Please login to check coupons
Product Detail
Specification
Compatible Stock Part Number: 12892-45003Quantity: 1 sheet
Outer Diameter: 29.5mm
Thickness: 2.30mm
Description
This product is a shim required when adjusting the tappet of the engine.
These shims are available in thicknesses from 2.15 to 3.10, but the shims that come with your new vehicle are thicker so that they can be adjusted.
Therefore, since the gap is to be adjusted by replacing the shim with a thinner one, BRC has shims in the rnage of 2.15-2.55 which are commonly used.
These shims are available in thicknesses from 2.15 to 3.10, but the shims that come with your new vehicle are thicker so that they can be adjusted.
Therefore, since the gap is to be adjusted by replacing the shim with a thinner one, BRC has shims in the rnage of 2.15-2.55 which are commonly used.
Caution
*The original shims in the engine are also heat-treated so they will not wear out and can be reused.*To identify the shim size, measure the gap between the tappet shim and camshaft to the T-mark, then apply the thickness of the original shim and the valve clearance value.Therefore, a stock service manual is required.
*There may be changes in product specifications due to the manufacturer's reasons.
Model Page Links
Review
0.0
/ 5
(0 Review)