Please login to check coupons
Product Description
V-Strom250SX 23 (8BK-EL11L)
Specification
0.25(h)/-
[Bar effective length]
155mm
[Pipe Diameter]
Φ22.2
・Made of steel
・Electrostatic coating (matte black)
・Ash silver M8 cap bolt collar included
Description
Offset bracket that adjusts the stock windshield position to two positions: stock position and 50mm up.
The bar holder on the top of the bracket allows for mounting electronic devices such as smartphones, navigation devices, and USB power supplies on the top of the meter for easy viewing.
Both ends of the mounting bar are split so that it can be used with a threading type clamp.
Both sides of the mount bar are equipped with PREMIUM ZONE cap bolt collar M8 for both function and looks.
Caution
*Depending on the shape of the aftermarket windshield, there is a possibility that the bracket may come in contact with the windshield and scratch the windshield side, or it may not be able to be installed at the same time.
*When used with aftermarket windshields at your own risk, be sure to use them in the stock position only.The product and the bike body may be damaged by the load.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
-
SUZUKI
/ 5
When removing the OEMScreen, hold the Screen and carefully remove it when removing the last oneWhen installing the bracket, it is easier to temporarily assemble the Multi Bar, but since the holes for installing the Multi Bar are long holes, it is better to tighten the bracket by hand to some extent to prevent scratches on the bracket.The bracket is not completely fixed, but slightly loosened for installation.Use top and middle holes when mounting Shield at 5cmUpThe Bracket can be mounted straight by temporarily fixing the holes on the underside of the Shield.All that remains is to tighten the Bolt on the OEMScreen. The Bolt on the upper side must be tightened with the nut in place or the paint on the Bracket will be damaged.Even a 5cm rise in height is enough to provide wind protection.The Cap Bolt Cover can also be personalized by choosing a color that is sold separately (although it is more expensive...) View detail
I bought this for mounting my phone mount, it is Exclusive Design so it is easy to install and has a high quality feel. I am glad I was able to place the phone at eye level, and it would be even better if the Bracket was lightweight! View detail
Currently, this is the only thing that can combine the function of raising the Screen in addition to the Bracket function.I think this is a good product for VSTROM250SX.I'm planning to put a Radar detector or something on the Bracket, but I don't have any problem with the bar thing.As for the 50mmUp feature, there is no problem, as it is not too different.The effect is better than no effect at all, even though it is a little bit larger than the original target of the body (up to the shoulder area).It is a product that is sure to be nested, as options are almost non-existent at the moment! View detail
This is comfortable equipment for viewing Smartphone Navigation without lowering the eye level.The installation required a 6mm Allen Wrench in addition to the on-board tool because the tool was not enclosed.Just raising the height of the Screen by 50mm is totally windproof.The ETC Antennas are located behind the Screen, but even if they are raised 50mm, they are protected within the frame, so rainwater will be large and strong. View detail
It is easy to install.However, the phone mount bar vibrates slightly while driving, so the phone must be securely attached. View detail