Radiator Guard
Product number: RGK-Z900-00
฿7,968
Please login to check coupons
Product Description
Ninja1000SX 20-21
Specification
Stainless steel (SUS304)
[Size]
Board thickness:0.8t
[Components]
・Emblem color: All colors included (black, red, blue, yellow, green)
Description
How do we balance the conflicting themes of "cooling efficiency" and "protection performance"?
Pebbles and garbage rolled up from the front tire, insects flying at the light..etc
These will damage the radiator core which is made up of aluminium fins.
When the fins are crushed, the cooling effect is lost, and in some cases, the water line may be damaged, causing a coolant leak...
Features made by the Etching Factory
The radiator core guard of the etching factory has been tested many times mainly in the 8 hours endurance road race in the midsummer which is the most severe for the radiator.
The placement of the mesh pattern, the thickness of the mesh lines, and the aperture ratio are all based on feedback from the racing scene.
Fine mesh pattern in the center and coarse mesh pattern on both sides.
This ensures that pebbles and debris spun off from the front tire are guarded by a fine mesh in the center that matches the width of the tire.
The coarse mesh on both sides has been designed with an aperture ratio that takes into account the conflicting themes of "cooling efficiency" and "protection performance".
There is also a reason for the choice of material.
In the case of aluminum or titanium, the mesh line width can only be achieved by lowering the plate thickness (lowering the strength), but by using stainless steel (SUS304 0.8t), the ideal line width can be achieved without lowering the strength.
Based on the above, the core guard is not only an item to maintain the performance of the vehicle, but also has a dress-up effect to show off the beauty of the vehicle in a casual manner.
To protect, to charm.
It is recommended with confidence for your valuable machine.
The emblem is available in five colors.
Choose a coordinating color to match the color of your machine.
Caution
*Since the product is made of thin stainless steel plate, the edge of the product may hurt your hand.Please handle with care.
*There may be changes in product specifications due to the manufacturer's reasons.
-
KAWASAKI
/ 5
The Radiator core guard is always installed, but I have my own obsession with it, and the one with the Brand logo blocking the vents is not an option.Since it is a functional part, we try to choose products that are simple and have different sizes of vents.This time, the brand I usually buy from didn't have a release for the Ninja 1000SX, so I chose the Etching factory that fits the requirements.Product feedback after opening the package, nice job (lol).First time I bought it and it is as good as its reputation.Bulk parts are Material:Stainless Steel, it's not just a Nut, it's a J-Nut for ease of use. Moreover, it is perfect that it has anti-vibration rubber.I like the fact that the price is unchanged even though it is CostUp above Spec.As for the installation, the Ninja1000SX is designed so that the front inner fender cannot be removed by itself and there is no space to work on the core guard.If you don't want to hurt them as our predecessors have said, you'll have to take all the side cowl off, even if it's a hassle.If the Cowl comes off, the rest will be easy, I thought, and then I hooked the top end and put the anti-vibration Rubber to the top and bottom terminals before fixing it with J-Nut & Bolt.:It is necessary to set it, but since it is a small and long part, dexterity is required.I have to redo this process several times just to get it right.If you can install it according to the manual, you won't hear any unwanted vibration noise when driving, and I think it's a well thought out product.If you dare to point it out, I thought it would be better to illustrate the mounting position of the Rubber not only in the text, but as an example of mounting.The above is the evaluation of someone who has had the experience of making a scare noise at a certain RPM when I put on a certain company's Core Guard and took measures on my own. View detail
The bare Radiator was installed for protection.I chose that one because I wanted to unify the color with Black, but Large was the right choice.The only thing left to do is to hope that the cooling performance will not drop. View detail
I was impressed by the ease of installation and high precision. As expected of a made-in-Japan product.The center section has a fine mesh to prevent the front tire from rolling up.The design is good and it has a custom feel.I am glad I put it on. View detail
Installed on a 2024 cbr600rr. Installed on a new car before the Core was crushed. View detail
Purchased as a stepping stone protection since I drive around town and Touring Maine. 2024 installed with no problems.It is necessary to remove the SIDE cowl, but the instruction manual of the vehicle also describes how to do this, so even a beginner can do it while checking the instructions. View detail