รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
■BodyRated Voltage: DC12V
Outline size: W57 x H40 x D12.3mm *Excluding protruding parts
■Approximate working time: 60 min
คำเตือน
*In case of model-specific kits, do not press the SET button on the main unit alone for more than 1 second.The registered fuel consumption data will be reset and lost.If the data is lost, please re-register it according to the instruction manual of the DG unit.*Not compatible with twin injector models.
*Cannot be installed on bikes with cylinder deactivation.
*This product is only for Kawasaki '25- W230/Meguro S1.Fuel consumption data for the compatible models is already registered.For this product the registered fuel consumption data is measured by Protech for the W230.
*Although the mechanical accuracy of the product is more than 99%, it is necessary to verify the registered fuel consumption data after installation of the product due to individual differences between bikes (tolerances created during the manufacturing process, such as injector jets, pump pressure, and so on).
*By performing this verification, the accuracy after correction of fuel consumption data is more than 99%.
*After installing this product, be sure to verify the correctness of the registered fuel consumption data.
*To complete this verification, reset the usage and residual volume mode after installing the product, and ride with a full tank of gasoline.
*The verification requires riding enough to consume one tank of gasoline.In the case of the W230/Meguro S1, the standard is about 6 to 7 liters.
*Be careful not to run out of gas when performing this verification.
*After completing the verification run, refuel the bike.Compare the amount of fuel used at this time with the fuel value shown on this product.
*If the fueling amount and the value match, no correction is necessary.If they do not match, the fuel consumption data must be corrected.Regarding correction of the data, please refer to [How to correct fuel consumption data] in the user's manual.
*Installation must be carried out correctly according to the instructions.Installing the product in a manner other than that described in the manual may result in fire or other accidents. Also, refer to the service manual issued by the vehicle manufacturer.
*Do not apply strong force to the fuel gauge or pull the wiring (cord) forcibly.
*PROTEC is not responsible for any labor charges or other expenses incurred during the repair process.
*Protec is not responsible for any accidents, malfunctions, or any other damages resulting from the use of this product.
*Protec is not responsible for any costs incurred in the repair or return of defective products, including labor charges and shipping costs.
*PROTEC is not responsible for any malfunctions, accidents, or other damages resulting from the use of this product.
*The image may contain other products.
*There may be changes in product specifications due to the manufacturer's reasons.
ลิ้งค์หน้ารุ่นรถ
ทบทวน
0.0
/ 5
(0 ทบทวน)
