Please login to check coupons
Product Description
HAYABUSA 22-23
Specification
[Specification]
・Number of position adjustment steps: 18 clicks
・1-click adjustment range: 2.2mm (0.6 degree)
・Repair Parts Identification Symbols[Lever] R1 [Holder] SB-05
Description
・The high-precision cutting ensures that there is no rattle after assembly, and the lever can be pulled straight, allowing the rider to concentrate on riding by accurately transmitting the power of the fingertips.
・The lever position function that can be fine-tuned to accommodate different hand sizes and glove thicknesses in summer and winter.
High holder accuracy and fine lever position adjustment
STF billet lever with a wide range of colors. This lever is designed by utilizing the know-how of the ACTIVE adjustable billet lever that is used in racing, and is highly practical and has excellent cost performance.
The high accuracy of the holder allows you to concentrate on your riding without wasting time pulling the lever.
[Features]
・Adjustable function
The lever positions of the brake and hydraulic clutch can be fine-tuned using dials.(1 click 1.75mm operation / 250cc)
You can select the lever position that suits you best with the touch of a finger.
・Wire type clutch lever adjustment
The lever position can be adjusted steplessly by tightening or loosening the screws.
・Foldable lever
In the event of a fall, the tip of the lever collapses to absorb the impact.Reduces damage to the cylinder and lever holder.
・Hole processing
The hole at the end of the lever reduces wind pressure when driving.
・Lightweight processing
Both light weight and rigidity are achieved by machining strong materials.
Material: A6061 (Anodized aluminum)
・Repair Parts
The lever that may be damaged when falling down is set to repair.
Note
Caution
*The images may include other products and colorings.
*The information with (*) mark in the Remarks is the compatibility information based on the matching with the stock lever part number.
*There may be changes in product specifications due to the manufacturer's reasons.
-
SUZUKI
/ 5
Texture is good!It is easy to grip and the Adjuster can be set in detail!This Adjuster is very cool, matching the GSX1300R HAYABUSA's Accent color Red.Installation can be done with an 8mm Wrench, but the brake hoses may get in the way when installing.But if it was a little better, it could be installed by an amateur. View detail
I used to use the previous Active, but this one looks good with a rigid appearance and precision. View detail
Fine-tuning is now possible.
The lever for adjusting the grip width of U-.KANAYA's billet lever had stuck and was no longer adjustable, so I replaced it with a Dial adjustable ActiveSTFLever. It is foldable, so there will be less damage in the event of a fall. The grip is also comfortable. The Neck is more expensive. It seems that you can buy one set of U-KANAYA Lever for about the same price. View detail
It is hard to break even if it falls over. Even if it breaks, there is a spare at an affordable price. View detail
Used on YZF-R7 radipon diverted to ZX-10R.The OEM was adjustable and I had no complaints about the design, but the lever position didn't feel right, so I replaced it.It didn't have to be this good of a product, but since it is a new Pump standard, this is the only option.STFClutch was also used in other cars, but compared to the rounded STFClutch, the Cut-out Edge and hard finish.It is not greasy and should be greased before installation.Naturally, there was no rattling in the collapsible part like cheap Chinese ones, and after the replacement, the touch became tight as if the cylinder diameter had been increased to a larger size.The adjustment range is larger than that of OEM, and the closest distance is shorter, so fine adjustment can be made with the middle finger while gripping the Axel.It is good to be able to adjust it without having to push it forward like the OEM, but it may not be good for the hardcore users since the REMOTE CONTROLLER cannot be attached.If the adjustment Screw is tightened too much, it may get stuck.I think the texture would be even better if the seat surface of the retractable part was gouged out to make a taper bolt like the flight lever, the bolt on the retractable part looks a little floaty. View detail