ขายึดไฟเลี้ยวท้าย

  • รหัสสินค้า: SSR-UTB-02

    ฿2,729

    คะแนนวีไบค์: +27 pt

    ข้อมูลการจัดส่ง

    • ระบบกำลังคำนวณวันที่พร้อมจัดส่ง.....
    ถึง ThaiLand
    เปลี่ยน
    เลือกที่อยู่:
    ThaiLand
    ค่าจัดส่ง ฿100

    จำนวน

    สินค้าแท้ 100% รับประกัน 7 วัน รับเงินคืนฟรี ราคาสุทธิ

    ใช้สำหรับรุ่น

    ดูทั้งหมด
    YAMAHA
    SR400 SR500 SR400 SR500 SR400 SR500
    แสดงเพิ่มเติม

    รายละเอียดสินค้า

    รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

    คุณสมบัติ

    วัสดุ : สแตนเลส SUS304
    พร้อมสายไฟต่อ

    รายละเอียดคำถาม

    เพื่อความปลอดภัยในการใช้งานกระเป๋าอาน ฯลฯ อาจใช้ไฟเลี้ยวที่ด้านข้างของไฟท้ายซึ่งอาจมองเห็นได้ง่าย

    คุณอาจใช้ไฟเลี้ยวธรรมดา แต่ปัญหาอาจเกิดขึ้นหากติดตั้งกับบังโคลนหลังเนื่องจากน้ำหนักของมันเราจึงขอแนะนำให้ใช้ไฟเลี้ยวที่เบากว่าจากผู้ผลิตบุคคลที่สาม. ขอแนะนำให้ใช้ไฟเลี้ยวที่เบากว่าจากผู้ผลิตบุคคลที่สาม

    คำอธิบาย

    * ไม่รวมไฟเลี้ยว
    คุณอาจใช้ไฟเลี้ยวธรรมดา แต่อาจเกิดปัญหาได้
    ถ้าติดกับบังโคลนหลังเนื่องจากน้ำหนักของมัน
    ดังนั้นเราขอแนะนำให้ใช้ไฟเลี้ยวที่เบากว่าจากผู้ผลิตบุคคลที่สาม
    ในบางกรณีไฟเลี้ยว
    จะทำให้ไม่สามารถติดแผ่นสะท้อนแสงเดิมได้
    คุณจะต้องได้รับตัวสะท้อนแสงขนาดเล็กหรือเพิ่มแหวนรอง
    ระหว่างแผ่นสะท้อนแสงและเบาะนั่ง.

    คำเตือน

    * มันอาจจะไม่เปิด

    ใช้สำหรับรุ่น

    YAMAHA
    SR400 SR500 SR400 SR500 SR400 SR500
    แสดงเพิ่มเติม

    ทบทวน

    3.7

    / 5

    (3 ทบทวน)

    0

    2

    1

    0

    0

    กรอง:
    เลือกดูจาก:

    Relocated for Side Back

    07 Mar 2019
    4.0
    I installed it on my SR400fi, and the OEM Blinker is in the way of the Side Back So I relocated it and installed a DAYTONA Small blinker

    I saw some imprecisions struggling with the wiring, so I asked Large People Shop for help
    I took it to the Reflector with a partial exposure, and then took it to the back of the Reflector & rarr; Fender back side The attached Wiring was not long enough, so I had it extended The attached Wiring Tube has been changed to Spiral Tube

    I like the look and feel of the Refreshing
    ดูรายละเอียด
    ฉันติดตั้งมันบน SR400fi ของฉัน และไฟกระพริบของ OEM อยู่ที่ด้านหลังด้านข้าง ดังนั้นฉันจึงย้ายมันและติดตั้งไฟเลี้ยวขนาดเล็ก DAYTONA

    ฉันเห็นความไม่แม่นยำในการเดินสายไฟ เลยขอความช่วยเหลือจากร้านค้าขนาดใหญ่
    ฉันนำมันไปที่รีเฟลกเตอร์ด้วยการเปิดรับแสงบางส่วน แล้วนำไปที่ด้านหลังของรีเฟลกเตอร์ & rarr; บังโคลนหลัง ต่อสายไฟยาวไม่พอ เลยต่อขยาย ต่อท่อต่อ เปลี่ยนเป็นท่อเกลียว

    ฉันชอบรูปลักษณ์ของความสดชื่น
    ดูรายละเอียด
    แสดงที่มา

    For relocating Blinker when attaching Side bag

    20 Aug 2016
    4.0
    Both Blinker and Tail light use OEM.
    If I stop at a signal wait or the like, it is horribly blinking Blinker & Rear Fender and I feel like shrinking the lifespan of related parts remarkably. As stated in Manufacturer's item description, Light Company Small blinkeretc of Other Company Product. It is better to use.
    Because Wiring can not avoid for Edge in the base of Tail light, I think that it will break sooner or later.

    Used only when necessary, the usual way to use is Recommendation. If you plan to wear it permanently, you need a little ingenuity.

    The goods themselves are finished with beautiful welding and I think they are beautiful. Please be careful not to make a mistake at the time of installation.
    ดูรายละเอียด
    ทั้งไฟเลี้ยวและไฟท้ายใช้ OEM
    ถ้าฉันหยุดรอสัญญาณหรืออะไรทำนองนั้น มันกะพริบอย่างน่ากลัว Blinker & Rear Fender และฉันรู้สึกเหมือนลดอายุการใช้งานของชิ้นส่วนที่เกี่ยวข้องอย่างน่าทึ่ง ตามที่ระบุไว้ในคำอธิบายรายการของผู้ผลิต Light Company Small blinkeretc ของผลิตภัณฑ์อื่น ๆ ของ บริษัท มันจะดีกว่าที่จะใช้
    เนื่องจากสายไฟไม่สามารถหลีกเลี่ยงสำหรับ Edge ในฐานของไฟท้าย ฉันคิดว่ามันจะหักไม่ช้าก็เร็ว

    ใช้เมื่อจำเป็นเท่านั้น วิธีปกติคือ คำแนะนำ หากคุณวางแผนที่จะสวมใส่มันอย่างถาวร คุณต้องมีความเฉลียวฉลาดเล็กน้อย

    ตัวสินค้าเองมีการเชื่อมที่สวยงามและฉันคิดว่ามันสวยงาม โปรดระวังอย่าทำผิดพลาดในขณะติดตั้ง
    ดูรายละเอียด
    แสดงที่มา

    It might be an epoch-making product for who consider the move of a rear blinker to attach a side bag. However, there are two points to check before purchase. Since it attaches to the bolt position of the tail lamp side of normal, whether stay can be attac

    19 Apr 2012
    3.0
    It might be an epoch-making product for who consider the move of a rear blinker to attach a side bag. However, there are two points to check before purchase. Since it attaches to the bolt position of the tail lamp side of normal, whether stay can be attached with the motorcycle. How the affinity of the thread part of the cylindrical position and blinker of stay and the stay which attaches a blinker. There are some which the length of the thread part of a blinker is insufficient. These two points are needed to check. Since it is easy to rust on the character of a material in respect of quality and the measures against rain to wiring are not taken against this stay itself, a a measure may be required depends on a car body. ดูรายละเอียด
    อาจเป็นผลิตภัณฑ์ที่สร้างยุคสำหรับผู้ที่พิจารณาการย้ายไฟเลี้ยวด้านหลังเพื่อติดกระเป๋าด้านข้าง อย่างไรก็ตาม มีสองจุดที่ต้องตรวจสอบก่อนซื้อ เนื่องจากยึดกับตำแหน่งสลักของด้านโคมไฟท้ายแบบปกติไม่ว่าจะติดตะเกียบกับมอเตอร์ไซค์ได้หรือไม่ ความสัมพันธ์ของส่วนด้ายของตำแหน่งทรงกระบอกและไฟกระพริบของพักและพักซึ่งติดไฟกระพริบอย่างไร มีบางส่วนที่ความยาวของส่วนด้ายของไฟกระพริบไม่เพียงพอ สองจุดนี้จำเป็นต้องตรวจสอบ เนื่องจากง่ายต่อการเกิดสนิมบนคุณลักษณะของวัสดุในด้านคุณภาพ และไม่ได้นำมาตรการป้องกันฝนไปจนถึงสายไฟมาใช้กับตัวพักนี้ อาจต้องมีการวัด aa ขึ้นอยู่กับตัวรถ ดูรายละเอียด
    แสดงที่มา

    สินค้าที่ดูก่อนหน้า

    มีสินค้าในสต๊อกพร้อมจัดส่ง

    สินค้าแนะนำ

    สินค้าที่เกี่ยวข้อง

    สินค้าแนะนำ

    สินค้าที่ดูล่าสุด

    New Custom Article

    ดูทั้งหมด