[Guideline color] White [Specification] ・With rev indicator ・White LED ・12500RPM display
Description
The angle of the pointer is fully controlled by digital signals and a small motor. It has a highly reliable structure with a high pointer holding force. Compared with the electromagnet system, the accuracy of this system is greatly improved.
[Details] This is a motor-driven pointer tachometer with excellent vibration resistance and accuracy. The RPM function is equipped with a rev indicator and a maximum RPM record. The black panel with white LED lighting provides excellent nighttime visibility. Stainless steel body.
■DN (Digital Needle) Tachometer with Cylinder Number Switch Function The firing signal detection of the Φ48 Small DN tachometer can now also read the pick-up pulse at the flywheel. However, only one signal (one projection) is supported per revolution of the flywheel. It is also possible to read the ignition pulse from either a conventional high tension code or the ignition coil. However, there is a case that the numerical value cannot be displayed accurately for the bike with a special ignition system and the bike that ignition is controlled by C.D.I. The number of fires can be set from 1 to 4 per 2 revolutions of the crankshaft. Does not work on point ignition bikes. The maximum display speed is 12500 rpm.
Note
・Webike Thailand is an official distributor of SP Takegawa in Thailand. ・Products purchased from Webike Thailand are covered by the product warranty specified by SP Takegawa.
Caution
*Please do not install any aftermarket H.I.D kit or any other company's LED headlights or fog lamps at the same time. *Some ballasts / inverters (voltage conversion devices) emit high voltage noise that can adversely affect digital circuits, causing product failure or malfunction. *Please do not install the headlight ON / OFF switch and the aftermarket ignition system at the same time. *Do not use in combination with ignition system products or power generation system products other than SP Takegawa products. *If you use racing plugs or change the plug caps or high tension cords to other than stock or SP Takegawa products, the operation may become unstable due to noise. *Make sure to use a resister type spark plug. *There may be changes in product specifications due to the manufacturer's reasons.
*Depending on the lot, the product may be delivered with the old price and label with the old JAN code before the price change.
