Please login to check coupons
Product Description
[Rim manufacturer] EXCEL common DID etc. [Rim size] 17-19×2.15 WM
Specification
(1) Pre-cut nipple tape
(2) Heat-resistant double-coated sealing tape
(3) Heat-resistant protective sheet
(4) Air valve
(5) Work gloves
(6) OUT☆EX sticker, Hologram sticker
(7) Explanatory notes
Description
The unsprung load is reduced by 1.5-1.8kg front and rear.
(Bikes be pleased)
Nice handling.
(Riders be pleased)
Changing a tire is easy and fast.
(Mechanics be pleased)
Tube is not required.
(It leads to ecology)
Reasonable.
(Good for Wallet)
Special 3-layer construction for clear.
(Nipple can be seen and turned, which is great)
Even if you get a nail in the tire.
(Easy to fix a flat tire)
Even if the spokes break.
(Nipples and spokes can be replaced, repair kit required)
Maximizes the flexibility of the spoked rim.
(Softness conquers hard)
You'll get better fuel consumption.
(It leads to ecology)
And race-proven performance.
Leftover tape can be used when replacing spokes or in case of air leaks due to installation errors.
The material has excellent heat resistance (140 degrees), weather resistance and adhesiveness, and has passed the durability test without any problem.
Note
Caution
(The following items are required for installation.Degreasing agents such as thinner or brake cleaner, rags, scissors, cutters, sandpaper, hair dryer)
*The kit for 17 and 18 inches can be used up to 19 inches.
*Rims without the indication of rim shape (WM or MT) are WM type.
*There may be changes in product specifications due to the manufacturer's reasons.
/ 5
I asked the Shop to do the processing work, but now that I have made it Tubeless, I can go on long trips without worry. View detail
Easy website to buy item suit my bike. But i dont know why need 100 word at the review, so i have to write abcdefghijklmnopqrstuvwxyz View detail
MOTARDWheel was able to get a used one.Tire was also no good, and Puncture and Tube were also no good, so we installed the Tube Eliminate Kit while we were at it.Spoke nipple was also dirty with rust, and the welds on the rim had been roughed up with a grinder, so it took a long time to prep the surface.Rim with Stages (about 5 cm long) I roughed it up with Leutor to eliminate the (about 10 cm) Next, the Grinder was further sanded with a Wire cup brush. Next, I used a Wire cup brush on the Grinder to make it shallower. (about 12 cm) The rest was smoothed by tracing the wire cup brush area with a BrassCup brush.The nipple is also brushed all around with a wire cup brush, then brushed with a Brass Cup brush to remove scratches. Finally, degrease the nipple with a cleaning thinner and remove iron dust with an air gun. In addition, the Instruction Manual says to wash with Alkali detergent and dry. However, I didn't like rust, so I wiped it with Brakes cleaner.The rest of the work was done as per the Instruction Manual.Assembling the Tire was easy with no Tube.After 3 days of air injection at 3 kg/cm, we assembled the large sturdy unit into the vehicle and completed the assembly. View detail
I purchased ZETA's MOTARDWheel and converted it to Tubeless!It was the first time for me to do it, but I was able to do it after reading the Instruction Manual and watching the video!The Nipple was worked on as is without modification, but there was no leakage!Be careful as it is a one shot deal! It was Large sturdy even if it bent a little or got air in it! It was easy to do because it came with special gloves!I don't know how many years it will last, but if it lasts long enough, it might be a good deal! View detail
It was quite a large job, starting with the preparation of the wheel (the work content changed depending on the wheel's condition), double-sided taping, and protective taping.(Some of the Wheel was in bad shape.)Double-sided tape pasting is very difficult.(I wanted to put it on Beauty but couldn't. If I could have stuck it there, it would have been Large sturdy. (I wanted to stick it to Beauty but I couldn't, but Large was tough enough to stick it there.)Protective Tape could be applied to Beauty if applied calmly.It took a lot of patience, but I am happy that I was able to make it Tubeless and wear Radial. View detail