Please login to check coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See all
100mm disk grinder
For Φ15mm (for Φ16mm)
Product Detail
Specification
[#120] For Intermediate Finishing[Quantity] 1 Set of 5pcs.
[Material] Abrasive Grain: Zirconia
[Size]
Outer Diameter: 100mm
Hole Diameter: Φ15
Polishing Cloth Thickness: 5mm
[Product Contents]
•Body x5pcs.
•Spacer x5pcs.
Description
It is attractive not only for flat surface polishing but also for its high degree of freedom.
Abrasive discs for metal for 100mm disc grinders.
Mainly used for weld bead removal, deburring, rust removal and flat grinding.
[Feature 1 - Effective for flat surface polishing]
Mainly used for surface grinding.
It has a milder impact than a lump of whetstone and is especially strong in planing.
[Feature 2 - High degree of freedom]
Since the back base is solid, strong cutting is available by pressing against it.
It can be used for all kinds of applications such as corner removal, hard grinding and deburring of the end face.
[Feature 3 - Only with Tornado Thunder]
The Tornado Thunder has a small part on the edge that does not touch the base it, compared with the general one.
You can also use it to make it even milder.
[Feature 4 - Grindstone Zirconia]
The grinding wheel of the polishing cloth is zirconia.
It is hard and suitable for heavy cutting, and is a strong material for cutting stainless steel.
[About the speed of the disc grinder]
When used at low speed (low rotation speed), the centrifugal force is reduced and the contact between the grinding disc and the workpiece becomes softer.
This makes the shape of the abrasive cloth more familiar to the workpiece, especially in the "soft" and "air" types where the fixing influence of the base is small, and makes it easier to perform abrasive cutting along the shape of curved surfaces.
In addition, the wear and tear, damage, biting and snagging caused by scattering of abrasive cloth can be reduced.
*It is also easy to operate evenly when finishing, leading to a reduction in scratches.
On the other hand, in heavy-duty cutting, the cutting speed becomes slower due to weaker contact and lower workload caused by reduced rotation speed.
For "Flat" and especially "Cut", recommending the use of a general high-speed rotation type.
[slow grinder]
*It is common to use a disc grinder with variable speed function, low speed and high torque type and speed controller.
[compatibility with low and high speeds]
Low speed High speed
Soft / Air / Flat / Cut
40 / 120 / 320
Abrasive discs for metal for 100mm disc grinders.
Mainly used for weld bead removal, deburring, rust removal and flat grinding.
[Feature 1 - Effective for flat surface polishing]
Mainly used for surface grinding.
It has a milder impact than a lump of whetstone and is especially strong in planing.
[Feature 2 - High degree of freedom]
Since the back base is solid, strong cutting is available by pressing against it.
It can be used for all kinds of applications such as corner removal, hard grinding and deburring of the end face.
[Feature 3 - Only with Tornado Thunder]
The Tornado Thunder has a small part on the edge that does not touch the base it, compared with the general one.
You can also use it to make it even milder.
[Feature 4 - Grindstone Zirconia]
The grinding wheel of the polishing cloth is zirconia.
It is hard and suitable for heavy cutting, and is a strong material for cutting stainless steel.
[About the speed of the disc grinder]
When used at low speed (low rotation speed), the centrifugal force is reduced and the contact between the grinding disc and the workpiece becomes softer.
This makes the shape of the abrasive cloth more familiar to the workpiece, especially in the "soft" and "air" types where the fixing influence of the base is small, and makes it easier to perform abrasive cutting along the shape of curved surfaces.
In addition, the wear and tear, damage, biting and snagging caused by scattering of abrasive cloth can be reduced.
*It is also easy to operate evenly when finishing, leading to a reduction in scratches.
On the other hand, in heavy-duty cutting, the cutting speed becomes slower due to weaker contact and lower workload caused by reduced rotation speed.
For "Flat" and especially "Cut", recommending the use of a general high-speed rotation type.
[slow grinder]
*It is common to use a disc grinder with variable speed function, low speed and high torque type and speed controller.
[compatibility with low and high speeds]
Low speed High speed
Soft / Air / Flat / Cut
40 / 120 / 320
Caution
*Please use it with the attached spacer (Japanese disc grinder is Φ15mm, overseas is Φ16mm).Applicable Models
100mm disk grinder
For Φ15mm (for Φ16mm)
Review
0.0
/ 5
(0 Review)
