Please login to check coupons
Product Detail
Specification
[Rim / Nipple Material] R50 Rim / Aluminum[Size (inch)] 2.15 x 18
[Place to use / Usage] Rear
[Set components]
・Rim
・Nipple set
・Spoke set (for 1 wheel each)
Stock hub support
Description
3-piece set of rim, spoke and nipple for easy wheel size change
When assembling a wheel, it is basic to replace the spokes and nipples at the same time because it is difficult to remove the runout of the rim from used spokes / nipples due to deformation and wear of the screws.
The rim set includes all the necessary parts for replacement, so there is no need for complicated parts selection.
Not only the stock rim size, but also the rear 18 inch size which is the most effective size for converting motocrosser to ED machine is lined up.
[R50 rim]
Racing spec rims for racing use in MX and ED.
A7050 T6 aluminum alloy is used as the optimum material for the rim, and the cross-sectional shape is pursued.
It is designed to balance the contradictory conditions of strength and weight.
Rigid rims to reduce problems caused by rim strikes.
Bead stopper hole: Front 1 place / Rear 1 place, Valve hole: 1 place setting
[Aluminum nipple]
It is made of A2024 material and has both high strength and flexibility.
6 colors are available, you can choose your favorite color.
[stainless steel spokes]
Spoke set compatible with R50 rim.
The strength is secured by fine-tuning the composition based on SU304, which is highly resistant to rust.
When assembling a wheel, it is basic to replace the spokes and nipples at the same time because it is difficult to remove the runout of the rim from used spokes / nipples due to deformation and wear of the screws.
The rim set includes all the necessary parts for replacement, so there is no need for complicated parts selection.
Not only the stock rim size, but also the rear 18 inch size which is the most effective size for converting motocrosser to ED machine is lined up.
[R50 rim]
Racing spec rims for racing use in MX and ED.
A7050 T6 aluminum alloy is used as the optimum material for the rim, and the cross-sectional shape is pursued.
It is designed to balance the contradictory conditions of strength and weight.
Rigid rims to reduce problems caused by rim strikes.
Bead stopper hole: Front 1 place / Rear 1 place, Valve hole: 1 place setting
[Aluminum nipple]
It is made of A2024 material and has both high strength and flexibility.
6 colors are available, you can choose your favorite color.
[stainless steel spokes]
Spoke set compatible with R50 rim.
The strength is secured by fine-tuning the composition based on SU304, which is highly resistant to rust.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*The image may contain other colors.*Because of the change in wheel size, it may be necessary to modify the vehicle body during installation.(e.g., interference with the vehicle body, speedometer error, side stand height, etc.)
*Please contact a motorcycle shop with expertise and experience to install the product on your vehicle.
Applicable Models
Model Page Links
Review
0.0
/ 5
(0 Review)