Please login to check coupons
Product Detail
Specification
Color: Silver paintMaterial: Made of die-cast aluminum
Built-in oil element
[Components]
Clutch Cover (Silver) X1
・Bearing x 1
・Oil level gauge x 1
Oil filter cover (silver) X1
・O-ring (38.6 x 2.6) x 1
・Oil filter element x 1
・Filter spring x 1
Cap (14mm)(Silver) X1
・O-ring (13.8 x 2.5) x 1
Description
Ensure an extractable oil path to the oil cooler.This is a die-cast aluminum clutch cover that combines function, performance and dress-up.
By incorporating the element type oil filter into the clutch cover, the weight of the stock centrifugal type engine oil filter (approx. 1120g) can be reduced and the throttle response can be improved.
By taking out the oil line from the clutch cover side, the oil flow rate is higher than that from the cylinder side, so the cooling performance of the oil cooler is expected to be improved.
By incorporating the element type oil filter into the clutch cover, the weight of the stock centrifugal type engine oil filter (approx. 1120g) can be reduced and the throttle response can be improved.
By taking out the oil line from the clutch cover side, the oil flow rate is higher than that from the cylinder side, so the cooling performance of the oil cooler is expected to be improved.
Note
Other colorings are here.
Please visit the manufacturer's website for more information about the product.
Click here for Kitako general information page.
Please visit the manufacturer's website for more information about the product.
Click here for Kitako general information page.
Caution
*When removing the centrifugal engine oil filter, a lock nut wrench (Honda part number: 07916-6390001) is required.*Kitaco center lock nut wrench (674-1013900) cannot be used due to insufficient depth.
*The high tension cord & sensor cord clip and the stock oil level gauge need to be partially cut.