Please login to check coupons
Product Description
Z125 17-20
Description
It is very popular in the circuit and the street in Japan.
The number of users of STOMP GRIP is increasing all over the world.
[stomping on stomp grips]
1. Clean the surface to be applied.(When using clear, please remove dirt and water stains with compound before starting work)
2. Degrease the surface to be applied.
3. Perform positioning.
4. Apply from the edge so that air does not enter.Peel off the backing paper while pasting.(Take your time and apply slowly from the edge, little by little)
It takes 24 hours for the adhesive strength of Stomp Grip to stabilize.Full adhesion requires 72 hours.
If you use the product before it is fully bonded, it may peel off or shift.
*Please pay special attention to the stomp grips that are attached to the frame surface.
Caution
*Stomp Grip's adhesive is very strong.
・Please take special care when attaching to the frame surface.
・If you remove it forcibly, the paint may be damaged or peeled off.When peeling it off, heat it up with a heat gun or the like to reduce the adhesive strength after peeling it off.
*The image may contain other colors and products.
*There may be changes in product specifications due to the manufacturer's reasons.
-
KAWASAKI
/ 5
Purchased this for my Z125Pro. The one I received was defective in that the adhesive was taken away by the backing paper. I immediately took a picture and contacted them and they handled it as an initial defect and sent me a replacement within a few days (although it also took a few days from the time I contacted them until they started to respond…). The replacement looked fine, as did the adhesive. However, when I finally tried to install it, I found that the Quantity:Pair (for Left and Right) The shape was different in I thought it was another defective product, so I compared it with the first one I received, which I had not yet sent, and found that it seemed to be Quantity:Pair (for Left and Right) The unevenness seems to be a spec. I had no choice but to cut and shape it myself and installed it. It was a little problematic, but it seems to help the Knee Grip. I think the price of 12,100 yen is still expensive. View detail
If you have it in stock,,,, WeBig's delivery time is very good.If you are in a hurry, go to WeBig?.Company R and Company a have inventory, but I can't rely on it. View detail
The price is high but the effect is really outstanding!It also improves the ease and effectiveness of the knee grip.I think items essential for Ritter SS and MiddleSS.The durability is about 1-3 years, so it is rather expensive, but Jeans, etc.It is suitable for both those who wear pants without grip and those who wear leather suit or leather pants.A product that can be recommendation.It also helps to reduce fatigue in touring and other activities.When stretching, warm up the product with a dryer and warm up the car body with warm air, etc. to make it easier to stretch and adhere quickly. View detail
I bought this to keep my butt from gapping and coming forward from the Seat when I ride my NC750X.I think it is effective because I feel less pain in my calves and knees when I ride without much awareness of it compared to before.Since there is no Instruction Manual for pasting, I referred to the product introduction pictures on webike and traced the area where my thighs, knees, and shins come in contact with the pad with a pencil, straddling the motorcycle, and pasted the pad according to the line (If I pasted the pad as shown in the introduction pictures, the longer pad would not have enough area to contact the base of my thighs. (If you paste the pad as shown in the introduction photo, the longer pad has less area where it contacts the base of the thigh, so I used the Quantity:Pair (for Left and Right) pasted in reverse.)I thought the price was too high for the contents, but I'm glad I bought it because it seems to be effective. View detail
I bought it in BlackSince it is Universal Type, I cut it and put it on the area where my knee and thigh hit.Knee Grip Pad has been a common Material:I used to put the Carbon Style ones on, but they were in a fixed position and didn't fit my knees…Grip power is sufficient for the need.It is easier than not putting anything on. View detail