Please login to check coupons
Product Detail
Specification
Sherco (Scorpa) TY125Classic / TY125-4T GasGas Randonne Clutch Spring retainer (with Spring) for Yamaha XTZ125 / YBR125 BetaRR4T125[Set components]
・Retainer x 4 pcs (Material: Made of aluminum alloy A7075 or A6061, blue anodized finish)
・Dedicated chromoly bolts x 4
・Washer for strength adjustment 1.0mm x 8pcs
・High precision Springs made in Japan 4 pcs
Description
We replaced the spring with the supplied spring and set it up so that the retainer can be assembled.
The weight strength can be adjusted to 3 levels: soft, hard, strong, medium and weak.
■Soft spring type: A little softer than stock even without washers.
■Hard spring type: Two washers at a time is a little harder than stock.
This part suppresses abnormal vibration from the clutch spring and improves the operating accuracy.
[effect]
・Smooth disengagement of the clutch.
・No slippage and secure connection.
・It will be easier to do up front!
・The friction loss is also reduced and the grip becomes lighter.
・Judder reduction.
・Improved durability of the disc.
・The strength can be fine-tuned by using washers.
When installed, it works more like a machine designed to work.
It is very effective for the bike which has a problem here, slipping or bad touch.
The spring and the pressure plate make it difficult to cause vibration.
[fitting instructions]
1, First, open the cover, remove the four bolts, and replace the spring with a spring of smaller diameter.
2, If necessary, put the attached washer on the post of the boss or in the retainer where the bolt is inserted.You can grease it.
3, Insert the retainer with the spring and bolt.
4, Tighten the bolts temporarily, and then tighten them diagonally after all four bolts are in place.The tightening torque is 6N・m 0.6kg ・m specified by the manufacturer.It's very loose and won't come loose.
[Image description]
・This set comes with a spring.
・Gas Gas RandonneThe clutches used in these models are smaller than those used in the same engine, Scorpa TY-S125F TT-R125.The discs are also small in diameter.On the other hand, the outer diameter of the spring is large.
・Hold the spring so that it does not vibrate.
・No washers.It is reinforced by 1mm.
・Washer 1pc.Standard.
・Washers 2pcs.Weakened by 1mm.It's lighter, but we think it connects better than before.
Sherco (Scorpa) TY125Classic/TY125-4T Gas Gas Randonne Yamaha XTZ125/YBR125 BetaRR4T125 there are several kinds of stock springs for these models, but there are many individual differences. Please select the number of washers and then cover the spring.
The same weight as before, but smoother connection.
You can reuse the gasket by greasing it so that you can increase or decrease the washer later.
The weight strength can be adjusted to 3 levels: soft, hard, strong, medium and weak.
■Soft spring type: A little softer than stock even without washers.
■Hard spring type: Two washers at a time is a little harder than stock.
This part suppresses abnormal vibration from the clutch spring and improves the operating accuracy.
[effect]
・Smooth disengagement of the clutch.
・No slippage and secure connection.
・It will be easier to do up front!
・The friction loss is also reduced and the grip becomes lighter.
・Judder reduction.
・Improved durability of the disc.
・The strength can be fine-tuned by using washers.
When installed, it works more like a machine designed to work.
It is very effective for the bike which has a problem here, slipping or bad touch.
The spring and the pressure plate make it difficult to cause vibration.
[fitting instructions]
1, First, open the cover, remove the four bolts, and replace the spring with a spring of smaller diameter.
2, If necessary, put the attached washer on the post of the boss or in the retainer where the bolt is inserted.You can grease it.
3, Insert the retainer with the spring and bolt.
4, Tighten the bolts temporarily, and then tighten them diagonally after all four bolts are in place.The tightening torque is 6N・m 0.6kg ・m specified by the manufacturer.It's very loose and won't come loose.
[Image description]
・This set comes with a spring.
・Gas Gas RandonneThe clutches used in these models are smaller than those used in the same engine, Scorpa TY-S125F TT-R125.The discs are also small in diameter.On the other hand, the outer diameter of the spring is large.
・Hold the spring so that it does not vibrate.
・No washers.It is reinforced by 1mm.
・Washer 1pc.Standard.
・Washers 2pcs.Weakened by 1mm.It's lighter, but we think it connects better than before.
Sherco (Scorpa) TY125Classic/TY125-4T Gas Gas Randonne Yamaha XTZ125/YBR125 BetaRR4T125 there are several kinds of stock springs for these models, but there are many individual differences. Please select the number of washers and then cover the spring.
The same weight as before, but smoother connection.
You can reuse the gasket by greasing it so that you can increase or decrease the washer later.
Caution
*The video shows the detail for Serow 225 and Serow 250.*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.