- หน้าแรก
- เครื่องมือ
- เครื่องมือช่าง
- ค้อน
- KIJIMA
- KIJIMA: Thor Replace Face Copper A
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
วัสดุ: ทองแดงสำหรับ Thor Soft Hammers
ผลิตในบริเตนใหญ่
Φ 25mm
น้ำหนักรวม:90 g
Material: copper
for Thor Soft Hammers
Made in Great Britain
Φ 25 mm
Gross weight: 90 g
รายละเอียดคำถาม
เป็นพื้นผิวทองแดงของ TallHammerHWW94-604for Repair
Thor Hammer HWW94-604 repair copper surface.
คำเตือน
*1:ต้องเปลี่ยนหน้าของค้อนก่อนที่ความเสียหายจะเกิดขึ้นกับศีรษะ. อันดับแรก ตรวจสอบให้แน่ใจว่าด้ามจับไม่เสียหาย. หากชำรุดจะต้องเปลี่ยนด้วยขนาด รูปร่าง และประเภทของด้ามจับที่ถูกต้องดังต่อไปนี้. ตรวจสอบให้แน่ใจด้วยว่าด้ามจับไม่หลวมในหัว. หากคลายที่จับ จะต้องได้รับการป้องกันใหม่หรือเปลี่ยนใหม่ ถ้าเป็นไปได้*2:ตัดและลบใบหน้าเก่าให้มากที่สุด. เจาะรูตรงกลางใบหน้า ระวังไม่ให้เจาะเข้าที่ใบหน้า. ถอดใบหน้าออกให้มากที่สุดโดยใช้สว่านหรือเครื่องกัดแบบแบน
*3: คุณอาจจับตรงกลางผิวเก่าแล้วพับเข้าด้านในได้
*4:เมื่อเอาหน้าเก่าออก ให้ใส่หน้าใหม่. ต้องเปิดขอบให้พอดีหน้าใหม่. วิธีที่ดีที่สุดในการดำเนินการนี้คือการใช้เครื่องกดที่เหมาะสมร่วมกับเครื่องมือเปิด/ปิด
*5:โดยที่หน้าใหม่เข้าที่ ให้กลับเครื่องมือผสมแล้วปิดรอบหน้าใหม่ด้วยการกดที่เหมาะสม. อีกครั้งควรปิดขอบให้แน่นพอที่จะยึดใบหน้าให้เข้าที่. เมื่อสวมเข้าที่พอดี ใบหน้าสามารถหมุนได้
*6: ลูกค้าหลายคนเปลี่ยนด้านผิว แต่ด้านทองแดงที่ใช้แล้วยากเป็นพิเศษที่จะเอาออก. ช่องเสียบทองแดงมีร่องเล็ก ๆ ที่ช่วยให้ทองแดงสามารถแพร่กระจายระหว่างการใช้งานได้. ทองแดงที่เราใช้นั้นบริสุทธิ์ 99% นุ่มและสามารถเห็ดบนหัวค้อนได้หลังจากใช้งานไปมาก. เมื่อพื้นผิวหมุนแล้ว ขึ้นอยู่กับการใช้งาน ทองแดงจะมีอายุเกือบไม่มีกำหนดในสถานะนี้โดยไม่มีการเสียรูปเพิ่มเติม. ลูกค้าจำนวนมากพบว่าการหักปลายทองแดงประหยัดกว่า
* โปรดทราบว่าข้อมูลจำเพาะของผลิตภัณฑ์อาจมีการเปลี่ยนแปลงเนื่องจากเหตุผลของผู้ผลิต *1: The face must be replaced before any damage occurs to the hammer head.First, make sure that the handlebar is not damaged.If it is damaged, it should be replaced with one of the followingCorrect size, shape and type of handle.Also make sure the handlebar is not loose in the head.If the handlebar is loosened, it must be re-protected or replaced, if possible.
*2: Cut and remove as much of the old surface as possible.Drill a hole in the center of the face, taking care not to drill into the face.Use a bottom drill or milling machine to use the flats and remove as much of the face as possible.
*3: You may be able to grab the center of the old skin surface and fold it inward in that case.
*4: After the old side is removed, insert the new side.The rim must be opened just enough for the new surface to fit.The best way to perform this operation is a combination of a suitable press and an opening / closing tool.
*5: With the new face in place, reverse the combination tool and close it around the new face with a suitable press.Again, the rim is closed enough to hold the face firmly in place.When correctly mounted, the face can be rotated.
*6: Many customers replace the skin face, but the used copper face is particularly difficult to remove.Copper sockets have small grooves in them, and the copper will enlarge during use.The copper applied to the products is 99% pure, soft, and can mushroom on the hammerhead after considerable use.In this state, depending on the application, the copper lasts almost indefinitely without further deformation once the surface has been set.Many customers find it more economical to use the copper end for destruction.
*There may be changes in product specifications due to the manufacturer's reasons.
ทบทวน
0.0
/ 5
(0 ทบทวน)
สินค้าที่ดูก่อนหน้า
มีสินค้าในสต๊อกพร้อมจัดส่ง
สินค้าแนะนำ
สินค้าที่เกี่ยวข้อง
สินค้าแนะนำ
สินค้าที่ดูล่าสุด
ใช้คูปอง
รูปภาพรีวิว
Review detail
/