หน้าแรก

【Magical Racing】กันรอยถังน้ำมัน

ภาพผลิตภัณฑ์มีวัตถุประสงค์เพื่อประกอบการอธิบายเท่านั้น และอาจแตกต่างจากผลิตภัณฑ์จริง
ราคาเต็ม: ฿939
คะแนนวีไบค์: 9

    • รหัสสินค้า:
    • 001-GTP000-3701

ระบบกำลังคำนวณวันที่พร้อมจัดส่ง.....


ตรงรุ่น:

Universal

ดูเพิ่มเติม

รายละเอียดสินค้า

รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate แสดงต้นฉบับ

[คุณสมบัติของสินค้า]

ชนิดเปียก
ขนาด : ความหนา / 3mm

[คำอธิบาย]

* สินค้าชิ้นนี้จะทำการผลิตหลังจากได้รับคำสั่งเท่านั้น ทางเราจะแจ้งระยะเวลาการจัดส่งสินค้าที่แน่นอนให้ท่านทราบหลังจากได้รับคำสั่งซื้อเรียบร้อยแล้ว
* สินค้ารายการนี้ไม่สามารถทำการยกเลิก ส่งคืน หรือเปลี่ยนแปลงภายหลังการสั่งซื้อได้

[คำเตือน]


* โปรดทราบล่วงหน้าว่าไม่สามารถยอมรับการยกเลิกและ / หรือการคืนสินค้านี้ได้เมื่อสั่งซื้อไปแล้ว

ตรงรุ่น

    • Universal

รีวิวสินค้า

    I do not like that Garbage collects in the part where Seat hits Tank, Tank does not want to drink White like it, I purchased this item in various ways.

    Adhesion is strong, so it stretches, so it sticks to me as thoughtful !!. After that, it is easier to cut and the rest seems to be usable (I want to fill the gap). Cut to about half in the image.

    I do not like that Garbage collects in the part where Seat hits Tank, Tank does not want to drink White like it, I purchased this item in various ways.

    Adhesion is strong, so it stretches, so it sticks to me as thoughtful !!. After that, it is easier to cut and the rest seems to be usable (I want to fill the gap). Cut to about half in the image.

    When it is leather Pants, there is Gap etc. at hang off, Position does not fit, so we were thinking about Pad purchase, but we found this high product with high Cost performance and purchased.
    Because it is not by car model, processing such as cutting is necessary, but it is easy to cut with scissors, so processing is very easy. Also, than the thickness I thought (3 mm Meter) There is firm adhesion, the surface is also processed like SnakeSkin, so feel comfortable and Gapetc. No, I can firmly hold it.
    However, since Material is Sponge, I think that it will be scraped when the number of contacts increases, so I think that it is necessary to change it at that time, but the price is much cheaper compared to other products, so even if the frequency of replacement increases I think there is no problem.
    Because it is a very highly cospa product, it is recommended for those who are considering purchasing Tank Pad.

    When it is leather Pants, there is Gap etc. at hang off, Position does not fit, so we were thinking about Pad purchase, but we found this high product with high Cost performance and purchased.
    Because it is not by car model, processing such as cutting is necessary, but it is easy to cut with scissors, so processing is very easy. Also, than the thickness I thought (3 mm Meter) There is firm adhesion, the surface is also processed like SnakeSkin, so feel comfortable and Gapetc. No, I can firmly hold it.
    However, since Material is Sponge, I think that it will be scraped when the number of contacts increases, so I think that it is necessary to change it at that time, but the price is much cheaper compared to other products, so even if the frequency of replacement increases I think there is no problem.
    Because it is a very highly cospa product, it is recommended for those who are considering purchasing Tank Pad.

    Since it was the first Tank-pad purchase, although it wavered, it was made the product made from a reputable Magical racing whether it would be made pure.Is the handle of the sheet outer skin of
    FAZER8 (2013) also resembled?Since it was not the elegance only for
    , it was not able to attach, without suiting Tank form, but it was processed drastically.The procedure is easy.Pasteboard is cut into the form of the
    Tank pad.The
    paper pattern is set by a Tank, and an excessive portion is turned up.
    (3) An excessive portion is cut.Become symmetrical at this time.
    (4) It is checked again whether according to a Tank, it is satisfactory.The paper pattern like the point is set and it cuts into the pasteboard of the double-stick tape of the
    Tank pad by a Cutter.Or [ that it is better to cut more shallowly by not cutting at once several times at this time ].A break is shallowly put in in the center of the pasteboard of
    double-stick tape.He plans to turn off only the pasteboard to the last.Position doubling is carried out to the
    Tank, and one side of pasteboard which put in the break like the point is stuck so that it may not shift removing little by little.In that case, it is good to work carefully so that a joint may not overlap or a crevice may not open.Although front riding was not carried out usually [ ], it is the favor which stuck the Tank pad and the weight shift became possible drastically.

    Since it was the first Tank-pad purchase, although it wavered, it was made the product made from a reputable Magical racing whether it would be made pure.Is the handle of the sheet outer skin of
    FAZER8 (2013) also resembled?Since it was not the elegance only for
    , it was not able to attach, without suiting Tank form, but it was processed drastically.The procedure is easy.Pasteboard is cut into the form of the
    Tank pad.The
    paper pattern is set by a Tank, and an excessive portion is turned up.
    (3) An excessive portion is cut.Become symmetrical at this time.
    (4) It is checked again whether according to a Tank, it is satisfactory.The paper pattern like the point is set and it cuts into the pasteboard of the double-stick tape of the
    Tank pad by a Cutter.Or [ that it is better to cut more shallowly by not cutting at once several times at this time ].A break is shallowly put in in the center of the pasteboard of
    double-stick tape.He plans to turn off only the pasteboard to the last.Position doubling is carried out to the
    Tank, and one side of pasteboard which put in the break like the point is stuck so that it may not shift removing little by little.In that case, it is good to work carefully so that a joint may not overlap or a crevice may not open.Although front riding was not carried out usually [ ], it is the favor which stuck the Tank pad and the weight shift became possible drastically.

สินค้าที่เกี่ยวข้อง

【World Walk】G2 Protection Tank Pad
กันรอยถัง G2 World Walk CB1000SF (Super Four, Big-1)
【SP Takegawa】Knee Grip Pad
กันลื่นข้างถัง SP Takegawa BENLY CD50
【World Walk】G2 Protection Tank Pad
กันรอยถัง G2 World Walk CB1000R (2018-)
【US SUZUKI Genuine Accessories】Carbon & Yellow Tank Pad
กระเป๋าติดถังน้ำมันคาร์บอน US SUZUKI Genuine Accessories GSX-R1000 (Gixxer ,GSXR)
【World Walk】G2 Protection Tank Pad
กันรอยถังน้ำมัน G2 World Walk CRF1000L Africa Twin Adventure Sports

สินค้าที่มีผู้เข้าชมมากที่สุด

【US HONDA Genuine Accessories】Side Tank Pad
Side Tank Pad US HONDA Genuine Accessories CRF1000L Africa Twin Adventure Sports
【World Walk】G2 Protection Tank Pad
G2 Protection Tank Pad World Walk Tenere700
【US SUZUKI Genuine Accessories】Carbon Gsx-R Tank Pad
กันรอยถังน้ำมัน Gsx-R US SUZUKI Genuine Accessories GSX-R600 (Gixxer ,GSXR)
【US SUZUKI Genuine Accessories】Tank Pad [Tank Pad].
Tank Pad [Tank Pad]. US SUZUKI Genuine Accessories
【US YAMAHA Genuine Accessories】Tank Pad
Tank Pad US YAMAHA Genuine Accessories Tenere700