Accessory Power Connection Kit and Sub Harness
Product number: XEL910HANS1
4.0 (1 Review)
฿1,503
Please login to check coupons
Product Description
Universal
Universal
Specification
Case body: Aluminum (black alumite)
[Dimensions (approx)]
Main unit: 22.3 x 37.8 x 36.5
Bullet terminal: Φ3.5
[Components] (Refer to the instruction manual)
・Accessory Power Supply Connection Kit x 1
・Sub Harness x 1
[installation time]
Depends on the vehicle
6 months (or up to 5000km of riding after installation)
Description
You can easily take out three accessory power sources linked to the vehicle key ON, and the size of the main unit itself is very compact and waterproof, so you don't have to worry about the installation place.
The rated outputs of the three accessory power supplies are 7.5A x 2 and 5A x 1 (total 20A) respectively, and PTC thermistors are used inside.
High output is realized by taking power directly from the battery.
・Length from the unit to the bullet terminal: Approx. 250mm
・Length from the main unit to the battery connection terminal: Approx. 1300mm
・Length of the accessory power supply bullet for the relay from the main unit: Approx. 1300mm
Caution
*Do not install in a place where heat is likely to accumulate because the main body generates heat.
*The main body is waterproof, but the terminal part should be treated so that it is not exposed to water.
*The output power is as high as 20A, but not all vehicles can be used with 20A.Depending on the vehicle, battery condition, or other factors, the load on the battery may increase, which may cause the battery to run out of power.
*The color of the product may vary depending on the shooting conditions, monitor, product lot, and left and right of the set product, but returns or exchanges is not accepted.
*Connecting parts such as crimp terminals are not waterproof.
*Connection to the accessory power supply for the relay is required.
*Please check the wiring diagram of the vehicle and confirm which terminal of the brake lamp switch is to be interposed before installation.
*There may be changes in product specifications due to the manufacturer's reasons.
/ 5
I bought this to make it easier to add more electrical components. The way to connect it is to connect it to the Battery and then to the Attachment, but you need to use Tester to find out which one is connected to the Attachment. You need to use the Tester to find out which one is connected to the Attachment, and whether the 12Bolt is coming from the key On state. I was worried about this part, so I asked a knowledgeable friend (a mechanic) to help me. I think people like me who have never done this before are worried. If you have never done this before, you may be worried.The other thing to keep in mind is that the size of the product is a little large, so it will take up a lot of space.For myself, I don't think I'll need Sub harness for a while. View detail