Please login to check coupons
Product Detail
Specification
[Material] Iron (Electrodeposition coating + powder coating finish)[Maximum load capacity] 8kg
[Modification of cowl, etc.] Available depending on the bike model (*Refer to the product manual)
[Installation time] 0.6h with modification / 0.2h without modification
Description
The design of the motorcycle rack must take into account the load, such as impact, that is transmitted from the motorcycle to the rack not only when stopped, but also when riding.
If a problem occurs while riding, the load may fall and cause a serious accident.
In order to ensure a high level of quality, Endurance has conducted stress measurements based on engine vibration and drop impact, as well as multifaceted strength tests.
We are committed to producing products that are of high quality and robust.
Please enjoy a safe and secure motorcycle life by selecting reliable products and observing the specified loading capacity.
■ Scratch and Rust Resistant Coating
This product is finished with two layers of scratch and rust resistant electrodeposition coating and powder coating, which is also used for motorcycle frames.
Compatible with a variety of boxes
It is possible to install a variety of top cases such as the GIVI BOX, K-MAX, and SHAD, which are essential for touring. The helmet holder can be mounted on either side
There are mounting holes for the helmet holder on both sides, and if necessary, the Black Helmet Holder Set (EH507HANB1) can be mounted separately. A helmet holder can be mounted on either side.
The helmet holder can be used with the top case attached, which is useful when the top case is full and you need a place to put your helmet.
Refer to the image
■Φ7 Optional Hole
By using the Φ7 mounting hole and the helmet holder mounting hole at the rear of the rack, you can install a rear camera of the drum recorder, a commercially available hook bolt using M6 bolt, an eye bolt, etc. You can customize the rack to your own specifications by using M6 bolts, hook bolts or eye bolts.
Conformity with the safety stocks for lights
Conformity with the safety stocks for lights (From the center of the taillight, it can be seen from a plane 15° above the horizontal plane and from all positions 15° below. (Excerpt).
This product is designed for optimum styling when the rack is mounted on the bike body, while ensuring visibility from behind.
Caution
*(*1) Not guaranteed to be compatible with all manufacgturers / types of universal bases.*This product is designed to be installed on a stock bike, and we cannot guarantee that it will be installed on a bike that has been modified around the installation of this product or installed at the same time with other parts.
Also, this is a reference for installation time and is not a guide for labor charges.
*The installation of models is not checked other than those listed in the compatibility check list.If your vehicle is not listed, it cannot be installed or has not been tested.
*The installation of the product to the models that are not listed in the compatibility check list is not guaranteed.
*The color of the product may vary depending on the shooting conditions, monitor, product lot, and left and right of the set product, but returns or exchanges is not accepted.
*When a helmet holder is installed, do not ride with an object hanging on the helmet holder when riding.
*Please do not exceed the load capacity.
*There may be changes in product specifications due to the manufacturer's reasons.