Please login to check coupons
Product Detail
Specification
■Body[Size] Outer diameter dimension: W36 x H70 x D19mm
[Specification]
・Rated voltage: DC12V
・Operating voltage range: DC7V-17V
・Current consumption: 0.9mA or less (in standby mode)
■Siren
[Size] Outer diameter dimension: W39.5 x H48 x D23.5mm
[Specification]
・Model: Piezoelectric type
・Output sound pressure level: 122±5dB / 12V / 10cm
・Frequency: 2-4KHz
■Indicator lamps
[Specification]
・Model: LED (Light Emitting Diode)
・Emission color: red
[Enclosed]
・Main Unit x 1
・Siren x 1
・LED Indicator Lamp x 1
・Electro Tap x 2
・Instruction manual
Description
Vehicle specific anti-theft alarm.All the parts you need for installation are ALL in ONE.
The length of the wiring has been adjusted for each model.
Includes instructions on where to install the main unit, siren and indicator.
■Shape Memory System
Adopts a digital 3G sensor that memorizes the current state of the bike in three dimensions: X-axis, Y-axis and Z-axis!
If the bike is moved even slightly, it will emit a warning and alarm sound.
Even after the alarm sound stops, the 3G sensor remembers and maintains the alarm status again!
Adoption of affixed type indicator!
Better sensor characteristics than before!
■No remote control required!
Set and unlock with just the key of your vehicle!
Simple operation by turning the key on and off.
You don't have to worry about carrying around the remote control or running out of batteries.
■High performance 3G sensor adopted!
The digital 3G sensor remembers the set state and reacts to suspicious movements.There are no false alarms!
The new version further reduces the false triggering caused by the vibration of the alarm set sound.
■Two-way warning / alarm system!
When the digital 3G sensor detects it, a warning tone will sound intermittently for 5 seconds.
In addition, if the digital 3G sensor continuously detects the alarm, it will generate a continuous alarm sound for up to 3 minutes.
■Re-memory function of digital memory sensor
After the continuous alarm sound is stopped, the digital 3G sensor remembers the current status and keeps the alarm standby status, so when the sensor detects again, the warning sound and continuous alarm sound will be generated.
■LED indicator lamp included
You can check the standby status with the attached LED indicator lamp. In addition, you can expect the effect of threatening and repelling by the flashing LED indicator lamp.
Conventional indicator lamps required drilling on the vehicle side, but the new version uses double-sided tape for easy installation.
■Remarkable power saving!
Current consumption in standby mode is only 0.9mA or less.
Power-saving type that is less than the self-discharge amount of the battery!
■No warning or alarm sound for one minute after setting!
The warning / alarm sound does not sound for one minute after setting the alarm, so it is convenient to avoid false alarms when you put the seat cover on after setting the alarm.
*However, the indicator light will respond.
■The compact design makes it easy to store in any location.
The compact design of the sensor body allows it to be stored in a small space.
*1 It may not be able to be installed on some models.
The reality of theft!
In 2013, more than 51,588 motorcycles were stolen annually.
This means that a vehicle is stolen every 10 minutes.
And about 90% of the damage has gone unresolved.
The stolen vehicles range from large motorcycles to mopeds.
Do you think that your bike is fine because it is a small moped?
Is it broken?Before people think so...
Diagnosis: The alarm is triggered immediately after setting the alarm standby
Confirmations:
The sensor of CS-550M is a special sensor called 3G sensor.
Unlike ordinary inclination sensors, this sensor is designed to memorize the posture (position information) of the vehicle when the alarm is set.
If the LED lamp flashes fast indicating an abnormality immediately after setting the alarm standby, and the alarm sounds one minute later, it means that the 3G sensor judged that there was a change from the location information stored when setting the alarm standby.
In this case, set the alarm standby while the vehicle is in the same position.
In particular, if the alarm standby is set when the suspension is submerged (e.g. when riding on a motorcycle), a change in the vehicle's posture will occur when the suspension returns, triggering the alarm.
If the abstock behavior still occurs immediately after setting the alarm standby, fix the sensor body firmly to the vehicle body with cable tie.
Also, please install the sensor unit and the speaker at a distance.
Diagnosis: The symptoms of a dead battery is occured
Confirmations:
If the battery is turned off without setting the alarm standby, or if the battery is turned off for a short time during the alarm standby, the regulator of the sensor itself is damaged.
The two main causes of regulator damage are as follows.
[1] When connecting the red and black cords of the sensor unit to the battery, even once the + and - are connected in reverse.
[2] Spikes that occur on the vehicle side when the main key is turned off. (Instantaneous high voltage with a sharp waveform)
To check if the regulator is damaged, disconnect the red wire of the sensor unit from the + terminal of the battery without setting the alarm standby, connect an ammeter between the battery and the red wire of the sensor body, and measure the current.
If the current is around 65mA, it is abnormal.
The normal value is around 1mA.
If there is an abnormality, repair will be required.
"Please send the product, the warranty card, and a note describing the problem to the manufacturer.
The length of the wiring has been adjusted for each model.
Includes instructions on where to install the main unit, siren and indicator.
■Shape Memory System
Adopts a digital 3G sensor that memorizes the current state of the bike in three dimensions: X-axis, Y-axis and Z-axis!
If the bike is moved even slightly, it will emit a warning and alarm sound.
Even after the alarm sound stops, the 3G sensor remembers and maintains the alarm status again!
Adoption of affixed type indicator!
Better sensor characteristics than before!
■No remote control required!
Set and unlock with just the key of your vehicle!
Simple operation by turning the key on and off.
You don't have to worry about carrying around the remote control or running out of batteries.
■High performance 3G sensor adopted!
The digital 3G sensor remembers the set state and reacts to suspicious movements.There are no false alarms!
The new version further reduces the false triggering caused by the vibration of the alarm set sound.
■Two-way warning / alarm system!
When the digital 3G sensor detects it, a warning tone will sound intermittently for 5 seconds.
In addition, if the digital 3G sensor continuously detects the alarm, it will generate a continuous alarm sound for up to 3 minutes.
■Re-memory function of digital memory sensor
After the continuous alarm sound is stopped, the digital 3G sensor remembers the current status and keeps the alarm standby status, so when the sensor detects again, the warning sound and continuous alarm sound will be generated.
■LED indicator lamp included
You can check the standby status with the attached LED indicator lamp. In addition, you can expect the effect of threatening and repelling by the flashing LED indicator lamp.
Conventional indicator lamps required drilling on the vehicle side, but the new version uses double-sided tape for easy installation.
■Remarkable power saving!
Current consumption in standby mode is only 0.9mA or less.
Power-saving type that is less than the self-discharge amount of the battery!
■No warning or alarm sound for one minute after setting!
The warning / alarm sound does not sound for one minute after setting the alarm, so it is convenient to avoid false alarms when you put the seat cover on after setting the alarm.
*However, the indicator light will respond.
■The compact design makes it easy to store in any location.
The compact design of the sensor body allows it to be stored in a small space.
*1 It may not be able to be installed on some models.
The reality of theft!
In 2013, more than 51,588 motorcycles were stolen annually.
This means that a vehicle is stolen every 10 minutes.
And about 90% of the damage has gone unresolved.
The stolen vehicles range from large motorcycles to mopeds.
Do you think that your bike is fine because it is a small moped?
Is it broken?Before people think so...
Diagnosis: The alarm is triggered immediately after setting the alarm standby
Confirmations:
The sensor of CS-550M is a special sensor called 3G sensor.
Unlike ordinary inclination sensors, this sensor is designed to memorize the posture (position information) of the vehicle when the alarm is set.
If the LED lamp flashes fast indicating an abnormality immediately after setting the alarm standby, and the alarm sounds one minute later, it means that the 3G sensor judged that there was a change from the location information stored when setting the alarm standby.
In this case, set the alarm standby while the vehicle is in the same position.
In particular, if the alarm standby is set when the suspension is submerged (e.g. when riding on a motorcycle), a change in the vehicle's posture will occur when the suspension returns, triggering the alarm.
If the abstock behavior still occurs immediately after setting the alarm standby, fix the sensor body firmly to the vehicle body with cable tie.
Also, please install the sensor unit and the speaker at a distance.
Diagnosis: The symptoms of a dead battery is occured
Confirmations:
If the battery is turned off without setting the alarm standby, or if the battery is turned off for a short time during the alarm standby, the regulator of the sensor itself is damaged.
The two main causes of regulator damage are as follows.
[1] When connecting the red and black cords of the sensor unit to the battery, even once the + and - are connected in reverse.
[2] Spikes that occur on the vehicle side when the main key is turned off. (Instantaneous high voltage with a sharp waveform)
To check if the regulator is damaged, disconnect the red wire of the sensor unit from the + terminal of the battery without setting the alarm standby, connect an ammeter between the battery and the red wire of the sensor body, and measure the current.
If the current is around 65mA, it is abnormal.
The normal value is around 1mA.
If there is an abnormality, repair will be required.
"Please send the product, the warranty card, and a note describing the problem to the manufacturer.
Caution
*Please be sure to read the instruction manual before installation.*Professional knowledge and experience are required to install this product.If you are not confident about the installation and wiring, it is recommended to rely on the experts for your safety.
*This product is for 12V motorcycles.This product cannot be installed on battery-less vehicles.
*It may not be able to be installed on some vehicles.
*This product does not completely prevent theft, but is an auxiliary device to prevent theft.Protec Corporation does not warrant against theft or misuse of the product.
*This product is not waterproof.Install the unit in a location where it will not be exposed to water.
*Install the main unit, siren and wiring in a place where they cannot be seen from the outside.
*This product cannot be installed on vehicles equipped with keyless entry.
*After installing this product, periodically inspect it to see if any parts have fallen off.
*PROTEC is not responsible for any damage or accident caused by the use of this product.
*Please note that Protec cannot be held responsible for any accidents or injuries that may occur if this product is modified.
*Protec is not responsible for any labor charges for removal or other expenses incurred during repair.
*There may be changes in product specifications due to the manufacturer's reasons.
Applicable Models
Model Page Links
Review
0.0
/ 5
(0 Review)
