Product Detail

Specification

•L Size (Half Type)
•Size: Overall Length Approximately 210 x Overall Height 130 x Overall Width 100 x Tail Width Upper 28 x Tail Width Lower 55 x Tail Height90cm
•Included Parts: Storage Bag

Description

Many of you may have had the experience of using a conventional body cover when the muffler was hot and it melted. This non-melting motorcycle cover is perfect for those who have such an experience!. Not only for the muffler, but also for the heat of the engine.. It's made with a lot of attention to detail other than just not melting. A practical and durable bike cover with thick Ox 300D fabric on the outside surface.. One-touch anti-windblown belt in the center. In addition, there are four large keyholes in the front and back that can be attached to a 70mm diameter lock, and the front and back are color-coded for easy identification.. There is no need to spread them out to see which one is in front and they are highly effective in preventing both theft and wind-spray..

*Product Features*.
The new heat-resistant material allows you to cover the muffler and exhaust pipes even after they are hot after running..
(Red front side and black rear side for easy identification of the front and rear of the cover.. )
One-touch windproof belt (adjustable from either side)
Comfortable air ventilation near the left and right mirrors.. It helps to prevent rusting caused by moisture..
Includes a storage bag for the body cover.

Note

AE-02009&AE-03009AE-03010&AE-03011Click here for other sizes

* The image is only for reference. The image shown may differ from the actual product.

Caution

*The surface melts in the heat.Please be careful when covering.
*The shape of the body of a motorcycle varies greatly depending on the model.The dimensions shown are for reference only.
*The product may not be applicable to some models and years.
*If your vehicle is not listed in the application chart, please refer to the dimensions of each part or contact us.
*We do not accept returns after opening the package or installation.
*The cover article is waterproofed on the surface, but because it is sewn, rainwater may penetrate through the seams.Not fully waterproof.
*The lifetime of the cover depends on the climate and operating conditions.Regardless of the period of use, if the water repellency of the cover decreases significantly, it is the end of its life and you should purchase a new product.
*Be sure to remove the wet cover and dry both the bike and the bike cover before use.Leaving the paint on the surface for a long time can damage the surface of the paint and cause rust and mildew.
*When repainting, make sure that the paint is sufficiently dry before covering.(Dry for 3 months for normal paint and 6 months for metallic paint.)
*In case of strong wind, there is a possibility that the wind chill may enter into the bike cover, so please take enough care of it including prevention of falling.
*We are not responsible for any accidents caused by inadequate use or natural disasters (typhoons, etc.).
*There may be changes in product specifications due to the manufacturer's reasons.