- หน้าแรก
- หมวกกันน็อค
- อุปกรณ์ดูแลรักษาหมวกกันน็อค
- motorimoda
- motorimoda: [Tucano Urbano] Tripode
Please login to check coupons
จำนวน
สินค้าแท้ 100%
รับประกัน 7 วัน
รับเงินคืนฟรี
ราคาสุทธิ
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
[ขนาด]เส้นผ่านศูนย์กลางถ้วยดูด: ประมาณ 29mm
ความสูงของถ้วยดูด: ประมาณ 2 มม.
ความกว้างของเทปสองหน้า:ความสูง
[รวมอะไหล่]
ถ้วยดูดX3,เทปสองหน้า (ตัวสะท้อนแสง) x3
[Size]
Suction cup diameter: Approx. 29mm
Suction cup height: Approx. 22mm
Width of the double-sided tape: Approx. 47mm
[Component]
Sucker x 3, Double-sided tape (reflector) x 3
รายละเอียดคำถาม
เป็น IdeasTool ที่หมวกกันน็อคสามารถใส่ด้านหลังได้..
ส่วนที่ยื่นออกมา 3 จุดช่วยให้วางหมวกกันน็อคบนพื้นได้โดยมีความมั่นคงเหมือนขาตั้งกล้อง จึงไม่ต้องกังวลว่าหมวกกันน็อคจะเสียหาย..
ไอเทมดีไซน์น่ารักๆ ที่ดูเหมือนหมวกกันน๊อคยืนสามขา ดึงดูดความสนใจเป็นอย่างมาก!.
ปลอกคอสามารถเลือกได้ทั้งสีน้ำเงินและสีส้ม..
[วิธีการติดตั้ง]
1. กรุณาทำความสะอาดสิ่งสกปรกบนพื้นผิวของหมวกกันน็อคและเช็ดให้แห้ง..
2. ปริมาณ:ตั้งถ้วยดูดสามถ้วยในส่วนเว้าของกระดาษฐาน และวางบนหมวกกันน็อคขณะถ่ายภาพสามเหลี่ยมด้านเท่า 12 ซม. ต่อด้าน..
3. เมื่อกำหนดตำแหน่งที่จะติดแล้ว ให้ติดเทปกาวสองหน้าที่ติดมาเพื่อปิดทับจากด้านบนของถ้วยดูด.. It is an idea tool that can put a helmet inside out.
You can put the helmet on the ground with stability like a tripod.
This item has an adorable design that looks like a helmet standing on three legs and is sure to get you noticed.
Available in blue and orange.
[fitting instructions]
1. Clean off dirt on the surface of a helmet and dry it well.
2.Set 3 suction cups on the concave part of the base and stick it on the helmet with the image of equilateral triangle of 12cm per side.
3. After you have decided the position to install the unit, apply the supplied double-sided tape over the suction cup.
ส่วนที่ยื่นออกมา 3 จุดช่วยให้วางหมวกกันน็อคบนพื้นได้โดยมีความมั่นคงเหมือนขาตั้งกล้อง จึงไม่ต้องกังวลว่าหมวกกันน็อคจะเสียหาย..
ไอเทมดีไซน์น่ารักๆ ที่ดูเหมือนหมวกกันน๊อคยืนสามขา ดึงดูดความสนใจเป็นอย่างมาก!.
ปลอกคอสามารถเลือกได้ทั้งสีน้ำเงินและสีส้ม..
[วิธีการติดตั้ง]
1. กรุณาทำความสะอาดสิ่งสกปรกบนพื้นผิวของหมวกกันน็อคและเช็ดให้แห้ง..
2. ปริมาณ:ตั้งถ้วยดูดสามถ้วยในส่วนเว้าของกระดาษฐาน และวางบนหมวกกันน็อคขณะถ่ายภาพสามเหลี่ยมด้านเท่า 12 ซม. ต่อด้าน..
3. เมื่อกำหนดตำแหน่งที่จะติดแล้ว ให้ติดเทปกาวสองหน้าที่ติดมาเพื่อปิดทับจากด้านบนของถ้วยดูด.. It is an idea tool that can put a helmet inside out.
You can put the helmet on the ground with stability like a tripod.
This item has an adorable design that looks like a helmet standing on three legs and is sure to get you noticed.
Available in blue and orange.
[fitting instructions]
1. Clean off dirt on the surface of a helmet and dry it well.
2.Set 3 suction cups on the concave part of the base and stick it on the helmet with the image of equilateral triangle of 12cm per side.
3. After you have decided the position to install the unit, apply the supplied double-sided tape over the suction cup.
คำเตือน
*โปรดทราบว่าอุณหภูมิควรสูงกว่า 18 องศาเซลเซียส*ไม่มีถ้วยดูดสำรองหรือเทปกาวสองหน้าสำรอง
*โปรดลองหลาย ๆ ครั้งล่วงหน้าและตัดสินใจเลือกตำแหน่งโปรดของคุณเพื่อให้พอดีกับทิศทางและมุมของหมวกกันน็อคที่คุณชื่นชอบ
* มีสีอื่นในภาพ
* ข้อมูลจำเพาะอาจแตกต่างกันไปขึ้นอยู่กับล็อตการผลิต
* โปรดทราบว่าข้อมูลจำเพาะของผลิตภัณฑ์อาจมีการเปลี่ยนแปลงเนื่องจากเหตุผลของผู้ผลิต *Precautions for installation: The temperature should be above 18 degrees Celsius.
*No replacement suction cups or double-sided tape are included.
*Please try several times afterhand and decide your favorite position to fit your favorite helmet direction and angle.
*The image may contain other colors.
*Specifications may vary depending on the production lot.
*There may be changes in product specifications due to the manufacturer's reasons.
ทบทวน
0.0
/ 5
(0 ทบทวน)
สินค้าที่ดูก่อนหน้า
มีสินค้าในสต๊อกพร้อมจัดส่ง
สินค้าแนะนำ
สินค้าที่เกี่ยวข้อง
สินค้าแนะนำ
สินค้าที่ดูล่าสุด
ใช้คูปอง
รูปภาพรีวิว
Review detail
/