which it is installed, the user or any third party that may result from its use.All use is at the user's own risk.
*Individual product differences may occur due to materials, manufacturing methods.
*This product is intended for use at legal speeds.Please obey all laws and regulations and ride safely.
*Do not use the product if it is defective.If you do not follow the above, we will not be responsible for any problems.
*Although we have taken great care to ensure the durability of the materials, sewing, and specifications of this product, rough handling or excessively heavy loads (5kg or more) may cause damage to the product.Please be careful not to damage the bike body or interfere with riding.
*We are not responsible for any damage or accident to the product or the bike body caused by improper use.
*In no event will we be liable for any damage to the bike or color migration caused by the use of this product.
*This product is made of natural leather.Even if they are the same product, there are individual differences in the wrinkles and cracks, as well as scratches and shades of color that are unique to each piece of leather.
*There may be slight differences in the texture of the leather depending on the time of production.
*Oiled leather contains more oil than normal leather.The color may fade with use, so please supplement the oil with leather oil periodically.
*Deterioration and wear of the product due to aging and use are inevitable.
*Although we have taken durability into consideration, there is a possibility that the product will be damaged if it is overloaded or used inappropriately.
*This product and the rain cover are not completely waterproof due to their construction.Please put your belongings in a waterproof bag before storing it in the bag.
*The color of the product image may differ from the actual product depending on your monitor's settings, lighting, and other factors.
*There may be changes in product specifications due to the manufacturer's reasons.
*The image may contain other colors.
*The image may contain other products.
Applicable Models
REBEL250 17- *Excluding custom vehicles
REBEL250 S Edition 17- *Excluding custom vehicles
REBEL500 17- *Excluding custom vehicles
Show more
Model Page Links
Review
0.0
/ 5
(0 Review)
