- หน้าแรก
- อะไหล่แต่ง
- แฮนค์/อะไหล่แฮนค์
- อะไหล่ชุดคอนโทรล
- การ์ดแฮนด์
- ACERBIS
- ACERBIS: TRI FIT การ์ดแฮนด์ H
รายละเอียดสินค้า
รายละเอียดสินค้าด้านล่างนี้ใช้โปรแกรมแปลอัตโนมัติโดย Google Translate
แสดงต้นฉบับ
คุณสมบัติ
มือจับที่เข้ากันได้: เส้นผ่านศูนย์กลางภายใน: ที่จับอลูมิเนียม / เหล็ก 13.5-19 มมCompatible Handles: Internal diameterΦ13.5-19mm for aluminum / steel handle
รายละเอียดคำถาม
แนวคิดใหม่ของ Hand guard ช่วยให้คุณสามารถเลือกวิธีการติดตั้งได้สามวิธีตามสถานการณ์
รองรับที่จับเหล็ก
ตัวป้องกันมือที่มีความสามารถหลากหลายมีตัวเลือกการติดตั้งที่แตกต่างกันสามแบบ: ตัวยึดแบบปิดเต็ม, ตัวยึดคานมือจับและตัวยึดปลายแฮนด์
AC-16508 ใช้ได้กับแฮนด์อะลูมิเนียมเท่านั้น แต่ด้วยการแปลง SpacerHH05-1 จึงเข้ากันได้กับที่จับเหล็ก
[เมื่อติดตั้งบน CT125 CT110 HUNTER CUBOEMHandlebar].
มันจะกลายเป็นขายึดที่ด้านท้ายเท่านั้น ..
หากคุณกังวลเกี่ยวกับการรบกวนของ Lever คุณสามารถชดเชย Lever ไปด้านในเปลี่ยนมุมหรือใช้คันโยกแบบสั้นของ AfterMarket เป็นต้น. กรุณาตอบกลับด้วย ■New concept handguard with three different mounting methods to choose from according to the situation
■Steel handle compatible
The multi-talented handguard can be mounted in three different ways, including full-close mounting, cantilever handle mounting, and bar-end mounting.
This set includes the conversion spacer HH05-1 added to the AC-16508, which is only compatible with aluminum handles, and is also compatible with steel handles.
[For installation on CT125 Hunter Cub stock handlebar]
It is a cantilever mount with the end side only.
If you are concerned about interference with the lever, you can offset the lever inward, change the angle, or use an aftermarket short lever.
รองรับที่จับเหล็ก
ตัวป้องกันมือที่มีความสามารถหลากหลายมีตัวเลือกการติดตั้งที่แตกต่างกันสามแบบ: ตัวยึดแบบปิดเต็ม, ตัวยึดคานมือจับและตัวยึดปลายแฮนด์
AC-16508 ใช้ได้กับแฮนด์อะลูมิเนียมเท่านั้น แต่ด้วยการแปลง SpacerHH05-1 จึงเข้ากันได้กับที่จับเหล็ก
[เมื่อติดตั้งบน CT125 CT110 HUNTER CUBOEMHandlebar].
มันจะกลายเป็นขายึดที่ด้านท้ายเท่านั้น ..
หากคุณกังวลเกี่ยวกับการรบกวนของ Lever คุณสามารถชดเชย Lever ไปด้านในเปลี่ยนมุมหรือใช้คันโยกแบบสั้นของ AfterMarket เป็นต้น. กรุณาตอบกลับด้วย ■New concept handguard with three different mounting methods to choose from according to the situation
■Steel handle compatible
The multi-talented handguard can be mounted in three different ways, including full-close mounting, cantilever handle mounting, and bar-end mounting.
This set includes the conversion spacer HH05-1 added to the AC-16508, which is only compatible with aluminum handles, and is also compatible with steel handles.
[For installation on CT125 Hunter Cub stock handlebar]
It is a cantilever mount with the end side only.
If you are concerned about interference with the lever, you can offset the lever inward, change the angle, or use an aftermarket short lever.
คำเตือน
* มีบางกรณีที่มีสีอื่นในภาพถ่าย* โปรดทราบว่าข้อมูลจำเพาะของผลิตภัณฑ์อาจมีการเปลี่ยนแปลงเนื่องจากเหตุผลของผู้ผลิต *Images may contain other colors.
*There may be changes in product specifications due to the manufacturer's reasons.
ทบทวน
0.0
/ 5
(0 ทบทวน)
สินค้าที่ดูก่อนหน้า
มีสินค้าในสต๊อกพร้อมจัดส่ง
สินค้าแนะนำ
สินค้าที่เกี่ยวข้อง
สินค้าแนะนำ
สินค้าที่ดูล่าสุด
ใช้คูปอง
รูปภาพรีวิว
Review detail
/