หน้าแรก

【KOHKEN (KOHKEN DENKA)】สติ๊กเกอร์และจุก RCS Master

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ราคาเต็ม: ฿371
คะแนนวีไบค์: 4

รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คุณสมบัติของสินค้า]

เนื้อหาผลิตภัณฑ์ : ฝายาง, สติกเกอร์

[คำอธิบาย]


[รายละเอียดสินค้า]

เรามีชุดรูปรับอัตราส่วน RCS Master ใหม่ Mekura ฝายางและสติกเกอร์สำหรับซ่อม!

มีสติ๊กเกอร์สำหรับ RCS Master และ Kohken CNC ฝาถังน้ำมัน ..

รีวิวสินค้า

    Purchased with Koken MechanicalClutchL 29 HolderLever.
    Lever Koken AeroShort ,, Half lever well forgive.
    In the vicinity of Lever pivot, it was unmarked in photos, but bremboMark
    Instead, proudly
    "Koken" Including letters ,,
    What's wrong with RCSSeal, installing, thinking
    "I feel a sense of grasshopper sensation despite what I am suffering somehow ,,
    Do not be excessive. " (o'Д`o) ノ゙

    【What made you decide the purchase?】
    Since I replaced it with StandardLever of brembo's RCSMaster cylinder to Cut-outLever of antlion, Sticker of ItalianColor symbolizing brembo's Master cylinder has gone.
    I tried to look it up and found out that it was out as Repair Parts so I bought it.

    【How was it actually used?】
    Unlike StandardLever, Lever of antlion has no place to accommodate the Sticker, so if you go closer and look closely well you will find that you have a feeling of retrofitting, but you were able to paste StandardLever into your model well.
    I am satisfied with the natural finish so that it seems to be StandardLever? Of brembo from a distance.
    For me personally, without this Sticker, I do not get a satisfaction feeling that I own brembo, so I think that I bought the price though I put it.

    【Mounting was difficult?】
    It is easy to install because it is only the BlindRubber of the hole part for Sticker and Ratio adjustment.
    Sticker is Small so I think that if you have Tweezers or something you can avoid the tragedy that gets dirty on the sticky side by dropping it. Also do not forget to degrease the place to paste.
    Blind's Rubber says nothing like hang, but for the time being, I think that if you push a part of the outer circumference and turn it with your fingers GRU RI and your fingers, it will fit in arbitrary.

    【Please tell me the installation point and hang】
    Same as above

    [Is there anything I was disappointed about?]
    There is no dissatisfaction with quality by saying bremboOEM of security, but it is actually a little expensive to be over 600 yen to Sticker and Blind's Rubber.
    In my case, if only Sticker was available, Blind's Rubber could be ported from StandardLever, so I wanted Sticker and Blind's Rubber to be sold separately if possible.

    【Hope for Manufacturer - Please let me know if you have any improvement points]
    Same as above

    【Have you compared items?】
    None

    [Others]
    Although standing for nearly six months after pasting, it seems that it adheres well to the face of Cut - out, so it will not come off.
    I wrote that the price is high, but just thinking that the price is high for the content, the Gold amount itself has never been Large, so if it seems to deteriorate and come off, I will try to Repeat again.

    【What made you decide the purchase?】
    Since I replaced it with StandardLever of brembo's RCSMaster cylinder to Cut-outLever of antlion, Sticker of ItalianColor symbolizing brembo's Master cylinder has gone.
    I tried to look it up and found out that it was out as Repair Parts so I bought it.

    【How was it actually used?】
    Unlike StandardLever, Lever of antlion has no place to accommodate the Sticker, so if you go closer and look closely well you will find that you have a feeling of retrofitting, but you were able to paste StandardLever into your model well.
    I am satisfied with the natural finish so that it seems to be StandardLever? Of brembo from a distance.
    For me personally, without this Sticker, I do not get a satisfaction feeling that I own brembo, so I think that I bought the price though I put it.

    【Mounting was difficult?】
    It is easy to install because it is only the BlindRubber of the hole part for Sticker and Ratio adjustment.
    Sticker is Small so I think that if you have Tweezers or something you can avoid the tragedy that gets dirty on the sticky side by dropping it. Also do not forget to degrease the place to paste.
    Blind's Rubber says nothing like hang, but for the time being, I think that if you push a part of the outer circumference and turn it with your fingers GRU RI and your fingers, it will fit in arbitrary.

    【Please tell me the installation point and hang】
    Same as above

    [Is there anything I was disappointed about?]
    There is no dissatisfaction with quality by saying bremboOEM of security, but it is actually a little expensive to be over 600 yen to Sticker and Blind's Rubber.
    In my case, if only Sticker was available, Blind's Rubber could be ported from StandardLever, so I wanted Sticker and Blind's Rubber to be sold separately if possible.

    【Hope for Manufacturer - Please let me know if you have any improvement points]
    Same as above

    【Have you compared items?】
    None

    [Others]
    Although standing for nearly six months after pasting, it seems that it adheres well to the face of Cut - out, so it will not come off.
    I wrote that the price is high, but just thinking that the price is high for the content, the Gold amount itself has never been Large, so if it seems to deteriorate and come off, I will try to Repeat again.

    I bought a spare of SelectorCover of Radial master.
    Degradation of resin parts is quick, so if there is spare there is no reason to not wait for arrangements.
    After all, Brembo master's satisfaction is high, but I think that the satisfaction of appearance is also Large thing.

    I bought a spare of SelectorCover of Radial master.
    Degradation of resin parts is quick, so if there is spare there is no reason to not wait for arrangements.
    After all, Brembo master's satisfaction is high, but I think that the satisfaction of appearance is also Large thing.

    When purchasing Cau Ken's Mechanical Clutch-holder Kit, since a brembo RCS MASTER Sticker could be stuck, it purchased. It becomes
    RCS Brake master and a set and is large satisfaction.

สินค้าที่มีผู้เข้าชมมากที่สุด