Please login to check coupons
Product Detail
Specification
[Color] Black plating[Material] Steel
[Size]
Handle O.D.: Φ25.4
Handle Inner Diameter:Φ21.4
[Specification]
Bolt-on for models
Dimple / Harness clamp hole processed
Electronic throttle support
Clutch Cable (Hose) Fitting: Available
Throttle cable compatibility: Available
Brake hose fitment: Need little adjustment
[Compatible stock part number] 55924-14
[Compatibility]
Stock Harley-Davidson Heated Grips
Kijima Heat Demons for Harley (Electronic throttle compatible)
[Country of manufacture] Japan
Description
The grip is moved to the front without changing the stock silhouette!
This handle has the same height and width, but the grip position is moved forward (30, 50, 70mm back).Since it is designed exclusively for the model, the switch and wiring are bolt-on, and there is no need to change the structure.
POINT1: Exclusive model design
Because it is designed for exclusive use of the model, wires and wiring are bolt-on
*Some models may require the replacement of brake hoses and wires.
POINT2: Stock shape
It is stock shape and only the grip part is close to the stock, so you can bolt it on without losing the image.No structural changes are required because the height and width remain unchanged.
POINT3: Dimpled
Dimples and holes for wiring clamps are already machined, so the switch box and wiring can be neatly bolted on.
POINT4: Beautiful plated finish
Beautiful chrome finish with stock quality.You can choose the color from chrome plating or black plating.
Bolt-on handlebars for specific models
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.
The angle is the same as the stock one, so you can form a good riding position without damaging the image.
This handle has the same height and width, but the grip position is moved forward (30, 50, 70mm back).Since it is designed exclusively for the model, the switch and wiring are bolt-on, and there is no need to change the structure.
POINT1: Exclusive model design
Because it is designed for exclusive use of the model, wires and wiring are bolt-on
*Some models may require the replacement of brake hoses and wires.
POINT2: Stock shape
It is stock shape and only the grip part is close to the stock, so you can bolt it on without losing the image.No structural changes are required because the height and width remain unchanged.
POINT3: Dimpled
Dimples and holes for wiring clamps are already machined, so the switch box and wiring can be neatly bolted on.
POINT4: Beautiful plated finish
Beautiful chrome finish with stock quality.You can choose the color from chrome plating or black plating.
Bolt-on handlebars for specific models
The design is based on the stock handlebar shape, but the grip part has been shifted in parallel.
The angle is the same as the stock one, so you can form a good riding position without damaging the image.
Note
* The image is only for reference. The image shown may differ from the actual product.
Caution
*Please be careful when installing the grip heater with built-in bar.*Installation of stock built-in grip heater is possible, but EFFEX aftermarket parts (such as heat demons made by Kijima) cannot be installed.
*The inside diameter of the handle is Φ21.4 (except for FLSTF).
*△1 = Release of the hose clamp at the neck is required.
*The inner diameter of the handlebars of the EFFEX HD BAR is slightly smaller than that of the EFFEX HD BAR, so please be careful when installing an inner type grip heater.
*Brake hoses, cables and harnesses do not need to be replaced.