Please login to check coupons
Product Detail
Specification
For AP Racing CP2696 Caliper320mm disc compatible
Compatible brake pads, special stainless steel brake hoses, instruction manual and parts list included
Description
Comstar wheels have wide spokes, so if you try to install an opposing caliper on a stock disc, the spokes will come in contact with the inside of the caliper and installation cannot be done.
Therefore, a 320mm large diameter disc was adopted and the caliper was offset to the outer circumference to secure the clearance between the caliper and the wheel.
Opposed calipers can be installed.
"It is compatible with brake discs with an outer diameter of 320mm, a rotor thickness of 5mm, and an offset of 26.5mm (the same offset as the CB-F stock disc).(Brake discs are not included in the kit.)
Compatible with AP Racing CP2696 caliper.(Caliper is not included in the kit.)
Bolt on to CB750FZ / FA and CB900FZ stock front suspension.For customers who want to strengthen the brakes while keeping the stock atmosphere.
The caliper support was designed based on the support of Freddie Spencer's vehicle (80-81 model) that was raced in AMA Superbike.
Special brake pads are included to fit the 320mm disc rotor width.
Exclusive stainless mesh brake hose is included.(Hose Color: Black Smoke Coating)
The caliper support is available in two colors: silver and black.
Instruction manual and parts list are included.
In the event of damage due to tipping, etc., the parts can be supplied separately.
The recommended master cylinder diameter is 14mm for a horizontal master cylinder (master cylinder diameter 5/8 will be hard to touch).
In case of radial master, please select the corresponding master cylinder diameter.
Therefore, a 320mm large diameter disc was adopted and the caliper was offset to the outer circumference to secure the clearance between the caliper and the wheel.
Opposed calipers can be installed.
"It is compatible with brake discs with an outer diameter of 320mm, a rotor thickness of 5mm, and an offset of 26.5mm (the same offset as the CB-F stock disc).(Brake discs are not included in the kit.)
Compatible with AP Racing CP2696 caliper.(Caliper is not included in the kit.)
Bolt on to CB750FZ / FA and CB900FZ stock front suspension.For customers who want to strengthen the brakes while keeping the stock atmosphere.
The caliper support was designed based on the support of Freddie Spencer's vehicle (80-81 model) that was raced in AMA Superbike.
Special brake pads are included to fit the 320mm disc rotor width.
Exclusive stainless mesh brake hose is included.(Hose Color: Black Smoke Coating)
The caliper support is available in two colors: silver and black.
Instruction manual and parts list are included.
In the event of damage due to tipping, etc., the parts can be supplied separately.
The recommended master cylinder diameter is 14mm for a horizontal master cylinder (master cylinder diameter 5/8 will be hard to touch).
In case of radial master, please select the corresponding master cylinder diameter.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*CB750FB (without 35Ф TRAC fork, Comstar wheel on the back), US specification CB900FB / FC (without 39Ф TRAC fork, Comstar wheel on the back), EU specification CB900FA / FB (without 37Ф TRAC fork, Comstar wheel on the back) cannot be installed because the caliper and wheel contact with the caliper.(It can be installed on if you convert to table comster wheel of CB750FZ/FA etc. or boomerang comster wheel of CB750FC etc.)*The kit comes with special brake pads.
There is a part where the rotor does not touch the lining of the commercial brake pad, and it may interfere with the floating pin.
When using commercially available brake pads, be sure to modify them in accordance with the instruction manual.
*Caliper, 320mm disc, brake fluid not included.