[aluminum die-cast clutch cover] Patented construction: Thermostat mounting section and oil line structure Oil can be taken out to the oil cooler. Optional thermostat unit with shape memory alloy spring can be installed.Prevents overcooling. Thermostat unit sold separately. The oil element is of the highly reliable cartridge paper type. The engine oil check window is made of durable glass. Clutch cable receiver with integrated cover.
[Standard Clutch (for SP Takegawa 4 / 5 / 6 speed cross transmission)] In the case of the standard clutch, the clutch body is installed on the stock crankshaft shaft, but the SP Takegawa special clutch adopts the secondary clutch installed on the transmission side main shaft. This will reduce the load on the crankshaft.Also, the crankshaft shaft can be lightened, and a light throttle response can be demonstrated. The primary driven gear is equipped with a damper to reduce shock when the clutch is connected. With 5 friction discs, it is suitable for high power engines for both street and race use. The lifter plate is made of die-cast aluminum for durability and strength.
[Super Sport Cross Transmission included] Supersport 5-speed crossover transmission for stress-free use of the power band. Even if you increase the power of the engine, the stock transmission will not be able to utilize the power band and bring out the potential of the engine. With this SS 5 speed cross transmission, you will be able to use the power band for street driving, cornering, and racing without any stress and maximize the potential of your custom engine.
First gear: 3.272 2-speed: 1.937 3-speed: 1.350 4-speed: 1.043
・Webike Thailand is an official distributor of SP Takegawa in Thailand. ・Products purchased from Webike Thailand are covered by the product warranty specified by SP Takegawa.
Caution
*Clutch lever will need to be purchased separately. *When installing on vehicles with Z50J-1300017-1805927, the B type kick starter spindle (part number:02-04-0011) is required. *When installing on a Z50J-1300017 -1600007 vehicle, the supplied clutch cable cannot be installed on the stock clutch holder (type welded to the handle pipe), so replace the handle pipe and use the SP TAKEGAWA clutch lever or Use SP Takegawa clutch lever or combination switch with clutch lever. *If you are using SP Takegawa oil cooler and the oil hose is connected to the clutch cover, you will need to change the banjo and hose length. *Crankcase gasket is included. *There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
