.jpg "【GOODS】Pipe Work Front Fender - Webike Thailand")
.jpg "【GOODS】Pipe Work Front Fender - Webike Thailand")
.jpg "【GOODS】Pipe Work Front Fender - Webike Thailand")
.jpg "【GOODS】Pipe Work Front Fender - Webike Thailand")
.jpg "【GOODS】Pipe Work Front Fender - Webike Thailand")
.jpg "【GOODS】Pipe Work Front Fender - Webike Thailand")
.jpg "【GOODS】Pipe Work Front Fender - Webike Thailand")
.jpg "【GOODS】Pipe Work Front Fender - Webike Thailand")
Please login to check coupons
Product Detail
Specification
・Black paint finish[Size]
fender
Length: Approx. 410mm
Width: Approx. 104mm
Pipe diameter: Φ15.9mm
Stabilizer
Total height: Approx. 121mm
Overall width between forks: Approx. 135mm
Bolt pitch for front / rear: 62mm
Bolt hole Diameter: 9mm(M8)
Inner width: Approx. 128mm
[Material]
Fender: FRP
Bracket: steel
[Components]
Fender x 1
Bracket x 1 set
Pipework sway bar x 1
Description
[Never out of style![GOODS original front fender]
Bolt-on front fenders.
The mounting position can be raised or lowered, and tires with high height such as Firestone can be mounted.
It also has the effect of increasing the rigidity of the front by the bracket that also serves as a stabilizer.
[FIRESTONE and more!]
Until now, it was difficult to install fenders with high height tires, but our pipework fenders can be installed without any problem!Mounting the fender that could't be installed on up until now.
This is the solution!
[Designed not to distract from style!]
It is designed to be as simple as possible and to blend in with the body of the vehicle so that it can be installed on choppers and bobber styles without any discomfort.
As you can see from the installation images of each model, it fits perfectly with any style
[It also doubles as a stabilizer to increase front rigidity!]
This product will solve the problem of the front rigidity lost by the fender eliminator!GOODS is trying to make "full customization for riding" happen!
Bolt-on front fenders.
The mounting position can be raised or lowered, and tires with high height such as Firestone can be mounted.
It also has the effect of increasing the rigidity of the front by the bracket that also serves as a stabilizer.
[FIRESTONE and more!]
Until now, it was difficult to install fenders with high height tires, but our pipework fenders can be installed without any problem!Mounting the fender that could't be installed on up until now.
This is the solution!
[Designed not to distract from style!]
It is designed to be as simple as possible and to blend in with the body of the vehicle so that it can be installed on choppers and bobber styles without any discomfort.
As you can see from the installation images of each model, it fits perfectly with any style
[It also doubles as a stabilizer to increase front rigidity!]
This product will solve the problem of the front rigidity lost by the fender eliminator!GOODS is trying to make "full customization for riding" happen!
Caution
*Normal gravity trackers cannot be mounted because the sway bar is fixed lower than the big boy and the top of the sway bar interferes with the tire.*If the tire width exceeds 112mm, the stabilizer bolts must be installed after the tire is mounted.
*It is necessary to remove the front wheel when installing.
*FIRESTONE tires are confirmed to be available in 4.00 size.
*If the tire type or size is too large, it may not be able to be mounted.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
Big Boy
.jpg "【GOODS】Pipe Work Front Fender - Webike Thailand")
.jpg "【GOODS】Pipe Work Front Fender - Webike Thailand")
.jpg "【GOODS】Pipe Work Front Fender - Webike Thailand")
.jpg "【GOODS】Pipe Work Front Fender - Webike Thailand")
_TS.jpg "【GOODS】Pipe Work Front Fender - Webike Thailand")
_TS.jpg "【GOODS】Pipe Work Front Fender - Webike Thailand")
_TS.jpg "【GOODS】Pipe Work Front Fender - Webike Thailand")
_TS.jpg "【GOODS】Pipe Work Front Fender - Webike Thailand")