Please login to check coupons
Product Detail
Specification
made of aluminumSame height as stock
20mm forward offset from stock
Fork bracket part Thickness 28mm
Handlebar outer diameter Φ22.2mm, Length 282mm / Effective length 227mm
Height From top of bracket to top of handle 45mm
Height From the top of the bracket to the center of the handle 35mm
Handle inner diameter 16mm
Handle droop angle full adjustable
Handle opening angle full adjustable
Handle weight 845g (stock handle is 1552g)
Description
KAWASAKI Indonesia official YouTube video of the custom NINJA ZX-25R
KAWASAKI Thailandcustom-built NINJA ZX-25R is on display
This is the racing handle for the carbon cowl made by A-Tech
Because it is a race exclusive product, drilling is necessary for the installation of handlebar switches
For your reference, if you install it on the stock cowl, the droop angle is 10 degrees and the opening angle is narrower than the stock handlebar, so there is no interference.
It's offset 20mm forward from stock, but you won't feel far from the stock because the opening angle is narrowed down.
KAWASAKI Thailandcustom-built NINJA ZX-25R is on display
This is the racing handle for the carbon cowl made by A-Tech
Because it is a race exclusive product, drilling is necessary for the installation of handlebar switches
For your reference, if you install it on the stock cowl, the droop angle is 10 degrees and the opening angle is narrower than the stock handlebar, so there is no interference.
It's offset 20mm forward from stock, but you won't feel far from the stock because the opening angle is narrowed down.
Caution
*There may be changes in product specifications due to the manufacturer's reasons.*Because this is a race-specific product, drilling is required to install the handlebar switches.
*It can be installed on the stock cowl, but there is a limit to the installation range, so please adjust the droop angle and opening angle carefully to avoid interference with the cowl and tank.
*The master cylinder guard sold separately cannot be installed at the same time as it interferes with the stock cowl.When replacing the lever with an aftermarket lever, be careful not to interfere with the stock cowl.
*Please ask a qualified and skilled person such as a mechanic to install the product.
*Because this is a race-specific product, drilling is required to install the handlebar switches.
*Install the brake hose with caution, paying particular attention to its routing and angle of cut.
*If the brake hose is stressed, the brake hose must be replaced.
*Please be careful not to interfere with the tank or cowl.
Applicable Models
Model Page Links
Review
0.0
/ 5
(0 Review)