Please login to check coupons
Product Description
Specification
Description
However, the long rear fenders spoil the neo-retro style of the vehicle.
This fender eliminator kit removes the stock rear fender to make the rear view simple and clean.
The rear view is simple and sporty with the body and license plate as close as possible.
●Fender eliminator, clean rear style
CB125R with authentic body frame.The neo-retro atmosphere is also very motorcycle-like.However, the rear fender spoils the image.
This fender eliminator kit removes the rear fender and moves the license plate closer to the body to give the rear area a sporty look.
It emphasizes the clean feeling and realizes the original style of the motorcycle.
●Relocation of blinkers & reflector bracket
The blinker bracket is also set differently for CB125R and CB250R, because of the positional relationship with the license plate.
The blinkers also have a natural, clean and integrated layout.The reflector bracket is a separate unit and can be removed.
Two types of reflectors are available, one using the stock reflector and the other with a set of slim reflectors.You can choose according to your preference.
Caution
*The image may contain other types.
/ 5
I wanted to change the Fender Eliminator on my '18 BirdCity125 and move the RearCameraPosition on the DriveRecorder to the original Reflector position. I was also convinced that the size and design of the '17 BirdCity155 and the '18 BirdCity125 were the same, so I checked the specifications and looked at the rear view of both vehicles to make sure they were the same and purchased the kit.The first thing that puzzled me when I received it was that it came with an LED License Plate Lamp.I had ordered a KOSO Bracket with License Plate Light because I thought I had to prepare and install a License Plate Light separately when converting to Fender Eliminator! I had ordered a KOSO Bracket with License Plate Light, so I had to return that one!When machining, the Fender is removed from the body and masked according to the Instruction Manual, then carefully cut using a blade for plastic or PPMaterial, and then file it with Paper No. 100 or higher to cleanly shape it.For installation on the vehicle body, the License Plate is temporarily assembled, and holes are drilled after checking the position and levelness of the holes and marking.The 7mm hole was specified, but I don't have one, so I used a 6mm drill and had no problem.The holes drilled are also cleaned up with a stick File.Wiring of License Plate Light is cut by Lamp side Limit of OEM License Lamp to use OEM Coupler and Wiring, and after wiring process, it is crimped to Female Bullet Type Terminal.The wiring of the attached License Plate Light is also crimped to Male's Bullet Type Terminal, and since the wire is very thin, a solder is added to connect both.The light came on safely when I installed it in the car body and turned on the main key to check the light.Just to be clear, on the body side, Black is Minus and Blue is Plus.On the License Plate Light side, Black is Minus and BlackWhite is Plus.The wiring routing was done using the hole where the Reflector was originally attached, and the process was completed in the space on the reverse side of the Reflector.After that, side cover, helmet in, etc. were all put back together, and this Bracket was finally combined with DAYTONA's with ReflectorLicense Plate Bracket and attached to the vehicle body to finish the work.In summary, the License Plate Light is quite bright and the position of the light affects the RearCamera's image at night, making it appear bluish.I have found that shading the tip of the camera lens with something that can be used as a flange will solve this problem, so I will take measures later.I am very happy with the Refreshing Rear, which was heavy.The drawback is that when the side cover is removed for maintenance or adjustment, the bracket is directly attached to the side cover, so it has to be removed, which increases the time and effort required.As a supplement, it is not compatible with MODELs prior to 18.Also, we do not know about BirdCity after Model change, so it is only BU54 (SEC1-J) Conformity with respect to (Diversion is possible.) Please understand that View detail
2016 Yamaha Zuma USDM. The part is very good. The fit and finish is fantastic and the install is pretty straight forward. BUT if youre in the US, this part will remove your OEM license plate light, so what you will need to do is cut the bottom oval of the black plastic tail light surround. The models outside the US have this precut, but we only have the outline. This will allow the tail light to serve as the license plate light. If you look at the description pictures on the listing, you'll notice the light hole. ALSO, the part is for plates somewhere outside the US therefore the license plate screw holes do not match up, you will need to re-drill two holes closer to the middle of the plates. I got the kit that ustilizes the OEM reflector, but shortly after install, I cut that bracket off for a reflector delete. View detail
[How is it used?I installed this on my commuter vehicle, a CYGNUS X 5 model. I was wondering if I would do the Fender Eliminator since I use it for commuting even on rainy days.I got tired of the wild OEMFender that I saw every time I looked behind me and decided to install it.Was the one you received as per Image?The number of parts is smaller than I expected, and I thought it was such a Compact.The material is probably steel, and the paint is weak and will soon peel off if bumped during installation, so be careful. Be careful when you bump it during installation.Was the installation difficult?It is not difficult, but it is a bit tedious because the entire rear cowl must be removed.However, there are only a few Bolts that are stopped, so having the interior stripped makes the work much faster.I use Emon's inner lining peelers.The Instruction Manual is attached, but it is gubby and not clear. I think you will understand it if you look at the thing and the actual car and think about it.I had to check the contents of the Instruction Manual for the center plate on the Net to install it because it made no sense to me.How was your experience with it?Honestly, it sucks except for the Styling from the back and the ability to install without cutting the OEM.I would not recommend it to others, I feel.First of all, the accuracy of the product is poor. I fine-tuned it many times until I was satisfied.Plate bending accuracy may be poor, or there may be a gap between the boti or when tightening the number.Bracket has floated away and the only way to tighten it up is to force it.I had no choice but to hand Bent and install it myself to some extent.[Included Parts:were they on?The pictures are as shown. The basic bolts are OEM.[Was there anything that disappointed you?As described in the photo at the end of the image, the back of the Number is immediately Battery case.Wiring is also fully visible. 10,000$ Fender Eliminator. I wish they would make it more seriously.OEM Fender is $3,000 for a new one. It's not that expensive.We recommend WirusWin's OEMCut type Fender Eliminator.Wiring is also not really possible for the governor to be in full view, so I will make my own mudguards out of plastic dampproofing.As I said at the end, I cannot recommend this Fender Eliminator. View detail
It's just a Fender Eliminator, but it's too hard to put on. View detail
OEMFender to be removed and installed TypeRefreshing the best on the market.All the back must be removed from the Seat to install it.Large oddity.By the way, there is no manual enclosed on how to remove it, so if you can't do it, pay the labor charge and have a PRO do it for you.Reverse side is bare Wiring, but there is a Fender on the Tire, so it may be Large sturdy. View detail