In order to equip the ape 100 with PD22 carburetor, the method of whether an external article like this product is purchased or to purchase the components of XR100 separately is needed.
PD22 -- hondas, such as XR100, -- since it is used even when it is pure, although acquisition is a direction which is easy to carry out, inlet pipes with which the ape 100 is equipped do not find it easily comparatively.
Although Mukawa sells the big cab kit using PD22, this product becomes the thing which extracted only PD22 from the kit.
It will be a kind set if it carries out from people with PD22 carburetor simple substance.
although it purchased and being instantly seen together with PD22 -- truly -- the elegance only for PD22 -- it has equipped easily.
This kit is a type which is the combination of the intake manifold made from aluminum, and the rubber insulator made from a rubber, binds these tight in a band, and equips with a carburetor.
It is the mechanism of being hard for vibration to get across to a carburetor also by a one cylinder vehicle with much vibration.
A right point is having come to be able to perform removal of a carburetor freely with one driver.
Since after carburetor exchange has the work of MJ exchange etc., the point that a carburetor can be removed easily is good.
A place [ as a fault, a cab body becomes unstable a little at the time of wearing ].
When connecting a carburetor with a rubber insulator, a band fastens, but seemingly, it will damage, if this is fastened too much.
Since an instruction manual also has a statement, it is careful.
Since there was also a report of having fastened, and it having been crowded also with certain sites too much, and having actually damaged at them, lump condition is carefully in all.
Moreover, the accuracy of the screw of inlet manifold attaching is bad.
It was likely to lick, when it was not a firm wrench.
I want this point to improve.
It seems that there is nothing for the moment after wearing although the exhaust air omission of each part, etc. were checked spraying a parts cleaner.
An instruction manual is two sheets by paper both-sides printing of A4.
The slot side fastens, there is a statement to the order of a lump, and it was thought that it was a comparatively polite statement.
In those who want to carry out custom, without seldom worrying since-izing can be carried out [ big carburetor ] very simply although pleasure which is attached while trying various components is lost, it is recommendation.
In addition, similarly those who want to use a normal air cleaner box as it is need to purchase the connecting tube of Mukawa, as it is in a photograph.