Please login to check coupons
Product Detail
Specification
[Size] Clamp Diameter: 53mm[Position (compared to stock)]
・Hanging angle: +0.5 degree
・Bar clamp part: 5mm UP 1.5mm before
・Total width: -6mm (In the case that aperture angle is the same as stock, 32 degrees to the front)
Description
The value is small but the effect is large AELLA handlebar.
In the stock model, the aperture angle is fixed by the handlebar clamp pin and the top bridge notch, but in this product, the pin is not protruding, so the aperture angle can be adjusted within the range of motion of the steering damper.(The total width varies depending on the amount of adjustment.)
In the stock model, the aperture angle is fixed by the handlebar clamp pin and the top bridge notch, but in this product, the pin is not protruding, so the aperture angle can be adjusted within the range of motion of the steering damper.(The total width varies depending on the amount of adjustment.)
Caution
*Numerical values are compared to stock.*Overall width is for the same aperture angle as stock (32 degrees).
*Special tools are required to remove the switch box.(Stock part number: 88713.4967)
*Overall width is the value of both ends of the handlebar, not including the bar end.
Applicable Models
Model Page Links
Review
0.0
/ 5
(0 Review)