Please login to check coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See all
Inazuma 400 Number of items used: 18
Inazuma 1200 Number of items used: 18
WOLF Number of items used: 9
SV650S Number of units used: 12
RG125γ Number of items used: 9
Show more
ZZR600 Number of items used: 14
ZZR250 Number of items used: 8
ZXR250 Number of items used: 16
ZX-7RR Number of items used: 14
ZX-7R Number of items used: 14
Show more
Product Detail
Specification
[Compatible disc thickness] 4.0mm-5.0mm[Material] Stainless steel
[Reference weight (13.85mm)] 7g/piece
[Components]
・SUS shims
・Wave washers
・E Ring
Description
Perfect for dressing up your machine. Plus μ Floating Pin.
Floating brake discs provide stable braking performance by reducing warping and distortion of the disc rotor that occurs during braking.
However, the floating discs used in the stock discs are caulked so tightly that they are not able to show their true performance as floating discs.
The Plus μ Floating Pin is mounted with a wave washer and E ing, and fully demonstrates its performance as a floating bait.
This is a floating pin made of machined SUS with excellent durability and wear resistance.
If you don't care about anodized aluminum color and weight saving, this pin is recommended.
Of course the pins will wear out.
As it wears out, the rattle becomes larger and the wear of the inner and outer pins progresses faster.
Since SUS pins are not easily worn, the inner and outer pins have excellent wear resistance.
Floating brake discs provide stable braking performance by reducing warping and distortion of the disc rotor that occurs during braking.
However, the floating discs used in the stock discs are caulked so tightly that they are not able to show their true performance as floating discs.
The Plus μ Floating Pin is mounted with a wave washer and E ing, and fully demonstrates its performance as a floating bait.
This is a floating pin made of machined SUS with excellent durability and wear resistance.
If you don't care about anodized aluminum color and weight saving, this pin is recommended.
Of course the pins will wear out.
As it wears out, the rattle becomes larger and the wear of the inner and outer pins progresses faster.
Since SUS pins are not easily worn, the inner and outer pins have excellent wear resistance.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*Includes 1 piece.The number of units required varies depending on the model and specification.Please check before purchasing.*The image may include other colorings and types.
*Before replacement*
When replacing the floating pin, use a new disc or a disc that has been used normally and has no problems at all.
Please do not use stock discs or aftermarket discs that are badly worn or warped.
Not only is it ineffective, but it cannot be installed properly.
Please note that the symptom will not go away even if you replace the pin if the disc has judder.
Applicable Models
Inazuma 400 Number of items used: 18
Inazuma 1200 Number of items used: 18
WOLF Number of items used: 9
SV650S Number of units used: 12
RG125γ Number of items used: 9
Show more
ZZR600 Number of items used: 14
ZZR250 Number of items used: 8
ZXR250 Number of items used: 16
ZX-7RR Number of items used: 14
ZX-7R Number of items used: 14
Show more
Model Page Links
Review
0.0
/ 5
(0 Review)
