รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
[คุณสมบัติของสินค้า]
ความยาว: 110mm
ใช้ร่วมกับแฮนด์บาร์ที่มีเส้นผ่านศูนย์กลาง:Φ22.2mm
วัสดุ: ยาง Elasถึงmer (ยางยืดหยุ่น)
ส่วนปลายของปลอก: ปลายปิด
จำนวน: 1 คู่ (สำหรับซ้ายและขวา)
Length: 110mm
Corresponding Handlebar Diameter:Φ22.2mm
Material: Elastomer
Grip End Processing: Closed End
Quantity: Pair (for Left and Right)
[คำเตือน]
* ผลิตภัณฑ์ในภาพใช้สำหรับอ้างอิงเท่านั้น
* มีสีอื่นในภาพ
* ไม่สามารถใช้ได้กับรถ SUZUKI บางรุ่น
*Images are for reference only.
*The image may include other colorings.
*This product is not compatible with some Suzuki vehicles.
[รายละเอียดสินค้า]
เป็นประเภทปลายปิดที่สอดคล้องกับรถที่ไม่ได้ติดตั้งปลายแฮนด์
•วัสดุนี้ใช้อีลาสโตเมอร์ที่มีประวัติพิสูจน์แล้วว่าเป็นวัสดุยึดเกาะ!
•เป็นการออกแบบที่เป็นต้นฉบับโดยคำแนะนำของทีมแข่งต่อต้านการควบม้า 8 คน
Closed end type for vehicles without bar ends.
●The material used is elastomer, a proven grip material.
●Completely original design based on the advice of the racing team participating in the 8 Endurance Race.
ใช้กับรุ่นรถ: Others
Easy to use
It was Closed End, but I cut it out with Cutter and use it as Opening.
Because there is also a groove for wiring, it can be used widely from street riding to Circuit, and because it is relatively cheap, it is also a good point that it is easy to replace even if it wears out. ดูรายละเอียด
ง่ายต่อการใช้
มันคือ Closed End แต่ฉันตัดมันออกด้วย Cutter และใช้เป็นการเปิด
แสดงที่มาเนื่องจากมีร่องสำหรับเดินสายไฟด้วย จึงสามารถใช้ได้อย่างกว้างขวางตั้งแต่การขี่บนถนนจนถึงสนามแข่งรถ และเนื่องจากราคาค่อนข้างถูก จึงเป็นจุดที่ดีที่จะเปลี่ยนได้ง่ายแม้ว่าจะเสื่อมสภาพก็ตาม ดูรายละเอียด
ใช้กับรุ่นรถ: Others
OEM hardened and replaced
This is a replacement from the OEM
The length is about 2mm shorter than the OEM Product, but the installation feeling is fine.
I think the Design of the groove is Parenthesis good.
The color is divided taste, but I chose Black. It was a correct answer without becoming gaudy. ดูรายละเอียด
OEM ชุบแข็งและเปลี่ยนใหม่
นี่คือการทดแทนจาก OEM
แสดงที่มาความยาวสั้นกว่าผลิตภัณฑ์ OEM ประมาณ 2 มม. แต่ความรู้สึกในการติดตั้งนั้นใช้ได้
ฉันคิดว่าการออกแบบร่องนั้นดี
สีจะแบ่งรสชาติ แต่ฉันเลือกสีดำ เป็นคำตอบที่ถูกต้องโดยไม่ฉูดฉาด ดูรายละเอียด
ใช้กับรุ่นรถ: Others
Installed on TOWN MATE 90
I had a cheap Grip from PartsCenter but it was too loose and a little too long, so I bought this one.
It was Exactly 110?
The hole is pretty tight.
Bond used a G17. ดูรายละเอียด
ติดตั้งบน TOWN MATE 90
ฉันมีกริปราคาถูกจาก PartsCenter แต่มันหลวมเกินไปและยาวไปหน่อย ดังนั้นฉันจึงซื้อเครื่องนี้
แสดงที่มามันคือ 110 เหรอ?
รูค่อนข้างแน่น
บอร์นใช้ G17 ดูรายละเอียด
ใช้กับรุ่นรถ: Others
Racing grip
I made this Racing grip with Handlebar exchange. Very easy to grasp, it is very hard to slip, so it is highly recommended! I will expect how much later it will take! ดูรายละเอียด
ด้ามจับรถแข่ง
ฉันทำกริปแข่งนี้ด้วยการแลกเปลี่ยนแฮนเดิลบาร์ จับง่ายมาก ลื่นยากมาก ขอแนะนำเป็นอย่างยิ่ง! ฉันจะรออีกนานเท่าไหร่! ดูรายละเอียด
แสดงที่มาใช้กับรุ่นรถ: Others
[Webike Monitor] A Design like the Tread pattern of the Tire is smart. Whenever [ which changes Motorcycle handlebars ] Although this Grip is used, a secular change is also few. It lasts long.
[Webike Monitor] A Design like the Tread pattern of the
Tire is smart. Whenever [ which changes
Motorcycle handlebars ] Although this Grip is used, a secular change is also few. It lasts long. ดูรายละเอียด
[Webike Monitor] การออกแบบเหมือนลายดอกยางของ ยางเป็นสมาร์ท เมื่อใดก็ตามที่ [ ซึ่งเปลี่ยนแปลงไป แฮนด์รถมอเตอร์ไซค์ ] แม้ว่าจะใช้กริปนี้ แต่การเปลี่ยนแปลงทางโลกก็มีน้อยเช่นกัน มันกินเวลานาน
[Webike Monitor] การออกแบบเหมือนลายดอกยางของ
แสดงที่มายางเป็นสมาร์ท เมื่อใดก็ตามที่ [ ซึ่งเปลี่ยนแปลงไป
แฮนด์รถมอเตอร์ไซค์ ] แม้ว่าจะใช้กริปนี้ แต่การเปลี่ยนแปลงทางโลกก็มีน้อยเช่นกัน มันกินเวลานาน ดูรายละเอียด