Please login to check coupons
Quantity
100% Original
7 Days Warranty
Free Cashback
Net Price
Applicable Models
See all
For XJR400 4HM type 93-05
Product Detail
Specification
[Material] Stainless Steel[Used Location/Application (-for)] Engine Cover
[Quantity] 1 Set for 1 Vehicle
[Specification]
Cap Type
JAPAN-made Product
Description
Stainless Steel Engine Cover Bolt, Cap Type
This kit is to change the bolts around the crankcase of the engine to stainless steel hexagon socket head bolts.
Easy maintenance, prevention of screw licking, fixation, improvement of corrosion resistance, dress up of engine area.
■Required size package for each model
The length is measured according to the vehicle, and the required number is packed.
The length, screw size and pitch are measured and packaged for one unit.
There is no waste and no need to measure the size than buying a small bag of several pieces at Home Depot and getting all sizes.
■Installation method
It is not necessary to remove the engine cover when installing.
If you replace the bolts one by one without removing all of them, the oil will not flow and can be replaced.
If the bolt is too hard, apply a cleaver such as CRC556 without strain.
A special instruction manual is provided for each model.
The length of the bolt and where it should be used are indicated in the instruction manual with a picture or illustration.
Please use it in case of used vehicle, fixed with common screws, or assembled by mistake.
This kit is to change the bolts around the crankcase of the engine to stainless steel hexagon socket head bolts.
Easy maintenance, prevention of screw licking, fixation, improvement of corrosion resistance, dress up of engine area.
■Required size package for each model
The length is measured according to the vehicle, and the required number is packed.
The length, screw size and pitch are measured and packaged for one unit.
There is no waste and no need to measure the size than buying a small bag of several pieces at Home Depot and getting all sizes.
■Installation method
It is not necessary to remove the engine cover when installing.
If you replace the bolts one by one without removing all of them, the oil will not flow and can be replaced.
If the bolt is too hard, apply a cleaver such as CRC556 without strain.
A special instruction manual is provided for each model.
The length of the bolt and where it should be used are indicated in the instruction manual with a picture or illustration.
Please use it in case of used vehicle, fixed with common screws, or assembled by mistake.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*The bolt may differ from the stock bolt by a few millimeters, but this is not a problem.*Lengths are not listed to prevent counterfeit products.Only the part and the number of items are available.
Applicable Models
For XJR400 4HM type 93-05
Model Page Links
Review
0.0
/ 5
(0 Review)
