Please login to check coupons
Product Detail
Specification
Center of mounting hole - length of center: Approx. 340mmSpring Outer Diameter: 65mm
Spring wire diameter: 8.1mm
Rod diameter: 12.3mm
Inner diameter of Upper Mounting Hole: 14mm
Inner diameter of lower mounting hole: 14mm
Thickness of the upper mounting: 18.3mm
Thickness of lower mounting: 20.0mm
Tank Diameter: 49mm
Description
●Based on the concept of providing a suspension that can be used with assurance, this is an original suspension that has been completed through many trials and errors from planning and development to commercialization.
●In order to achieve low cost, the parts that make up the suspension are manufactured at partner factories overseas, while the final assembly, nitrogen gas injection, product inspection before shipment, and other important tasks are handled by specialized staff at U-CP's factories in Japan.
●U-CP has increased the tank capacity, increased the spring wire diameter by 1mm, and increased the spring outer diameter by 5mm, so the ride will not be too soft and fluffy.
●The upper and lower rubber bushings are manufactured in Japan, so they are resistant to deterioration and can be used just like the stock.
●It will be lowered up to 25mm lower than the stock suspension.
●The semi-color order system allows you to choose from 45 different color variations.
If you wish to order, please specify the spring color and the upper and lower ring colors referring to the third picture.
●The spring preload can be full adjustable.
● Since the ride height is lower than the stock suspension, please set the preload harder when riding pillion.
●When lowered, the bike will stand upright.
Adjust the tilt of the side stand.
●The center stand can be used, but it is very heavy when lifting the bike because the tires do not touch the ground.
●Damping pressure cannot be adjusted.
●The preload adjustment wrench and hex wrench are included.
●In order to achieve low cost, the parts that make up the suspension are manufactured at partner factories overseas, while the final assembly, nitrogen gas injection, product inspection before shipment, and other important tasks are handled by specialized staff at U-CP's factories in Japan.
●U-CP has increased the tank capacity, increased the spring wire diameter by 1mm, and increased the spring outer diameter by 5mm, so the ride will not be too soft and fluffy.
●The upper and lower rubber bushings are manufactured in Japan, so they are resistant to deterioration and can be used just like the stock.
●It will be lowered up to 25mm lower than the stock suspension.
●The semi-color order system allows you to choose from 45 different color variations.
If you wish to order, please specify the spring color and the upper and lower ring colors referring to the third picture.
●The spring preload can be full adjustable.
● Since the ride height is lower than the stock suspension, please set the preload harder when riding pillion.
●When lowered, the bike will stand upright.
Adjust the tilt of the side stand.
●The center stand can be used, but it is very heavy when lifting the bike because the tires do not touch the ground.
●Damping pressure cannot be adjusted.
●The preload adjustment wrench and hex wrench are included.
Caution
*The image is for reference only.The size of the collar may vary depending on the model.*There may be some small scratches on the product during production or transportation.
*The image may contain other colors.
*There may be changes in product specifications due to the manufacturer's reasons.