Please login to check coupons
Product Detail
Specification
Color: Black[Type 2]
Corresponding Fork Diameter: Φ43
Fork Span: 210mm
for Separate Handlebars
Offset Top Bridge
Offset: 35mm
Material: Bracket/2017S Stem Shaft/7075
with Stem Top/Bottom Taper Roller Bearing
Description
SP Stem Kit, which was developed specifically for high speed average run from winding roads to circuit courses.
Understem is machined from a 50mm thick A2017S billet block.
The fork offset amount is 35mm, which is more focused on securing the trail.
[offset steering stopper]
Machined A2017S.The stopper body can be processed by making it detachable.It helps to fine-tune the steering angle.
[7075 machined stem shaft]
The stem shaft, which is subjected to the most stress, is machined from high-strength duralumin 7075 for high precision.Light weight and high rigidity.
[tapered head stainless steel bolt]
All M8 stainless steel bolts used in the fork clamps are tapered head type bolts.Pre-drilled wiring holes.
[joint functions]
You can install a joint to make the front brake hose three-way and a bracket for the headlight A / J.Mounting screw holes M6 / P-1.00, pitch 46mm between screw holes.
Understem is machined from a 50mm thick A2017S billet block.
The fork offset amount is 35mm, which is more focused on securing the trail.
[offset steering stopper]
Machined A2017S.The stopper body can be processed by making it detachable.It helps to fine-tune the steering angle.
[7075 machined stem shaft]
The stem shaft, which is subjected to the most stress, is machined from high-strength duralumin 7075 for high precision.Light weight and high rigidity.
[tapered head stainless steel bolt]
All M8 stainless steel bolts used in the fork clamps are tapered head type bolts.Pre-drilled wiring holes.
[joint functions]
You can install a joint to make the front brake hose three-way and a bracket for the headlight A / J.Mounting screw holes M6 / P-1.00, pitch 46mm between screw holes.
Note
Other colorings are here.
Mirror holder set is here. * This item can not be cancelled, returned nor exchange after placing an order.
Caution
*Because of the short offset setting of 35mm, the handlebar angle will be greatly impaired.*By lowering the mount of the gasoline tank to the rear and cutting the steering stopper part, the practical turning angle can be increased though it is a little.However, there are some faces whose the steering angle is less than that of a 40mm offset stem.
*Moving the tank mount backwards is not an easy job, depending on the method, so please ask a professional shop with skills and experience to do it.
*Image 2 shows the color: Silver.
* Please note in advance that cancellation and/or return of this product cannot be accepted once the order has been placed.
Model Page Links
Review
0.0
/ 5
(0 Review)