Product Detail
Specification
Color: BlackMaterial: steel
[Set components]
Swingarm x 1
Washer, Nut x 2
Bearing x 2
Description
Ride height lowered by 35mm & swingarm length 50mm longer!
I want to lower the vehicle, but I also want to extend the wheelbase.
Low, long.Even with the narrow, it's a massive custom.
35mm down, 50mm long lowered & long machined stock (USED) machined swingarm.
Newly replaced bearings, baked acrylic paint.
●Regarding the 520 chain
It is difficult to say in general because it depends on the outer diameter of the sprocket (number of teeth).
If the outer diameter of the sprocket is the same size, it should be 110 links from the link pitch or +6 links from the stock swingarm, but please measure on the actual vehicle.
Reference value:
Swingarm Length Stock Comparison: +52mm
520 link pitch: 15.875mm
I want to lower the vehicle, but I also want to extend the wheelbase.
Low, long.Even with the narrow, it's a massive custom.
35mm down, 50mm long lowered & long machined stock (USED) machined swingarm.
Newly replaced bearings, baked acrylic paint.
●Regarding the 520 chain
It is difficult to say in general because it depends on the outer diameter of the sprocket (number of teeth).
If the outer diameter of the sprocket is the same size, it should be 110 links from the link pitch or +6 links from the stock swingarm, but please measure on the actual vehicle.
Reference value:
Swingarm Length Stock Comparison: +52mm
520 link pitch: 15.875mm
Caution
*Not available for early type swingarm*The chain should be changed to 138L (87-38398OR) in 428.
*Must be modified to prevent interference with fenders.
*Torque rod and brake arm extension plate (sold separately) must be installed or the stock one must be extended.
*Not available with chain guard.
Model Page Links
Review
0.0
/ 5
(0 Review)